EN 20-1:1992 Wood preservatives – Determination of the protective effectiveness against Lyctus Brunneus (Stephens) – Part 1: Application by surface treatment (laboratory method)
EN 20-2:1993 Wood preservatives – Determination of the protective effectiveness against Lyctus brunneus (Stephens) – Part 2: Application by impregnation (Laboratory method)
EN 2002-001:2005 Aerospace series – Metallic materials – Test methods – Part 1: Tensile testing at ambient temperature
EN 2002-002:2005 Aerospace series – Metallic materials – Test methods – Part 2: Tensile testing at elevated temperature
EN 2002-005:2007 Aerospace series – Test methods for metallic materials – Part 005: Uninterrupted creep and stress-rupture testing
EN 2002-16:2019 Aerospace series – Metallic materials – Test methods – Part 16: Non-destructive testing – Penetrant testing
EN 2002-21:2019 Aerospace series – Metallic materials – Test methods – Part 21: Radiographic testing of castings
EN 2003-009:2007 Aerospace series – Test methods – Titanium and titanium alloys – Part 009: Determination of surface contamination
EN 2003-010:2007 Aerospace series – Titanium and titanium alloys – Test methods – Part 010: Sampling for determination of hydrogen content
EN 2004-1:1993 Aerospace series – Test methods for aluminium and aluminium alloy products – Part 1: Determination of electrical conductivity of wrought aluminium alloys
EN 2004-5:1993 Aerospace series – Test methods for aluminium alloys products – Part 5: Determination of cladding thickness and copper diffusion of clad semi-finished products
EN 2004-7:2017 Aerospace series – Test methods for aluminium and aluminium alloy products – Part 7:
EN 2009:1984 Bearings, airframe rolling, rigid, single row ball bearings in steel, diameter series 8 and 9 – Dimensions and loads – Aerospace series
EN 200:2008 Sanitary tapware – Single taps and combination taps for water supply systems of type 1 and type 2 – General technical specification
EN 20105-A02:1994 Textiles – Tests for colour fastness – Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
EN 20105-N01:1995 Textiles – Tests for colour fastness – Part N01: Colour fastness to bleaching: Hypochlorite (ISO 105-N01:1993)
EN 2011:1984 Bearings, airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 8 and 9 – Dimensions and loads – Aerospace series
EN 2012:1984 Bearings, airframe rolling, rigid, single row ball bearings in steel, diameter series 0 and 2 – Dimensions and loads – Aerospace series
EN 2014:1984 Bearings, airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 0 and 2 – Dimensions and loads – Aerospace series
EN 2015:1984 Bearings, airframe rolling, double row, self aligning ball bearings in steel, diameter series 2 – Dimensions and loads – Aerospace series
EN 2017:1984 Bearings, airframe rolling, double row, self aligning ball bearings, in corrosion resisting steel, diameter series 2 – Dimensions and loads – Aerospace series
EN 20187:1993 Paper, board and pulps – Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990)
EN 2018:1984 Bearings, airframe rolling, single row, self aligning roller bearings in steel, diameter series 3 and 4 – Dimensions and loads – Aerospace series
EN 2020:1984 Bearings, airframe rolling, single row, self aligning roller bearings in corrosion resisting steel, diameter series 3 and 4 – Dimensions and loads – Aerospace series
EN 2022:1988 Aerospace series – Bearings, spherical plain in corrosion resisting steel with selflubricating liner – Light series – Dimensions and loads
EN 2022:1988/AC1:1988 Aerospace series – Bearings, spherical plain in corrosion resisting steel with selflubricating liner – Light series – Dimensions and loads
EN 20273:1991 Fasteners – Clearance holes for bolts and screws (ISO 273:1979)
EN 203-1:2014 Gas heated catering equipment – Part 1: General safety rules
EN 203-1:2014/AC:2016 Gas heated catering equipment – Part 1: General safety rules
EN 203-2-10:2007 Gas heated catering equipment – Part 2-10: Specific requirements – Chargrills
EN 203-2-11:2006 Gas heated catering equipment – Part 2-11: Specific requirements – Pasta cookers
EN 203-2-1:2014 Gas heated catering equipment – Part 2-1: Specific requirements – Open burners and wok burners
EN 203-2-2:2006 Gas heated catering equipment – Part 2-2: Specific requirements – Ovens
EN 203-2-3:2014 Gas heated catering equipment – Part 2-3: Specific requirements – Boiling pans
EN 203-2-4:2005 Gas heated catering equipment – Part 2-4: Specific requirements – Fryers
EN 203-2-6:2005 Gas heated catering equipment – Part 2-6: Specific requirements – Hot water heaters for beverage
EN 203-2-7:2014 Gas heated catering equipment – Part 2-7: Specific requirements – Salamanders and rotisseries
EN 203-2-8:2005 Gas heated catering equipment – Part 2-8: Specific requirements – Brat pans and paëlla cookers
EN 203-2-9:2005 Gas heated catering equipment – Part 2-9: Specific requirements – Solid tops, warming plates and griddles
EN 2030:2013 Aerospace series – Steel X105CrMo17 (1.3544) – Hardened and tempered – Bars – De ≤ 150 mm
EN 2031:2018 Aerospace series – Steel 102Cr6 (1.2067) – Hardened and tempered – Bars
EN 2032-001:2014 Aerospace series – Metallic materials – Part 001: Conventional designation
EN 2032-2:1994 Aerospace series – Metallic materials – Part 2: Coding of metallurgical condition in delivery condition
EN 2033:2017 Aerospace series – Strips, cold rolled in steel, Thickness 0,1 mm ≤ a ≤ 2,5 mm – Dimensions
EN 2034:2017 Aerospace series – Round steel bars drawn and/or descaled – Dimensions – Tolerance h 11
EN 2036:2017 Aerospace series – Round steel bars ground – Dimensions – Tolerance h 8
EN 2037:2017 Aerospace series – Hexagonal steel bars drawn – Dimensions – Tolerances h 11 and h 12
EN 2040:2017 Aerospace series – Rectangular steel bars rolled – Dimensions – Tolerance js 16
EN 2043:2013 Aerospace series – Metallic materials – General requirements for semi-finished product qualification (excluding forgings and castings)
EN 2044:2001 Aerospace series – Round bars, drawn, in aluminium and aluminium alloys – Tolerance class h 11 – Diameter 4 mm < D < 63 mm – Dimensions
EN 2045:2001 Aerospace series – Square bars, drawn in aluminium and aluminium alloys – Tolerance class h 11 – Thickness 6 mm < a < 50 mm – Dimensions
EN 2046:2001 Aerospace series – Hexagonal bars, drawn in aluminium and aluminium alloys – Tolerance class h 11 – Width across flats 7 mm < a < 50 mm – Dimensions
EN 2047:2001 Aerospace series – Beaded L-section extruded, in aluminium alloys – Dimensions
EN 2048:2001 Aerospace series – Extruded L-section, in aluminium alloys – Dimensions
EN 2049:2001 Aerospace series – Extruded channel section, in aluminium alloys – Dimensions
EN 204:2016 Classification of thermoplastic wood adhesives for non-structural applications
EN 2050:2001 Aerospace series – Extruded T-section, in aluminium alloys – Dimensions
EN 2053:2017 Aerospace series – U-section aluminium alloy folded profiles – Dimensions
EN 205:2016 Adhesives – Wood adhesives for non-structural applications – Determination of tensile shear strength of lap joints
EN 2063:1992 Aerospace series – Airframe rolling bearings – Technical specifications
EN 2064:1992 Aerospace series – Bearings, spherical plain in corrosion resisting steel with selflubricating liner – Technical specification
EN 2066:2001 Aerospace series – Extruded section in aluminium alloys – General tolerances
EN 2067:1996 Aerospace series – Rod ends with self-aligning ball bearings – Technical specification
EN 2067:1996/AC:1996 Aerospace series – Rod ends with self-aligning ball bearings – Technical specification
EN 2068:1996 Aerospace series – Rod ends with self-lubricating self-aligning bearings – Technical specification
EN 2068:1996/AC:1996 Aerospace series – Rod ends with self-lubricating self-aligning bearings – Technical specification
EN 20693:1991 Dimensions of seam welding wheel blanks (ISO 693:1982)
EN 206:2013+A1:2016 Concrete – Specification, performance, production and conformity
EN 2070-4:1989 Aerospace series – Aluminium and aluminium alloy wrought products – Technical specification – Part 4: Tube for structures
EN 2070-5:1989 Aerospace series – Aluminium and aluminium alloy wrought products – Technical specification – Part 5: Tube used under pressure
EN 2070-6:1989 Aerospace series – Aluminium and aluminium alloy wrought products – Technical specification – Part 6: Rivet wire
EN 2071:2001 Aerospace series – Sheets in aluminium and aluminium alloys – Thickness 0,25 mm < a < 6 mm – Dimensions
EN 2072:2005 Aerospace series – Aluminium AL-P1050A – H14 – Sheet and strip – 0,4 mm <=”” td=””>
EN 2076-1:1989 Aerospace series – Aluminium and magnesium alloy ingots and castings – Technical specification – Part 1: General requirements
EN 2076-1:1989/A1:1993 Aerospace series – Aluminium and magnesium alloy ingots and castings – Technical specification – Part 1: General requirements
EN 2076-2:1989 Aerospace series – Aluminium and magnesium alloy ingots and castings – Technical specification – Part 2: Ingots for remelting
EN 2076-3:1989 Aerospace series – Aluminium and magnesium alloy ingots and castings – Technical specification – Part 3: Pre-production and production castings
EN 2078:2001 Aerospace series – Metallic materials – Manufacturing schedule, inspection schedule, inspection and test report – Definition, general principles, preparation and approval
EN 2079:1995 Aerospace series – Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment – Dimensions and loads
EN 207:2017 Personal eye-protection equipment – Filters and eye-protectors against laser radiation (laser eye-protectors)
EN 2082-3:1989 Aerospace series – Aluminium alloy forging stock and forgings – Technical specification – Part 3: Pre-production and production forgings
EN 2083:2001 Aerospace series – Copper and copper alloys conductors for electrical cables – Product standard
EN 2084:2018 Aerospace series – Cables, electrical, general purpose, with conductors in copper or copper alloy – Technical specification
EN 2085:2004 Aerospace series – Aluminium alloy AL-P2618A – T6 – Hand and die forgings – a
EN 20865:1991 Slots in plates for projection welding machines (ISO 865:1981)
EN 2086:2004 Aerospace series – Aluminium alloy AL-P2618A – T851 – Hand and die forgings – a
EN 2087:2005 Aerospace series – Aluminium alloy AL-P2014A – T6 or T62 – Clad sheet and strip – 0,4 mm <=”” td=””>
EN 2088:2005 Aerospace series – Aluminium alloy AL-P2014A – T4 or T42 – Clad sheet and strip – 0,4 mm <=”” td=””>
EN 20898-7:1995 Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)
EN 2089:2005 Aerospace series – Aluminium alloy AL-P2014A-T6 or T62 – Sheet and strip – 0,4 mm <=”” td=””>
EN 208:2009 Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
EN 2090:2005 Aerospace series – Aluminium alloy AL-P2024-T3 – Clad sheet and strip 0,3 mm <=”” td=””>
EN 2092:2005 Aerospace series – Aluminium alloy AL-P7075-T6 or T62 – Clad sheet and strip – 0,4 mm <=”” td=””>
EN 2093:1992 Aerospace series – Aluminium alloy AL-P7009-T74 – Hand forgings 20 mm < or = a < or = 150 mm
EN 2094:1992 Aerospace series – Aluminium alloy AL-P7009-T74 – Die forgings 3 mm < or = a < or = 150 mm
EN 2100:1992 Aerospace series – Aluminium alloy AL-P2014A T4511 – Extruded bars and sections a or D < or = 200 mm
EN 2101:1991 Aerospace series – Chromic acid anodizing of aluminium and wrought aluminium alloys
EN 2103-1:1991 Aerospace series – Steel, nickel base and cobalt base alloy remelting stock and castings – Technical specifications – Part 1: General requirements
EN 2103-2:1991 Aerospace series – Steel, nickel base and cobalt base alloy remelting stock and castings – Technical specification – Part 2: Remelting stock
EN 2103-3:1991 Aerospace series – Steel, nickel base and cobalt base alloy remelting stock and castings – Technical specifications – Part 3: Pre-production and production castings
EN 2104:1996 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Hardness 40 IRHD
EN 21089:1991 Electrode taper fits for spot welding equipment – Dimensions (ISO 1089:1980)
EN 2114:2019 Aerospace series – Aluminium 1050A-H14 – Wire for solid rivets – D ≤ 10 mm
EN 2115:2009 Aerospace series – Aluminium alloy 2117-T42 – Wire for solid rivets – D ≤ 10 mm
EN 2116:2009 Aerospace series – Aluminium alloy 2017A-T42 – Wire for solid rivets – D ≤ 10 mm
EN 2117:2009 Aerospace series – Aluminium alloy AL-P5056A (5056A)-H32 – Wire for solid rivets – D ≤ 10 mm
EN 2119:2017 Aerospace series – Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) – Solution treated and precipitation treated – Wires for rivets – 2 mm ≤ D ≤ 10 mm – Rm ≥ 960 MPa
EN 2122:1996 Aerospace series – Washers, flat, in aluminium alloy, anodized or chromated
EN 2125:2019 Aerospace series – Aluminium alloy Al-P16- – T6151 – Plates – 6 mm < a ≤ 120 mm
EN 2126:1992 Aerospace series – Aluminium alloy AL-P7075-T651 – Plates 6 mm < a < or = 80 mm
EN 2127:1992 Aerospace series – Aluminium alloy AL-P7075-T73511 – Extruded bars and sections a or D < or = 100 mm
EN 2128:1992 Aerospace series – Aluminium alloy AL-P7075-T7351 – Drawn bars 6 mm < or = a or D < or = 75 mm
EN 212:2003 Wood preservatives – General guidance on sampling and preparation for analysis of wood preservatives and treated timber
EN 2130:2001 Aerospace series – Bearings, precision ball in corrosion resisting steel for instruments and equipment – Technical specification
EN 2131:2001 Aerospace series – Plates in aluminium alloys – Thickness 6 mm < a < 160 mm – Dimensions
EN 2133:2010 Aerospace series – Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys
EN 2134:2001 Aerospace series – Round bars, extruded in aluminium and aluminium alloys – Diameter 10 mm < D < 220 mm – Dimensions
EN 2135:2017 Aerospace series – Steel FE-PL61 – Carburized, hardened and tempered – Bar – De ≤ 40 mm
EN 2137:2017 Aerospace series – Steel FE-PL75 – 1 100 MPa ≤ Rm ≤ 1 250 MPa – Bars – De ≤ 100 mm
EN 2138:1999 Aerospace series – Washers, flat, in steel, cadmium plated
EN 2139:1989 Aerospace series – Washers, flat heat resisting steel
EN 2143:1992 Aerospace series – Rivets, solid, universal head, in aluminium 1050A, inch based series
EN 2144:1994 Aerospace series – Rivets, solid, universal head, in aluminium alloy 2117, inch based series
EN 2145:1994 Aerospace series – Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series
EN 2146:1992 Aerospace series – Rivets, solid, universal head, in aluminium alloy 2017A, inch based series
EN 2148:1992 Aerospace series – Rivets, solid, universal head, in aluminium alloy 5056A, inch based series
EN 2149:1996 Aerospace series – Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series
EN 2155-12:1997 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 12: Determination of linear thermal expansion
EN 2155-13:1993 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 13: Determination of temperature at deflection under load
EN 2155-14:1993 Aerospace series – Test methods for tranparent materials for aircraft glazing – Part 14: Determination of the 1/10 Vicat softening temperature
EN 2155-19:1996 Aerospace series – Test methods for transparent materials for aircraft materials for aircraft glazing – Part 19: Determination of craze resistance
EN 2155-21:1989 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 21: Determination of resistance to crack propagation (K factor)
EN 2155-2:1993 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 2: Determination of water absorption
EN 2155-3:1993 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 3: Determination of refractive index
EN 2155-5:1989 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 5: Determination of visible light transmission
EN 2155-7:1997 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 7: Determination of optical deviation
EN 2155-8:1989 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 1: Determination of optical distortion
EN 2155-9:1989 Aerospace series – Test method for transparent materials for aircraft glazing – Part 9 : Determination of haze
EN 2157-1:1993 Aerospace series – Steel – Forging stock and forgings – Technical specification – Part 1: General requirements
EN 2157-2:1993 Aerospace series – Steel – Forging stock and forgings – Technical specification – Part 2: Forging stock
EN 2157-3:1993 Aerospace series – Steel – Forging stock and forgings – Technical specification – Part 3: Pre-production and production forgings
EN 215:2019 Thermostatic radiator valves – Requirements and test methods
EN 2174:2017 Aerospace series – Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) – Solution treated and precipitation treated – Forgings – De ≤ 100 mm – Rm ≥ 850 MPa
EN 2205:2009 Aerospace series – Steel FE-PL1502 (25CrMo4) – 900 MPa ≤ Rm ≤ 1 100 MPa – Bars – De ≤ 40 mm
EN 2206:2008 Aerospace series – Steel FE-PL1502 (25CrMo4) – 650 MPa ≤ Rm ≤ 850 MPa – Bars – De ≤ 150 mm
EN 2209:2008 Aerospace series – Steel FE-PL1502 (25CrMo4) – 900 MPa ≤ Rm ≤ 1 100 MPa – Sheets, strips and plates – 0,5 mm ≤ a ≤ 20 mm
EN 2213:2012 Aerospace series – Steel FE-PL1505 (15CrMoV6) – Air melted – Hardened and tempered – Bars – De ≤ 16 mm – 980 MPa ≤ Rm ≤ 1 180 MPa
EN 22206:1992 Packaging – Complete, filled transport packages – Identification of parts when testing (ISO 2206:1987)
EN 2221:2017 Aerospace series – Steel FE-PL31 – Hardened and tempered – Hollow bars – 3,5 mm ≤ a ≤ 55 mm
EN 2222:2017 Aerospace series – Steel FE-PL31 – Hardened and tempered – Hand and die forgings
EN 22248:1992 Packaging – Complete, filled transport packages – Vertical impact test by dropping (ISO 2248:1985)
EN 2226:2014 Aerospace series – Steel X105CrMo17 (1.4125) – Hardened and tempered – Hand and die forgings – De ≤ 150 mm
EN 22313:1992 Textile fabrics – Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery
EN 22339:1992 Taper pins, unhardened (ISO 2339:1986)
EN 22340:1992 Clevis pins without head (ISO 2340:1986)
EN 22341:1992 Clevis pins with head (ISO 2341:1986)
EN 2234:2018 Aerospace series – Cable, electrical, fire resistant – Technical specification
EN 2235:2015 Aerospace series – Single and multicore electrical cables, screened and jacketed – Technical specification
EN 2236:1992 Aerospace series – Pins, headed, close tolerance shank, in alloy steel – Technical specifications
EN 2240-001:2009 Aerospace series – Lamps, incandescent – Part 001: Technical specification
EN 2240-002:2009 Aerospace series – Lamps, incandescent – Part 002: Main characteristics
EN 2240-003:2010 Aerospace series – Lamps, incandescent – Part 003: Lamp, code 44 – Product standard
EN 2240-004:2010 Aerospace series – Lamps, incandescent – Part 004: Lamp, code 47 – Product standard
EN 2240-005:2009 Aerospace series – Lamps, incandescent – Part 005: Lamp, code 73 – Product standard
EN 2240-006:2009 Aerospace series – Lamps, incandescent – Part 006: Lamp, code 73E – Product standard
EN 2240-007:2009 Aerospace series – Lamps, incandescent – Part 007: Lamp, code 74 – Product standard
EN 2240-008:2009 Aerospace series – Lamps, incandescent – Part 008: Lamp, code 75 – Product standard
EN 2240-009:2009 Aerospace series – Lamps, incandescent – Part 009: Lamp, code 83 – Product standard
EN 2240-010:2010 Aerospace series – Lamps, incandescent – Part 010: Lamp, code 84 – Product standard
EN 2240-011:2010 Aerospace series – Lamps, incandescent – Part 011: Lamp, code 85 – Product standard
EN 2240-012:2010 Aerospace series – Lamps, incandescent – Part 012: Lamp, code 95 – Product standard
EN 2240-013:2010 Aerospace series – Lamps, incandescent – Part 013: Lamp, code 301 – Product standard
EN 2240-014:2010 Aerospace series – Lamps, incandescent – Part 014: Lamp, code 303 – Product standard
EN 2240-015:2010 Aerospace series – Lamps, incandescent – Part 015: Lamp, code 304 – Product standard
EN 2240-016:2010 Aerospace series – Lamps, incandescent – Part 016: Lamp, code 305 – Product standard
EN 2240-017:2010 Aerospace series – Lamps, incandescent – Part 017: Lamp, code 306 – Product standard
EN 2240-018:2010 Aerospace series – Lamps, incandescent – Part 018: Lamp, code 307 – Product standard
EN 2240-019:2010 Aerospace series – Lamps, incandescent – Part 019: Lamp, code 308 – Product standard
EN 2240-020:2010 Aerospace series – Lamps, incandescent – Part 020: Lamp, code 311 – Product standard
EN 2240-021:2010 Aerospace series – Lamps, incandescent – Part 021: Lamp, code 313 – Product standard
EN 2240-022:2010 Aerospace series – Lamps, incandescent – Part 022: Lamp, code 315 – Product standard
EN 2240-023:2010 Aerospace series – Lamps, incandescent – Part 023: Lamp, code 316 – Product standard
EN 2240-024:2010 Aerospace series – Lamps, incandescent – Part 024: Lamp, code 327 – Product standard
EN 2240-025:2010 Aerospace series – Lamps, incandescent – Part 025: Lamp, code 328 – Product standard
EN 2240-026:2010 Aerospace series – Lamps, incandescent – Part 026: Lamp, code 330 – Product standard
EN 2240-027:2010 Aerospace series – Lamps, incandescent – Part 027: Lamp, code 334 – Product standard
EN 2240-028:2010 Aerospace series – Lamps, incandescent – Part 028: Lamp, code 337 – Product standard
EN 2240-029:2010 Aerospace series – Lamps, incandescent – Part 029: Lamp, code 338 – Product standard
EN 2240-030:2010 Aerospace series – Lamps, incandescent – Part 030: Lamp, code 345 – Product standard
EN 2240-031:2010 Aerospace series – Lamps, incandescent – Part 031: Lamp, code 356 – Product standard
EN 2240-032:2010 Aerospace series – Lamps, incandescent – Part 032: Lamp, code 376 – Product standard
EN 2240-033:2010 Aerospace series – Lamps, incandescent – Part 033: Lamp, code 377 – Product standard
EN 2240-034:2010 Aerospace series – Lamps, incandescent – Part 034: Lamp, code 382 – Product standard
EN 2240-035:2010 Aerospace series – Lamps, incandescent – Part 035: Lamp, code 387 – Product standard
EN 2240-036:2010 Aerospace series – Lamps, incandescent – Part 036: Lamp, code 388 – Product standard
EN 2240-037:2010 Aerospace series – Lamps, incandescent – Part 037: Lamp, code 394 – Product standard
EN 2240-038:2010 Aerospace series – Lamps, incandescent – Part 038: Lamp, code 401 – Product standard
EN 2240-039:2010 Aerospace series – Lamps, incandescent – Part 039: Lamp, code 600 – Product standard
EN 2240-040:2010 Aerospace series – Lamps, incandescent – Part 040: Lamp, code 680 – Product standard
EN 2240-041:2010 Aerospace series – Lamps, incandescent – Part 041: Lamp, code 682 – Product standard
EN 2240-042:2010 Aerospace series – Lamps, incandescent – Part 042: Lamp, code 683 – Product standard
EN 2240-043:2010 Aerospace series – Lamps, incandescent – Part 043: Lamp, code 685 – Product standard
EN 2240-044:2010 Aerospace series – Lamps, incandescent – Part 044: Lamp, code 713 – Product standard
EN 2240-045:2010 Aerospace series – Lamps, incandescent – Part 045: Lamp, code 714 – Product standard
EN 2240-046:2010 Aerospace series – Lamps, incandescent – Part 046: Lamp, code 715 – Product standard
EN 2240-047:2010 Aerospace series – Lamps, incandescent – Part 047: Lamp, code 718 – Product standard
EN 2240-048:2010 Aerospace series – Lamps, incandescent – Part 048: Lamp, code 718 NPC – Product standard
EN 2240-049:2010 Aerospace series – Lamps, incandescent – Part 049: Lamp, code 757 – Product standard
EN 2240-050:2010 Aerospace series – Lamps, incandescent – Part 050: Lamp, code 1064 – Product standard
EN 2240-051:2011 Aerospace series – Lamps, incandescent – Part 051: Lamp, code 1163 – Product standard
EN 2240-052:2011 Aerospace series – Lamps, incandescent – Part 052: Lamp, code 1222 – Product standard
EN 2240-053:2011 Aerospace series – Lamps, incandescent – Part 053: Lamp, code 1308 – Product standard
EN 2240-054:2011 Aerospace series – Lamps, incandescent – Part 054: Lamp, code 1317 – Product standard
EN 2240-055:2011 Aerospace series – Lamps, incandescent – Part 055: Lamp, code 1495 – Product standard
EN 2240-056:2011 Aerospace series – Lamps, incandescent – Part 056: Lamp, code 1506 – Product standard
EN 2240-057:2011 Aerospace series – Lamps, incandescent – Part 057: Lamp, code 1512 – Product standard
EN 2240-058:2011 Aerospace series – Lamps, incandescent – Part 058: Lamp, code 1524 – Product standard
EN 2240-059:2011 Aerospace series – Lamps, incandescent – Part 059: Lamp, code 1591 – Product standard
EN 2240-060:2011 Aerospace series – Lamps, incandescent – Part 060: Lamp, code 1619 – Product standard
EN 2240-061:2011 Aerospace series – Lamps, incandescent – Part 061: Lamp, code 1683 – Product standard
EN 2240-062:2011 Aerospace series – Lamps, incandescent – Part 062: Lamp, code 1810 – Product standard
EN 2240-063:2011 Aerospace series – Lamps, incandescent – Part 063: Lamp, code 1815 – Product standard
EN 2240-064:2011 Aerospace series – Lamps, incandescent – Part 064: Lamp, code 1819 – Product standard
EN 2240-065:2011 Aerospace series – Lamps, incandescent – Part 065: Lamp, code 1820 – Product standard
EN 2240-066:2011 Aerospace series – Lamps, incandescent – Part 066: Lamp, code 1829 – Product standard
EN 2240-067:2011 Aerospace series – Lamps, incandescent – Part 067: Lamp, code 1843 – Product standard
EN 2240-068:2011 Aerospace series – Lamps, incandescent – Part 068: Lamp, code 1864 – Product standard
EN 2240-069:2011 Aerospace series – Lamps, incandescent – Part 069: Lamp, code 1978 – Product standard
EN 2240-070:2011 Aerospace series – Lamps, incandescent – Part 070: Lamp, code 2232 – Product standard
EN 2240-071:2011 Aerospace series – Lamps, incandescent – Part 071: Lamp, code 3011 – Product standard
EN 2240-072:2011 Aerospace series – Lamps, incandescent – Part 072: Lamp, code 3912 – Product standard
EN 2240-073:2011 Aerospace series – Lamps, incandescent – Part 073: Lamp, code 4174 – Product standard
EN 2240-074:2011 Aerospace series – Lamps, incandescent – Part 074: Lamp, code 5086 – Product standard
EN 2240-075:2011 Aerospace series – Lamps, incandescent – Part 075: Lamp, code 5448 – Product standard
EN 2240-076:2011 Aerospace series – Lamps, incandescent – Part 076: Lamp, code 5678 – Product standard
EN 2240-077:2011 Aerospace series – Lamps, incandescent – Part 077: Lamp, code 6832 – Product standard
EN 2240-078:2011 Aerospace series – Lamps, incandescent – Part 078: Lamp, code 6838 – Product standard
EN 2240-079:2011 Aerospace series – Lamps, incandescent – Part 079: Lamp, code 6839 – Product standard
EN 2240-080:2011 Aerospace series – Lamps, incandescent – Part 080: Lamp, code 7007-704 – Product standard
EN 2240-081:2011 Aerospace series – Lamps, incandescent – Part 081: Lamp, code 7070 – Product standard
EN 2240-082:2011 Aerospace series – Lamps, incandescent – Part 082: Lamp, code 7079 – Product standard
EN 2240-083:2011 Aerospace series – Lamps, incandescent – Part 083: Lamp, code 7152 – Product standard
EN 2240-084:2011 Aerospace series – Lamps, incandescent – Part 084: Lamp, code 7153 – Product standard
EN 2240-085:2011 Aerospace series – Lamps, incandescent – Part 085: Lamp, code 7265 – Product standard
EN 2240-086:2011 Aerospace series – Lamps, incandescent – Part 086: Lamp, code 7333 – Product standard
EN 2240-087:2011 Aerospace series – Lamps, incandescent – Part 087: Lamp, code 7341 – Product standard
EN 2240-088:2011 Aerospace series – Lamps, incandescent – Part 088: Lamp, code A7512-12 – Product standard
EN 2240-089:2011 Aerospace series – Lamps, incandescent – Part 089: Lamp, code A7512-24 – Product standard
EN 2240-090:2011 Aerospace series – Lamps, incandescent – Part 090: Lamp, code 7683 – Product standard
EN 2240-091:2011 Aerospace series – Lamps, incandescent – Part 091: Lamp, code 7714 – Product standard
EN 2240-092:2011 Aerospace series – Lamps, incandescent – Part 092: Lamp, code 7715 – Product standard
EN 2240-093:2011 Aerospace series – Lamps, incandescent – Part 093: Lamp, code 7839 – Product standard
EN 2240-094:2011 Aerospace series – Lamps, incandescent – Part 094: Lamp, code 8022 – Product standard
EN 2240-095:2011 Aerospace series – Lamps, incandescent – Part 095: Lamp, code 8552 – Product standard
EN 2240-096:2011 Aerospace series – Lamps, incandescent – Part 096: Lamp, code 72301-6 – Product standard
EN 2240-097:2011 Aerospace series – Lamps, incandescent – Part 097: Lamp, code 72601-12 – Product standard
EN 2240-098:2011 Aerospace series – Lamps, incandescent – Part 098: Lamp, code 416650 – Product standard
EN 2240-099:2011 Aerospace series – Lamps, incandescent – Part 099: Lamp, code 416700 – Product standard
EN 2240-100:2011 Aerospace series – Lamps, incandescent – Part 100: Lamp, code 2078 – Product standard
EN 2240-101:2011 Aerospace series – Lamps, incandescent – Part 101: Lamp, code 404-02 – Product standard
EN 2241:2010 Aerospace series – Lamp caps – Dimensions
EN 2242:2012 Aerospace series – Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
EN 2243-1:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 1: Single lap shear
EN 2243-2:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 2: Peel metal-metal
EN 2243-3:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 3: Peeling test metal-honeycomb core
EN 2243-4:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 4: Metal-honeycomb core flatwise tensile test
EN 2243-5:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 5: Ageing tests
EN 2243-6:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 6: Determination of shear stress and shear strain
EN 2245:2012 Aerospace series – Pipelines for liquids and gases – Definitions
EN 225-1:2007 Atomizing oil burners – Oil burner pumps and oil burner motors – Connecting dimensions – Part 1: Oil burner pumps
EN 225-2:2007 Atomizing oil burners – Oil burner pumps and oil burner motors – Connecting dimensions – Part 2: Oil burner motors
EN 2252:2012 Aerospace series – Steel FE-PL1505 (15CrMoV6) – 1 080 MPa ≤ Rm ≤ 1 250 MPa – Forgings – De ≤ 100 mm
EN 22568:1989 Hand- and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988)
EN 2256:2004 Aerospace series – Aluminium alloy AL-P2618A – T852 – Hand and die forgings – a
EN 2257:1997 Aerospace series – Circular tubes for structures in aluminium and aluminium alloys – Diameter 6 mm <= D <= 100 mm – Thickness 1 mm <= a <= 6 mm – Dimensions
EN 2258:1997 Aerospace series – Circular tubes for fluids in aluminium and aluminium alloys – Diameter 3,2 mm <= D <= 100 mm – Thickness 0,6 mm <= a <= 2,5 mm – Dimensions
EN 2259:1995 Aerospace series – Silicone rubber (VMQ) – Hardness 50 IRHD
EN 2260:1995 Aerospace series – Silicone rubber (VMQ) – Hardness 60 IRHD
EN 2261:1995 Aerospace series – Silicone rubber (VMQ) – Hardness 70 IRHD
EN 2262:1995 Aerospace series – Silicone rubber (VMQ/PVMQ) with high tear strength – Hardness 50 IRHD
EN 2264:1996 Aerospace series – Nuts, anchor, self-locking, floating, two lug, incremental counterbore,
EN 2266-002:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 002: General
EN 2266-003:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 003: Ink jet printable – Product standard
EN 2266-005:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 005: UV laser printable – Product standard
EN 2266-007:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures
EN 2266-008:2015 Aerospace series – Cables, electrical, for general purpose – Operating temperatures
EN 2267-002:2015 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between -55 °C and 260 °C – Part 002: General
EN 2267-003:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 003: Ink jet printable – Product standard
EN 2267-005:2006 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 005: UV laser printable – Product standard
EN 2267-007:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures
EN 2267-008:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures
EN 2267-009:2017 Aerospace series – Cables, electrical, for general purpose – Operating temperatures
EN 2267-010:2018 Aerospace series – Cables, electrical, for general purpose – Operating temperatures
EN 2267-011:2015 Aerospace series – Cables, electrical, for general purpose – Operating temperatures
EN 2267-012:2015 Aerospace series – Cables, electrical, for general purpose – Operating temperatures
EN 226:1987 Atomizing oil burners – Connecting dimensions between burners and heat generators
EN 226:1987/AC1:1987 Atomizing oil burners – Connecting dimensions between burners and heat generators
EN 22768-1:1993 General tolerances – Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
EN 22768-2:1993 General tolerances – Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
EN 2278:2014 Aerospace series – Steel X12CrNiMoV12-3 (1.4933) – 900 MPa ≤ Rm ≤ 1 100 MPa – Bars – De ≤ 150 mm
EN 2279:2018 Aerospace series – Steel FE-PM37 – 900 MPa ≤ Rm ≤ 1 100 MPa – Forgings – De ≤ 150 mm
EN 2280:2018 Aerospace series – Steel FE-PM37 – 900 MPa ≤ Rm ≤ 1 100 MPa – Sheet – a ≤ 6 mm
EN 2282:1992 Aerospace series – Characteristics of aircraft electrical supplies
EN 2283:2010 Aerospace series – Testing of aircraft wiring
EN 2284:1991 Aerospace series – Sulphuric acid anodizing of aluminium and wrought aluminium alloys
EN 22857:1989 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse
EN 2285:2017 Aerospace series – Bushes, plain, aluminium alloy, with self-lubricating liner – Dimensions and loads
EN 2286:2017 Aerospace series – Bushes, flanged aluminium alloy, with self-lubricating liner – Dimensions and loads
EN 22876:1992 Packaging – Complete, filled transport packages – Rolling test (ISO 2876:1985)
EN 2287:2017 Aerospace series – Bush, plain, in corrosion resisting steel with self-lubricating liner – Dimensions and loads
EN 2288:2019 Aerospace series – Bush, flanged, corrosion resisting steel, with self-lubricating liner – Dimensions and loads
EN 2289:1996 Aerospace series – Rod bodies in aluminium alloy for flight controls – Technical specification
EN 228:2012+A1:2017 Automotive fuels – Unleaded petrol – Requirements and test methods
EN 2290-1:1998 Aerospace series – Rod bodies, flight control in aluminium alloy, for adjustable end fittings – Part 1: Dimensions and loads
EN 23-1:1978 Packages for washing and cleaning powders – Dimensions and volumes of cartons and drums from fibre board
EN 2306:2017 Aerospace series – Heat resisting – Nickel base alloy Ni-Cr20Co3Fe3 – Annealed – Bars
EN 2309:1989 Aerospace series – Hole sizes for solid rivets
EN 2310:1991 Aerospace series – Test methods for the flame resistance rating of non-metallic materials
EN 2311:2017 Aerospace series – Bushes with self-lubricating liner – Technical specification
EN 2318:1992 Aerospace series – Aluminium alloy AL-P2024-T3511 – Extruded bars and sections 1,2 mm < or = a or D < or = 150 mm
EN 2319:2018 Aerospace series – Aluminium alloy 2024- – T3510 – Drawn bar – a ≤ 75 mm
EN 2320:2019 Aerospace series – Aluminium alloy 2024-T4 – Drawn bar – a ≤ 75 mm
EN 2321:2019 Aerospace series – Aluminium alloy 2024-T3 – Bars and sections – a ≤ 150 mm
EN 2326:1992 Aerospace series – Aluminium alloy AL-P6082-T6 – Extruded bars and sections a or D < or = 200 mm
EN 23270:1991 Paints and varnishes and their raw materials – Temperatures and humidities for conditioning and testing (ISO 3270:1984)
EN 2327:2006 Aerospace series – Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods – Dimensions
EN 2328:2006 Aerospace series – Washers, tab in corrosion resisting steel, cadmium plated for flight control rods – Dimensions
EN 2329:1993 Aerospace series – Textile glass fibre preimpregnates – Test method for the determination of mass per unit area
EN 232:2012 Baths – Connecting dimensions
EN 2330:1993 Aerospace series – Textile glass fibre preimpregnates – Test method for the determination of the content of volatile matter
EN 23312:1993 Sintered metal materials and hardmetals – Determination of Young modulus (ISO 3312:1987)
EN 2331:1993 Aerospace series – Textile glass fibre preimpregnates – Test methods for the determination of the resin and fibre content and mass of fibre per unit area
EN 2332:1993 Aerospace series – Textile glass fibre preimpregnates – Test method for the determination of the resin flow
EN 2334:1997 Aerospace series – Chromic-sulphuric acid pickle of aluminium and aluminium alloys
EN 2335:2005 Aerospace series – Bearings, spherical plain in corrosion resisting steel without assembly slot – Dimensions and loads
EN 2336:2005 Aerospace series – Bearings, spherical plain in steel with assembly slots – Dimensions and loads
EN 2337:2006 Aerospace series – Spherical plain bearings – Technical specification
EN 2338:2001 Aerospace series – Sheets, hot rolled in titanium and titanium alloys – Thickness 0,8 mm < = a < = 6 mm – Dimensions
EN 2339:2001 Aerospace series – Sheets, cold rolled in titanium and titanium alloys – Thickness 0,2 mm < = a < = 6 mm – Dimensions
EN 233:2016 Wallcoverings in roll form – Specification for finished wallpapers, wall vinyls and plastics wallcoverings
EN 2341:2018 Aerospace series – Aluminium and aluminium alloy – Square and rectangular extruded bars – Dimensions
EN 2344:2001 Aerospace series – Round bars, machined in heat resisting alloys – Diameter 10 mm < = D < = 180 mm – Dimensions
EN 2346-002:2006 Aerospace series – Cable, electrical, fire resistant – Operating temperatures between – 65 °C and 260 °C – Part 002: General
EN 2346-003:2006 Aerospace series – Cable, electrical, fire resistant – Operating temperatures between – 65 °C and 260 °C – Part 003: DL family, single core – Product standard
EN 2346-004:2006 Aerospace series – Cable, electrical, fire resistant – Operating temperatures between – 65
EN 2346-005:2017 Aerospace series – Cable, electrical, fire resistant – Operating temperatures between -65
EN 2348:1988 Aerospace series – Control cable assemblies – Technical specification
EN 2349-201:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 201: Visual inspection
EN 2349-202:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 202: Examination of dimensions and mass
EN 2349-301:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 301: Pick-up and drop-out voltage
EN 2349-302:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 302: Insulation resistance
EN 2349-303:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 303: Dielectric strength
EN 2349-304:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 304: Operate and release time
EN 2349-305:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 305: Bounce time
EN 2349-306:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 306: Overload d.c. and a.c.
EN 2349-307:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 307: Contact voltage drop
EN 2349-308:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 308: Coil current
EN 2349-309:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 309: Exported spikes
EN 2349-310:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 310: Rupture
EN 2349-312:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 312: Electrical service life – Mixed load
EN 2349-316:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 316: Mechanical life (Endurance at reduced load)
EN 2349-317:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 317: Service life of coil switching device
EN 2349-318:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature
EN 2349-319:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 319: Miss test
EN 2349-402:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 402: Corrosion, salt spray
EN 2349-405:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 405: Fluid resistance
EN 2349-407:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 407: Cold/low pressure and moist heat
EN 2349-409:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 409: Ozone resistance
EN 2349-410:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 410: Mould
EN 2349-411:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 411: Temperature change
EN 2349-412:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 412: Seal
EN 2349-413:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 413: Vibration, sinusoidal and random
EN 2349-414:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 414: Mechanical shock
EN 2349-415:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 415: Acceleration
EN 2349-601:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 601: Compass safety distance
EN 234:2019 Wallcoverings in roll form – Specification for wallcoverings for subsequent decoration
EN 2350:1990 Aerospace series – Circuit breakers – Technical specification
EN 2353:1988 Aerospace series – Turnbarrels, control cable in corrosion resisting steel – Dimensions and loads
EN 2354:1988 Aerospace series – Eye-ends, threaded, control cable in corrosion resisting steel – Dimensions and loads
EN 2355:1988 Aerospace series – Fork-ends, threaded, control cable in corrosion resisting steel – Dimensions and loads
EN 2356:1988 Aerospace series – Fork-ends threaded, control cable for rolling bearings in corrosion resisting steel – Dimensions and loads
EN 2357:1988 Aerospace series – Stud-ends in corrosion resisting steel swaged on type, control cable – Dimensions and loads
EN 2358:1988 Aerospace series – Eye-ends in corrosion resisting steel swaged on type, control cable – Dimensions and loads
EN 2359:1988 Aerospace series – Fork-ends in corrosion resisting steel swaged on type, control cable – Dimensions and loads
EN 235:2020 Wallcoverings – Vocabulary and symbols
EN 2360:1988 Aerospace series – Fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable – Dimensions and loads
EN 2361:1988 Aerospace series – Ball-ends, double shank in corrosion resisting steel swaged on type, control cable – Dimensions and loads
EN 2362:1988 Aerospace series – Ball-ends in corrosion resisting steel swaged on type, control cable – Dimensions and loads
EN 2363:1988 Aerospace series – Locking clips for turnbuckles of control cables – Dimensions
EN 2364:1989 Aerospace series – Pins, shear, headed, close tolerance
EN 2365:1989 Aerospace series – Collars, aluminium alloy
EN 2366:2019 Aerospace series – Sheets and strips – Heat resisting alloys – Cold rolled – Thickness a ≤ 3 mm – Dimensions
EN 2367:1989 Aerospace series – Split pins in steel EN 2573
EN 2369:2018 Aerospace series – Wires, heat resisting alloys – Diameter 0,2 mm ≤ D ≤ 8 mm – Dimensions
EN 2374:1991 Aerospace series – Glass fibre reinforced mouldings and sandwich composites – Production of test panels
EN 2375:1992 Aerospace series – Resin preimpregnated materials – Production batch sampling procedure
EN 2377:1989 Aerospace series – Glass fibre reinforced plastics – Test method – Determination of apparent interlaminar shear strength
EN 2378:1995 Aerospace series – Fibre reinforced plastics – Determination of water absorption by immmersion
EN 2379:2018 Aerospace series – Fluids for assessment of non-metallic materials
EN 237:2004 Liquid petroleum products – Petrol – Determination of low lead concentrations by atomic absorption spectrometry
EN 2381:1992 Aerospace series – Aluminium alloy AL-P7009-T7452 – Hand forgings 40 mm < or = a < or = 150 mm
EN 2384:1992 Aerospace series – Aluminium alloy AL-P2014A T6511 – Extruded bars and sections a or D < or = 150 mm
EN 2385:1992 Aerospace series – Aluminium alloy AL-P7009-T74511 – Extruded bars and sections a or D < or = 125 mm
EN 2387:2018 Aerospace series – Aluminium alloy 2014A- – T6 – Tubes for structures – 0,6 mm ≤ a ≤ 12,5 mm
EN 238:1996 Liquid petroleum products – Petrol – Determination of the benzene content by infrared spectrometry
EN 238:1996/A1:2003 Liquid petroleum products – Petrol – Determination of the benzene content by infrared spectrometry
EN 23909:1993 Hardmetals – Determination of cobalt – Potentiometric method (ISO 3909:1976)
EN 2390:2019 Aerospace series – Aluminium alloy 6082-T6 – Tubes for structures 0,6 mm ≤ a ≤ 12,5 mm
EN 23923-2:1993 Metallic powders – Determination of apparent density – Part 2: Scott volumeter method (ISO 3923-2:1981)
EN 2395:2005 Aerospace series – Aluminium alloy AL-P2014A-T4 or T42 – Sheet and strip – 0,4 mm <=”” td=””>
EN 2398:2008 Aerospace series – Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) – Rm ≥ 900 MPa – Bars for machined bolts – D ≤ 25 mm
EN 23995:1993 Metallic powders – Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985)
EN 2399:2008 Aerospace series – Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) – Rm ≥ 900 MPa – Bars for forged bolts – D ≤ 25 mm
EN 24003:1993 Permeable sintered metal materials – Determination of bubble test pore size (ISO 4003:1977)
EN 24006:1993 Measurement of fluid flow in closed conduits – Vocabulary and symbols (ISO 4006:1991)
EN 2400:2019 Aerospace series – Heat resisting nickel base alloy NI-P96-HT – Cold drawn and precipitation treated – Wire – D ≤ 10 mm
EN 24015:1991 Hexagon head bolts – Product grade B – Reduced shank (Shank diameter = pitch diameter) (ISO 4015:1979)
EN 2402:2014 Aerospace series – Heat resisting nickel base alloy NiCr20Co3Fe3 – Annealed – Wire – D ≤ 10 mm
EN 2413:1995 Aerospace series – Bolts, shouldered, thin hexagonal head, close tolerance shank, short
EN 2414:2019 Aerospace series – Washers, chamfered, with counterbore, in alloy steel, cadmium plated
EN 24159:1989 Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method (ISO 4159:1978, ed. 1)
EN 24159:1989/AC1:1989 Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method (ISO 4159:1978, ed. 1)
EN 24178:1992 Complete, filled transport packages – Distribution trials – Information to be recorded (ISO 4178:1980)
EN 24185:1993 Measurement of liquid flow in closed conduits – Weighing method (ISO 4185:1980)
EN 24185:1993/AC:1993 Measurement of liquid flow in closed conduits – Weighing method (ISO 4185:1980)
EN 241:2000 Liquid petroleum products – Determination of sodium content – Atomic absorption spectrometric method
EN 2422:2005 Aerospace series – Aluminium alloy AL-P2124-T351 – Plate – 25 mm <=”” td=””>
EN 2424:2008 Aerospace series – Marking of aerospace products
EN 2428:1995 Aerospace series – Ethylene-propylene rubber (EPM/EPDM) – Hardness 50 IRHD
EN 2429:1995 Aerospace series – Ethylene-propylene rubber (EPM/EPDM) – Hardness 60 IRHD
EN 2430:1995 Aerospace series – Ethylene-propylene rubber (EPM/EPDM) – Hardness 70 IRHD
EN 2431:1995 Aerospace series – Ethylene-propylene rubber (EPM/EPDM) – Hardness 80 IRHD
EN 2432:1995 Aerospace series – Ethylene-propylene rubber (EPM/EPDM) – Hardness 90 IRHD
EN 2434-001:2010 Aerospace series – Paints and varnishes – Two component cold curing polyurethane finish – Part 001: Basic requirements
EN 2434-002:2010 Aerospace series – Paints and varnishes – Two component cold curing polyurethane finish – Part 002: High chemical resistance
EN 2434-003:2010 Aerospace series – Paints and varnishes – Two component cold curing polyurethane finish – Part 003: Flexible and high fluid resistance for interior
EN 2434-004:2010 Aerospace series – Paints and varnishes – Two component cold curing polyurethane finish – Part 004: High flexibility
EN 2434-005:2006 Aerospace series – Paints and varnishes – Two component cold curing polyurethane finish – Part 005: High flexibility and chemical agent resistance for military application
EN 2435-001:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromated two component cold curing primer – Part 001: Minimum requirements
EN 2435-002:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromated two component cold curing primer – Part 002: High corrosion resistance
EN 2435-003:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromated two component cold curing primer – Part 003: High corrosion and fluid resistance
EN 2435-004:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromated two component
EN 2435-005:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromated two component cold curing primer – Part 005: High corrosion resistance for military application
EN 2436-001:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing primer – Part 001: Basic requirements
EN 2436-002:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing primer – Part 002: High corrosion resistance
EN 2436-003:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing primer – Part 003: High corrosion and fluid resistance
EN 2436-004:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two
EN 2436-005:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two
EN 2436-006:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two
EN 2437:2001 Aerospace series – Chromate conversion coatings (yellow) for aluminium and aluminium alloys
EN 2438:2008 Aerospace series – Steel FE-PL2102 (35NiCr6) – 900 MPa ≤ Rm ≤ 1 100 MPa – Bars – De ≤ 40 mm
EN 2439:2009 Aerospace series – Steel FE-PL2102 (34NiCr6) – 900 MPa ≤ Rm ≤ 1 100 MPa – Forgings – De ≤ 40 mm
EN 2446:2008 Aerospace series – Steel FE-PL1503 (35CrMo4) – 1 100 MPa ≤ Rm ≤ 1 300 MPa – Bars – De ≤ 25 mm
EN 2448:2008 Aerospace series – Steel FE-PL1503 (35CrMo4) – 900 MPa ≤ Rm ≤ 1 100 MPa – Bars – De ≤ 40 mm
EN 24491-1:1993 Metallic powders – Determination of oxygen content by reduction methods – Part 1: General guidelines (ISO 4491-1:1989)
EN 24501:1993 Hardmetals – Determination of titanium – Photometric peroxide method (ISO 4501:1978)
EN 24503:1993 Hardmetals – Determination of contents of metallic elements by X-ray fluorescence – Fusion method (ISO 4503:1978)
EN 2450:2018 Aerospace series – Steel 31Ni10 – 1 230 MPa ≤ Rm ≤ 1 420 MPa – Bars – De ≤ 40 mm
EN 2451:2019 Aerospace series – Steel 31Ni10 – 1 230 MPa ≤ Rm ≤ 1 420 MPa – Forgings – De ≤ 40 mm
EN 2460:2009 Aerospace series – Steel FE-PM1901 (X12Cr13) – 600 MPa ≤ Rm ≤ 800 MPa – Bars – De ≤ 70 mm
EN 2461:2009 Aerospace series – Steel FE-PM1901 (X12Cr13) – 600 MPa ≤ Rm ≤ 800 MPa – Forgings – De ≤ 70 mm
EN 2465:2019 Aerospace series – Steel X2CrNi18-9 (1.4307) – Softened – 450 MPa ≤ Rm ≤ 680 MPa – Bars for machining – 4 mm ≤ De ≤ 100 mm
EN 2466:2009 Aerospace series – Steel FE-PA3901 (X2CrNi19-11) – Softened – Forgings – De ≤ 100 mm
EN 2467:2007 Aerospace series – Steel FE-PA3901 (X2CrNi18-9) – Air melted – Softened – Plate, sheet and strip – 0,4 mm ≤ a ≤ 20 mm – 520 MPa ≤ Rm ≤ 670 MPa
EN 2468:2019 Aerospace series – Steel FE-PA11 – Softened – Tubes – 0,5 mm ≤ a ≤ 5 mm
EN 2469:2007 Aerospace series – Steel FE-PA3901 (X1CrNi18-10) – Air melted – Softened – Wires – 0,4 mm ≤ D ≤ 12,5 mm – 450 MPa ≤ Rm ≤ 650 MPa
EN 246:2003 Sanitary tapware – General specifications for flow rate regulators
EN 2470:2019 Aerospace series – Steel FE-PA11 – Softened and cold drawn – Wires for rivets – 1 mm ≤ D ≤ 10 mm
EN 2475:2018 Aerospace series – Steel 30CrNiMo8 (1.6580) – Air melted – Hardened and tempered – Bar for machining – De ≤ 100 mm – 1 100 MPa ≤ Rm ≤ 1 300 MPa
EN 2476:2019 Aerospace series – Steel 30CrNiMo8 (1.6580) – 1 100 MPa ≤ Rm ≤ 1 300 MPa – Forgings – De ≤ 100 mm
EN 2478:2008 Aerospace series – Steel FE-PL2107 (30NiCrMo16) – 1 220 MPa ≤ Rm ≤ 1 370 MPa – Bars – De ≤ 40 mm
EN 247:1997 Heat exchangers – Terminology
EN 2480:2008 Aerospace series – Steel FE-PL2108 (36NiCrMo16) – 1 250 MPa ≤ Rm ≤ 1 400 MPa – Bars – De ≤ 75 mm
EN 2481:2010 Aerospace series – Steel FE-PL2108 (36NiCrMo16) – 1 250 MPa ≤ Rm ≤ 1 400 MPa – Forgings – De ≤ 75 mm
EN 2482:2010 Aerospace series – Steel FE-PL2108 (36NiCrMo16) – 1 100 MPa ≤ Rm ≤ 1 300 MPa – Bars – De ≤ 100 mm
EN 2483:2010 Aerospace series – Steel FE-PL2108 (36NiCrMo16) – 1 100 MPa ≤ Rm ≤ 1 300 MPa – Forgings – De ≤ 100 mm
EN 2484:1989 Aerospace series – Microfilming of drawings – Aperture card for 35 mm microfilm
EN 2486:2005 Aerospace series – Aluminium alloy AL-P2618A – Forging stock
EN 24883:1993 Hardmetals – Determination of contents of metallic elements by X-ray fluorescence – Solution method (ISO 4883:1978)
EN 2489:1995 Aerospace series – Fibre reinforced plastics – Determination of the action of test fluids
EN 248:2002 Sanitary tapware – General specification for electrodeposited coatings of Ni-Cr
EN 2491:2011 Aerospace series – Molybdenum disulphide dry lubricants – Coating methods
EN 24935:1991 Steel and iron – Determination of sulphur content – Infrared absorption method after combustion in an induction furnace (ISO 4935:1989)
EN 24937:1990 Steel and iron – Determination of chromium content – Potentiometric or visual method (ISO 4937:1986)
EN 24937:1990/AC:1991 Steel and iron – Determination of chromium content – Potentiometric or visual method (ISO 4937:1986)
EN 24943:1990 Chemical analysis of ferrous metal – Determination of copper content – Flame atomic absorption spectrometric method (ISO 4943:1985)
EN 24943:1990/AC:1991 Steel and cast iron – Determination of copper content – Flame atomic absorption spectrometric method (ISO 4943:1985)
EN 2495:1990 Aerospace series – Single-pole circuit breakers temperature compensated rated currents up to 25 A – Product standard
EN 2497:1989 Aerospace series – Dry abrasive blasting of titanium and titanium alloys
EN 2498:1990 Aerospace series – Rod ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank – Dimensions and loads
EN 2499:1987 Aerospace series – Computer output microfiche (COM) – A6 microfiche
EN 249:2010 Sanitary appliances – Shower trays made from crosslinked cast acrylic sheets – Requirements and test methods
EN 2501:1988 Aerospace series – Bearings, spherical plain in corrosion resisting steel with selflubricating liner and wide inner ring – Dimensions and loads
EN 2501:1988/AC1:1988 Aerospace series – Bearings, spherical plain in corrosion resisting steel with selflubricating liner and wide inner ring – Dimensions and loads
EN 2502:2019 Aerospace series – Steel X5CrNoMoCuNb14-5 (1.4594) – 930 MPa ≤ Rm ≤ 1 080 MPa – Bars – De ≤ 150 mm
EN 2503:2019 Aerospace series – Steel X5CrNoMoCuNb14-5 (1.4594) – 930 MPa ≤ Rm ≤ 1 080 MPa – Forgings – De ≤ 150 mm
EN 250:2014 Respiratory equipment – Open-circuit self-contained compressed air diving apparatus – Requirements, testing and marking
EN 2510:2019 Aerospace series – Aluminium alloy 2024- – T42 – Drawn tubes for structural applications
EN 2511:2005 Aerospace series – Aluminium alloy AL-P7075-T7351 – Plate -6 mm <=”” td=””>
EN 2512:2014 Aerospace series – Aluminium alloy AL-P7175 – T7351 – Plate – 6mm < a ≤ 100 mm
EN 2515:1990 Aerospace series – Rod ends, adjustable single fork and threaded shank – Dimensions and loads
EN 2516:2020 Aerospace series – Passivation of corrosion resisting steels and decontamination of nickel base alloys
EN 25184:1994 Straight resistance spot welding electrodes (ISO 5184:1979)
EN 251:2012 Shower trays – Connecting dimensions
EN 252:2014 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact
EN 2535:2011 Aerospace series – Vacuum deposition of cadmium
EN 2536:1995 Aerospace series – Hard anodizing of aluminium alloys
EN 253:2019 District heating pipes – Bonded single pipe systems for directly buried hot water networks –
EN 2540:2018 Aerospace series – Steel X7CrNiAl17-7 (1.4568) – Air melted – Solution treated and precipitation hardened – Sheet and strip – a ≤ 6 mm – 1 240 MPa ≤ Rm ≤ 1 450 MPa
EN 2541:2018 Aerospace series – Steel FE-PA18 – Quenched and cold drawn – Wire for spring – D ≤ 4,0 mm
EN 2542:2008 Aerospace series – Steel FE-PL1502 (25CrMo4) – Annealed – Bar and wire – De ≤ 40 mm – For prevailing torque nuts
EN 2543:2009 Aerospace series – Steel FE-PL1502 (25CrMo4) – Annealed – Sheet and strip – 0,3 mm ≤ a ≤ 2 mm – For prevailing torque nuts
EN 2544:1987 Aerospace series – Representation of rivets on drawings for aerospace equipment
EN 2545-1:1995 Aerospace series – Titanium and titanium alloy remelting stock and castings – Technical specification – Part 1: General requirements
EN 2545-2:1995 Aerospace series – Titanium and titanium alloy remelting stock and castings – Technical specification – Part 2: Remelting stock
EN 2545-3:1995 Aerospace series – Titanium and titanium alloy remelting stock and castings – Technical specification – Part 3: Pre-production and production castings
EN 2546:2006 Aerospace series – Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods – Dimensions
EN 2547:1987 Aerospace series – Filming of documents – Microfilm 105 mm (microfiche A6)
EN 2549:2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short
EN 2550:1992 Aerospace series – Rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series
EN 2551:1992 Aerospace series – Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series
EN 2552:1992 Aerospace series – Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series
EN 2553:1992 Aerospace series – Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series
EN 2555:1992 Aerospace series – Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series
EN 2556:1992 Aerospace series – Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series
EN 2557:1997 Aerospace series – Carbon fibre preimpregnates – Determination of mass per unit area
EN 25580:1992 Non-destructive testing – Industrial radiographic illuminators – Minimum requirements (ISO 5580:1985)
EN 2558:1997 Aerospace series – Carbon fibre preimpregnates – Determination of the volatile content
EN 2559:1997 Aerospace series – Carbon fibre preimpregnates – Determination of the resin and fibre content and the mass of fibre per unit area
EN 2560:1998 Aerospace series – Carbon fibre preimpregnates – Determination of the resin flow
EN 2561:1995 Aerospace series – Carbon fibre reinforced plastics – Unidirectional laminates – Tensile test parallel to the fibre direction
EN 2562:1997 Aerospace series – Carbon fibre reinforced plastics – Unidirectional laminates – Flexural test parallel to the fibre direction
EN 2563:1997 Aerospace series – Carbone fibre reinforced plastics – Unidirectional laminates – Determination of the apparent interlaminar shear strength
EN 2564:2018 Aerospace series – Carbon fibre laminates – Determination of the fibre, resin and void contents
EN 2565:2013 Aerospace series – Preparation of carbon fibre reinforced resin panels for test purposes
EN 25663:1993 Water quality – Determination of Kjeldahl nitrogen – Method after mineralization with selenium (ISO 5663:1984)
EN 2566:2019 Aerospace series – Fluorocarbon rubber (FKM) – Hardness 70 IRHD
EN 2567:2019 Aerospace series – Fluorocarbon rubber (FKM) – Hardness 80 IRHD
EN 2568:2019 Aerospace series – Fluorocarbon rubber (FKM) – Hardness 90 IRHD
EN 2569:1991 Aerospace series – Control cable fittings and turnbarrels – Technical specification
EN 2570:1996 Aerospace series – Nickel-cadmium batteries – Technical specification
EN 2573:2007 Aerospace series – Steel FE-PA3601 (X6CrNiTi18-10) – Softened – Rm ≤ 780 MPa – Wire – 0,25 mm ≤ De ≤ 3 mm
EN 2574:1990 Aerospace series – Welds – Information on drawings
EN 2575:1989 Aerospace series – Filming of documents – 16 mm microfilm
EN 2576:2020 Aerospace series – Bolts, MJ threads, in heat resisting steel FE-PA2601 (A286) – Classification: 900 MPa (at ambient temperature)/650 °C – Technical specification
EN 257:2010 Mechanical thermostats for gas-burning appliances
EN 25813:1992 Water quality – Determination of dissolved oxygen – Iodometric method (ISO 5813:1983)
EN 25822:1991 Spot welding equipment – Taper plug gauges and taper ring gauges (ISO 5822:1988)
EN 25827:1992 Spot welding – Electrode back-ups and clamps (ISO 5827:1983)
EN 2583:2019 Aerospace series – Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601
EN 2584:2019 Aerospace series – Bearings, spherical plain in corrosion resisting steel with selflubricating liner – Narrow series – Elevated load at ambient temperature – Dimensions and
EN 2585:2019 Aerospace series – Bearing, spherical plain in corrosion resisting steel with self-lubricating liner – Wide series – Elevated load at ambient temperature – Dimensions and loads
EN 2586:1991 Aerospace series – Washers, lock for flight control rods – Dimensions
EN 2587:1990 Aerospace series – Rod ends adjustable double fork and threaded shank – Dimensions and loads
EN 2588:2006 Aerospace series – Bearings, spherical plain in corrosion resisting steel with assembly slots – Dimensions and loads
EN 2589:2017 Aerospace series – Steel – Sheet and strip, cold rolled – Thickness 0,1 mm ≤ a ≤ 3 mm – Dimensions
EN 259-1:2001 Wallcoverings in roll form – Heavy duty wallcoverings – Part 1: Specifications
EN 259-2:2001 Wallcoverings in roll form – Heavy duty wallcoverings – Part 2: Determination of impact resistance
EN 2590:2017 Aerospace series – Steel – Sheets and plates, hot rolled – Dimensions
EN 2591-100:2018 Aerospace series – Elements of electrical and optical connection – Test methods – Part 100: General
EN 2591-101:1994 Aerospace series – Elements of electrical and optical connection – Test methods – Part 101: Visual examination
EN 2591-102:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 102: Examination of dimensions and mass
EN 2591-201:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 201: Contact resistance – Low level
EN 2591-202:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 202: Contact resistance at rated current
EN 2591-203:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 203: Electrical continuity at microvolt level
EN 2591-204:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 204: Discontinuity of contacts in the microsecond range
EN 2591-205:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 205: Housing (shell) electrical continuity
EN 2591-206:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 206: Measurement of insulation resistance
EN 2591-207:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 207: Voltage proof test
EN 2591-208:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 208: Temperature rise due to rated current
EN 2591-209:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 209: Current temperature derating
EN 2591-210:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 210: Electrical overload
EN 2591-211:2002 Aerospaces series – Elements of electrical and optical connection – Test Methods – Part 211: Capacitance
EN 2591-212:2005 Aerospace series – Elements of electrical and optical connection – Test methods – Part 212: Surface transfer impedance
EN 2591-213:1997 Aeropsace series – Elements of electrical and optical connection – Test methods – Part 213: Shielding effectiveness from 100 MHz to 1 GHz
EN 2591-214:2012 Aerospace series – Elements of electrical and optical connection – Test methods – Part 214: Lightning strike, current and voltage pulse
EN 2591-216:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 216: Engagement depth of contacts
EN 2591-217:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 217: Voltage drop under specified current for terminal lugs and in-line splices
EN 2591-218:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling
EN 2591-219:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 219: Voltage strength for insulated terminal lugs and in-line splices
EN 2591-220:2005 Aerospace series – Elements of electrical and optical connection – Test methods – Part 220: Contact/conductor joint ageing by current and temperature cycling
EN 2591-221:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 221: Voltage Standing Wave Ratio (VSWR)
EN 2591-222:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 222: Insertion Loss (I.L.)
EN 2591-223:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 223: Measurement of characteristic impedance of a coaxial connector or contact
EN 2591-224:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 224: RF leakage
EN 2591-225:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 225: RF high potential withstanding voltage
EN 2591-226:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 226: Corona level
EN 2591-227:2015 Aerospace series – Elements of electrical and optical connection – Test methods – Part 227: Partial discharges test
EN 2591-228:2018 Aerospace series – Elements of electrical and optical connection – Test methods – Part 228: Ferrule withdrawal force
EN 2591-301:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 301: Endurance at temperature
EN 2591-302:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 302: Climatic sequence
EN 2591-303:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 303: Cold/low pressure and damp heat
EN 2591-304:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 304: Damp heat steady state
EN 2591-305:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 305: Rapid change of temperature
EN 2591-306:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 306: Mould growth
EN 2591-307:2012 Aerospace series – Elements of electrical and optical connection – Test methods – Part 307: Salt mist
EN 2591-308:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 308: Sand and dust
EN 2591-309:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 309: Dry heat
EN 2591-310:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 310: Cold
EN 2591-311:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 311: Low air pressure
EN 2591-312:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 312: Air leakage
EN 2591-313:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 313: Artificial rain
EN 2591-314:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 314: Immersion at low air pressure
EN 2591-315:2015 Aerospace series – Elements of electrical and optical connection – Test methods – Part 315: Fluid resistance
EN 2591-316:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 316: Ozone resistance
EN 2591-317:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 317: Flammability
EN 2591-318:2018 Aerospace series – Elements of electrical and optical connection – Test methods – Part 318: Fire-resistance
EN 2591-319:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 319: Gastightness of solderless wrapped connections
EN 2591-320:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 320: Simulated solar radiation at ground level
EN 2591-321:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 321: Damp heat, cyclic test
EN 2591-322:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 322: Hermeticity
EN 2591-323:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 323: Thermal shock
EN 2591-324:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 324: Interfacial sealing
EN 2591-325:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 325: Ice resistance
EN 2591-326:2018 Aerospace series – Elements of electrical and optical connection – Test methods – Part 326: Fire immersion test
EN 2591-401:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 401: Acceleration, steady state
EN 2591-402:2012 Aerospace series – Elements of electrical and optical connection – Test methods – Part 402: Shock
EN 2591-403:2018 Aerospace series – Elements of electrical and optical connection – Test methods – Part 403: Sinusoidal and random vibration
EN 2591-404:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 404: Transverse load
EN 2591-405:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 405: Axial load
EN 2591-406:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 406: Mechanical endurance
EN 2591-407:1999 Aerospace series – Elements of electrical and optical connection – Test methods – Part 407: Durability of contact retention system and seals
EN 2591-408:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 408: Mating and unmating forces
EN 2591-409:1999 Aerospace series – Elements of electrical and optical connection – Test methods – Part 409: Contact retention in insert
EN 2591-410:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 410: Insert retention in housing (axial)
EN 2591-411:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 411: Insert retention in housing (torsional)
EN 2591-412:1999 Aerospace series – Elements of electrical and optical connection – Test methods – Part 412: Contact insertion and extraction forces
EN 2591-413:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 413: Holding force of grounding spring system
EN 2591-414:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 414: Unmating of lanyard release connectors
EN 2591-415:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 415: Test probe damage (female contacts)
EN 2591-416:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 416: Contact bending strength
EN 2591-417:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 417: Tensile strength (crimped connection)
EN 2591-418:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 418: Gauge insertion/extraction forces (female contacts)
EN 2591-419:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 419: Stability of male contacts in insert
EN 2591-420:2006 Aerospace series – Elements of electrical and optical connection – Test methods – Part 420: Mechanical strength of rear accessories
EN 2591-421:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 421: Free fall
EN 2591-422:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 422: Locking wire hole strength
EN 2591-423:2005 Aerospace series – Elements of electrical and optical connection – Test methods – Part 423: Connector rear accessories thread strength
EN 2591-424:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 424: Stripping force, solderless wrapped connections
EN 2591-425:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 425: Unwrapping capability, solderless wrapped connections
EN 2591-426:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 426: Contact retention system effectiveness
EN 2591-427:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 427: Robustness of protective cover attachment
EN 2591-428:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs
EN 2591-501:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 501: Soft solderability
EN 2591-502:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 502: Restricted entry
EN 2591-503:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 503: Contact deformation after crimping
EN 2591-505:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 505: Contact protection effectiveness (scoop-proof)
EN 2591-506:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 506: Use of tools
EN 2591-507:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 507: Plating porosity
EN 2591-508:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 508: Measurement of thickness of coating on contacts
EN 2591-509:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 509: Adhesion of coating on contacts
EN 2591-512:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell
EN 2591-513:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 513: Magnetic permeability
EN 2591-514:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 514: Solderability of contacts with self-contained solder and flux
EN 2591-515:2005 Aerospace series – Elements of electrical and optical connection – Test methods – Part 515: Hydrolytic stability
EN 2591-601:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 601: Optical elements – Insertion loss
EN 2591-602:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 602: Optical elements – Variation of attenuation and optical discontinuity
EN 2591-603:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 603: Optical elements – Change of power distribution
EN 2591-604:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 604: Optical elements – Cleaning capability of optical face
EN 2591-605:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 605: Optical elements – Return loss
EN 2591-606:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 606: Optical elements – Crosstalk
EN 2591-607:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 607: Optical elements – Immunity to ambient light coupling
EN 2591-609:2005 Aerospace series – Elements of electrical and optical connection – Test methods – Part 609: Optical elements – Effectiveness of cable attachment – Cable cyclic flexing
EN 2591-6101:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6101: Optical elements – Visual examination
EN 2591-610:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 610: Optical elements – Effectiveness of cable attachment – Cable pulling
EN 2591-611:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 611: Optical elements – Effectiveness of cable attachment – Cable torsion
EN 2591-612:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 612: Optical elements – Effectiveness of cable attachment – Cable axial compression
EN 2591-613:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 613: Optical elements – Impact test
EN 2591-614:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 614: Optical elements – Connector radial compression
EN 2591-615:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 615: Optical elements – Connection integrity at temperature
EN 2591-617:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 617: Optical elements – Temperature cycling
EN 2591-6301:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6301: Optical elements – Endurance at temperature
EN 2591-6303:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6303: Optical elements – Cold/low pressure and damp heat
EN 2591-6305:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6305: Optical elements – Rapid change of temperature
EN 2591-6306:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6306: Optical elements – Mould growth
EN 2591-6307:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6307: Optical elements – Salt mist
EN 2591-6314:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6314: Optical elements – Immersion at low air pressure
EN 2591-6315:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6315: Optical elements – Fluid resistance
EN 2591-6316:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6316: Optical elements – Ozone resistance
EN 2591-6317:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6317: Optical elements – Flammability
EN 2591-6318:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6318: Optical elements – Fire resistance
EN 2591-6321:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6321: Optical elements – Damp heat, cyclic test
EN 2591-6323:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6323: Optical elements – Thermal shock (Hermetically sealed devices)
EN 2591-6324:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6324: Optical elements – Interfacial sealing
EN 2591-6401:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6401: Optical elements – Acceleration steady state
EN 2591-6402:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6402: Optical elements – Shock
EN 2591-6403:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6403: Optical elements – Vibrations
EN 2591-6404:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6404: Optical elements – Transverse load
EN 2591-6405:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6405: Optical elements – Axial load
EN 2591-6406:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6406: Optical elements – Mechanical endurance
EN 2591-6414:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6414: Optical elements – Unmating of lanyard release optical connection elements
EN 2591-6415:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6415: Optical elements – Test probe damage
EN 2591-701:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 701: Electrical elements – Measurement of open circuit impedance of couplers
EN 2591-702:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 702: Electrical elements – Measurement of signal distortion of couplers
EN 2591-703:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 703: Electrical elements – Common mode rejection of couplers
EN 2591-704:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 704: Electrical elements – Measurement of turns ratio on a transformer used in a coupler
EN 2591-705:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 705: Electrical elements – Measurement of stub input impedance of couplers
EN 2591-706:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 706: Electrical elements – Transmission test
EN 2591-707:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part
EN 2591-708:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 708: Electrical elements – Measurement of surface transfer impedance of couplers
EN 2591-709:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 709: Electrical elements – Tensile strength of couplers
EN 2591-7301:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 7301: Electrical elements – Temperature endurance of couplers
EN 2591:1992 Aerospace series – Elements of electrical and optical connection – Test methods – General
EN 2592:1990 Aerospace series – Three-pole circuit breakers temperature compensated rated currents up to 25 A – Product standard
EN 2593-001:2014 Aerospace series – Bases for 10 A electromagnetic plug-in relays, two and four poles double thrown – Part 001: Technical specification
EN 25967:1989 Taps and thread cutting – Nomenclature of the main types and terminology (ISO 5967:1981)
EN 25968:1989 Circular screwing dies – Terminology (ISO 5968:1981)
EN 2596:2006 Aerospace series – Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods – Dimensions
EN 25978:1993 Rubber- or plastics-coated fabrics – Determination of blocking resistance (ISO 5978:1990)
EN 2597:1998 Aerospace series – Carbon fibre reinforced plastics – Unidirectional laminates – Tensile test perpendicular to the fibre direction
EN 2599:2001 Aerospace series – Strips in aluminium and aluminium alloys – Thickness 0,25 mm < a < 3,2 mm – Dimensions
EN 2600:2018 Aerospace series – Designation of metallic semi-finished products – Rules
EN 2601:1996 Aerospace series – Fork ends, adjustable – Technical specification
EN 2602:2005 Aerospace series – Ports for adaptors, threaded, with lockring – Geometric configuration
EN 2603:2005 Aerospace series – Port ends for adaptors, threaded, with lockring – Geometric configuration
EN 2604:2005 Aerospace series – 8° 30′ interface for adaptors, threaded, with lockring – Geometric configuration
EN 2605:2005 Aerospace series – 24° interface for adaptors, threaded, with lockring – Geometric configuration
EN 2606:2009 Aerospace series – 60° interface for adaptors, threaded, with lockring – Geometric configuration
EN 2607:2005 Aerospace series – O-rings for adaptors, threaded, with lockring – Survey
EN 2608:2005 Aerospace series – Installation and removal requirements for 8° 30′ adaptors, threaded, with lockring
EN 2609:1988 Aerospace series – Turnbarrels, control cable in copper-zinc alloys – Dimensions and loads
EN 26157-1:1991 Fasteners – Surface discontinuities – Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
EN 26157-3:1991 Fasteners – Surface discontinuities – Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
EN 2617:2001 Aerospace series – Plates in titanium and titanium alloys – Thickness 6 mm < = a < = 100 mm – Dimensions
EN 2622:2001 Aerospace series – Circular tubes, for fluids in heat resisting alloys-Diameter 3,2 mm < = D < = 100 mm – Dimensions
EN 2624:2007 Aerospace series – Pressure impulse testing of hydraulic system components
EN 2630:1993 Aerospace series – Aluminium alloy AL-P7009-T74511 – Extruded bars and sections a or D <= 125 mm with peripheral coarse grain control
EN 2632:2005 Aerospace series – Aluminium alloy AL-P7075 – T73511 – Extruded bar and section – a or D <=”” td=””>
EN 2633:2015 Aerospace series – Aluminium alloy AL-P2024 – AlCu4Mg1 – T3511 – Extruded bars and sections – 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control
EN 26352:1991 Ferronickel – Determination of nickel content – Dimenthylglyoxime gravimetric method (ISO 6352:1985)
EN 2635:2005 Aerospace series – Aluminium alloy AL-P2014A – T6511 – Extruded bar and section – a or D <=”” td=””>
EN 2636:1993 Aerospace series – Aluminium alloy AL-P6082-T6 – Extruded bars and sections a or D <= 200 mm with peripheral coarse grain control
EN 2638:2019 Aerospace series – Aluminium alloy 2024- – T3 – Extruded bar and section – 1,2 mm ≤ (a or D) ≤ 150 mm with coarse peripheral grain control
EN 263:2008 Sanitary appliances – Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
EN 2641:1988 Aerospace series – Control cable assemblies – Combinations and dimensions
EN 2644:1998 Aerospace series – Rod assemblies for flight controls – Technical specification
EN 2645:2005 Aerospace series – Lockrings for adaptors, threaded, with lockring – Dimensions
EN 26461-1:1993 Water quality – Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) – Part 1: Method by enrichment in a liquid medium (ISO 6461-1:1986)
EN 26461-2:1993 Water quality – Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) – Part 2: Method by membrane filtration (ISO 6461-2:1986)
EN 2647:2006 Aerospace series – Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated – Classification: 900 MPa (at ambient temperature)/235 °C
EN 2648:2013 Aerospace series – Washers, concave, in alloy steel, cadmium plated
EN 2649:1995 Aerospace series – Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature) / 235 °C
EN 2650:1996 Aerospace series – Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C
EN 2651:1996 Aerospace series – Screws, pan head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C
EN 2652:1997 Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235°C
EN 2653:1996 Aerospace series – Screws, 100° countersunk normal head, threaded to head, in
EN 2654:1996 Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C
EN 2656:2001 Aerospace series – Pipe coupling – Coupling end, welded – Geometric configuration
EN 26590-1:1992 Packaging – Sacks – Vocabulary and types – Part 1: Paper sacks (ISO 6590-1:1983)
EN 26590-2:1992 Packaging – Sacks – Vocabulary and types – Part 2: Sacks made from thermoplastic flexible film (ISO 6590-2:1986)
EN 26591-1:1992 Packaging – Sacks – Description and method of measurement – Part 1: Empty paper sacks (ISO 6591-1:1984)
EN 26591-2:1992 Packaging – Sacks – Description and method of measurement – Part 2: Empty sacks made from thermoplastic flexible film (ISO 6591-2:1985)
EN 26599-1:1992 Packaging – Sacks – Conditioning for testing – Part 1: Paper sacks (ISO 6599-1:1983)
EN 2665-001:2013 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A – Part 001: Technical specification
EN 2665-003:1999 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A – Part 003: Metric thread terminals – Product standard
EN 2665-004:2013 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A – Part 004: UNC thread terminals – Product standard
EN 2667-2:2018 Aerospace series – Non-metallic materials – Foaming structural adhesives – Test methods – Part 2: Compressive tube shear
EN 2667-3:2019 Aerospace series – Non-metallic materials – Foaming structural adhesive films – Test methods – Part 3: Expansion ratio and volatile content
EN 2667-6:2001 Aerospace series – Non-metallic materials – Foaming structural adhesives – Test methods – Part 6: Determination of water absorption
EN 266:2020 Wall coverings in roll form – Specification for textile wall coverings
EN 26704:1991 Automatic steam traps – Classification (ISO 6704:1982)
EN 26777:1993 Water quality – Determination of nitrite – Molecular absorption spectrometric method (ISO 6777:1984)
EN 267:2020 Forced draught burners for liquid fuels
EN 26801:1993 Rubber or plastics hoses – Determination of volumetric expansion (ISO 6801:1983)
EN 26801:1993/A1:2011 Rubber or plastics hoses – Determination of volumetric expansion – Amendment 1: Deletion of alcohol as pressurizing fluid (ISO 6801:1983/Amd 1:2011)
EN 2680:2006 Aerospace series – Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel,
EN 2681:2004 Aerospace series – Aluminium alloy AL-P7010- – T74 – Hand and die forgings – a
EN 2684:2004 Aerospace series – Aluminium alloy AL-P7010- – T7651 – Plate – 6 mm < a
EN 2687:2004 Aerospace series – Aluminium alloy AL-P7010- – T7451 – Plate – 6 mm < a
EN 26891:1991 Timber structures – Joints made with mechanical fasteners – General principles for the determination of strength and deformation characteristics (ISO 6891:1983)
EN 2693:2005 Aerospace series – Aluminium alloy AL-P5086-H111 – Sheet and strip – 0,3 mm <=”” td=””>
EN 26948:1991 Automatic steam traps – Production and performance characteristic tests (ISO 6948:1981)
EN 2694:2005 Aerospace series – Aluminium alloy AL-P6061-T6 or T62 – Sheet and strip – 0,4 mm <=”” td=””>
EN 2695:2005 Aerospace series – Aluminium alloy AL-P6081-T6 – Sheet and strip – 0,3 mm <=”” td=””>
EN 2696:2005 Aerospace series – Aluminium alloy AL-P7075-T6 or T62 – Sheet and strip – 0,4 mm <=”” td=””>
EN 2699:2019 Aerospace series – Aluminium alloy (5086) – Annealed and straightened (H111) – Drawn bar – 6 mm ≤ D ≤ 50 mm
EN 269:1994 Respiratory protective devices – Powered fresh air hose breathing apparatus incorporating a hood – Requirements, testing, marking
EN 26:2015 Gas-fired instantaneous water heaters for the production of domestic hot water
EN 27023:1992 Packaging – Sacks – Method of sampling empty sacks for testing (ISO 7023:1983)
EN 2702:2005 Aerospace series – Aluminium alloy AL-P6061 – T6 or T62 – Drawn or extruded bar and section – a or D <=”” td=””>
EN 2703:2005 Aerospace series – Aluminium alloy AL-P2024-T4 or T42 – Clad sheet and strip – 0,3 mm <=”” td=””>
EN 2704:2015 Aerospace series – Aluminium alloy AL-P2024 – AlCu4Mg1 – T3511 – Drawn bars – De ≤ 75 mm
EN 2709:2018 Aerospace series – Aluminium alloy 2024- – T3510 – Bars and sections – 1,2 mm ≤ (a or D) ≤ 150 mm – With peripheral coarse grain control
EN 2713-002:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 002: Screened and jacketed – General
EN 2713-003:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2713-004:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2713-005:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2713-006:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2713-007:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2713-008:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2713-009:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2713-010:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2713-011:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2713-012:2017 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-002:2016 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 002: Screened and jacketed – General
EN 2714-003:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-004:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-005:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-006:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-007:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-008:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-009:2007 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-010:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-011:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-012:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-013:2017 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2714-014:2016 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating
EN 2715:2018 Aerospace series – Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings
EN 2716:2018 Aerospace series – Test method – Determination of susceptibility to intergranular corrosion
EN 27201-1:1994 Fire protection – Fire extinguishing media – Halogenated hydrocarbons – Part 1: Specifications for halon 1211 and halon 1301 (ISO 7201-1:1989)
EN 27201-2:1994 Fire protection – Fire extinguishing media – Halogenated hydrocarbons – Part 2: Code of practice for safe handling and transfer procedures (ISO 7201-2:1991)
EN 27213:1993 Pulps – Sampling for testing (ISO 7213:1981)
EN 2726:2018 Aerospace series – Aluminium alloy Al-C42201 – T6 – Sand castings – a ≤ 20 mm
EN 2728:2018 Aerospace series – Aluminium alloy AL-C42101 – T6 – Sand casting – a ≤ 20 mm
EN 2731:2005 Aerospace series – Magnesium alloy MG-C46001 – T6 – Sand casting
EN 2732:2005 Aerospace series – Magnesium alloy MG-C46001-T6 – Chill casting
EN 274-1:2002 Waste fittings for sanitary appliances – Part 1: Requirements
EN 274-2:2002 Waste fittings for sanitary appliances – Part 2: Test methods
EN 274-3:2002 Waste fittings for sanitary appliances – Part 3: Quality control
EN 27434:1992 Slotted set screws with cone point (ISO 7434:1983)
EN 27435:1992 Slotted set screws with long dog point (ISO 7435:1983)
EN 27436:1992 Slotted set screws with cup point (ISO 7436:1983)
EN 2743:2001 Aerospace series – Fibre reinforced plastics – Standard procedures for conditioning prior to testing unaged materials
EN 2744:1992 Aerospace series – Non metallic materials – Preferred test temperatures
EN 2746:1998 Aerospace series – Glass fibre reinforced plastics – Flexural test – Three point bend method
EN 2747:1998 Aerospace series – Glass fibre reinforced plastics – Tensile test
EN 27520:1991 Ferronickel – Determination of cobalt content – Flame atomic absorption spectrometric method (ISO 7520:1985)
EN 27527:1991 Nickel, ferronickel and nickel alloys – Determination of sulphur content – Iodometric titration method after induction furnace combustion (ISO 7527:1985)
EN 2752:1989 Aerospace series – Nuts, anchor, self locking fixed, two lug, reduced series, with counterbore – Classification : 1100 MPa/235 degree C
EN 2753:1996 Aerospace series – Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy
EN 2754:2006 Aerospace series – Nuts, anchor, self locking, two lug, floating with counterbore – Classification: 1 100 MPa/235 °C
EN 2755:2009 Aerospace series – Bearings, spherical plain in corrosion resisting steel with selflubricating liner – Elevated load at ambient temperature – Technical specification
EN 2756:2010 Aerospace series – Lamps, incandescent – Test methods
EN 27574-1:1988 Acoustics – Statistical methods for determining and verifying stated noise emission values
EN 27574-2:1988 Acoustics – Statistical methods for determining and verifying stated noise emission values
EN 27574-3:1988 Acoustics – Statistical methods for determining and verifying stated noise emission values
EN 27574-4:1988 Acoustics – Statistical methods for determining and verifying stated noise emission values
EN 2757:2011 Aerospace series – Structural adhesives system – Test method – Determination of the drying and ignition residues of primers
EN 275:1992 Wood preservatives – Determination of the protective effectiveness against marine borers
EN 27627-1:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 1: General requirements (ISO 7627-1:1983)
EN 27627-2:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 2:
EN 27627-3:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 3:
EN 27627-4:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 4:
EN 27627-5:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 5:
EN 27627-6:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m) (ISO 7627-6:1985)
EN 27721:1991 Countersunk head screws – Head configuration and gauging (ISO 7721:1983)
EN 27740:1992 Instruments for surgery, scalpels with detachable blades, fitting dimensions (ISO 7740:1985)
EN 27740:1992/A1:1997 Instruments for surgery, scalpels with detachable blades, fitting dimensions (ISO 7740:1985)
EN 27740:1992/AC:1996 Instruments for surgery, scalpels with detachable blades, fitting dimensions (ISO 7740:1985)
EN 277:1995 Sacks for the transport of food aid – Sacks made of woven polypropylene fabric
EN 2781:1998 Aerospace series – Non-metallic materials – Structural adhesives – Test methods – Determination of the primer thickness
EN 27841:1991 Automatic steam traps – Determination of steam loss – Test methods (ISO 7841:1988)
EN 27842:1991 Automatic steam traps – Determination of discharge capacity – Test methods (ISO 7842:1988)
EN 2786:2008 Aerospace series – Electrolytic silver plating of fasteners
EN 27888:1993 Water quality – Determination of electrical conductivity (ISO 7888:1985)
EN 2790:1991 Aerospace series – Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1,5 x thread diameter – Dimensions and loads
EN 2791:1991 Aerospace series – Rod ends, adjustable, single fork and threaded shank with engagement: 1,5 x thread diameter – Dimensions and loads
EN 2792:1991 Aerospace series – Rod ends, adjustable, double fork and threaded shank with engagement: 1,5 x thread diameter – Dimensions and loads
EN 27931:1992 Insulation caps and bushes for resistance welding equipment (ISO 7931:1985)
EN 2794-001:2014 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A – Part 001: Technical specification
EN 2794-003:1999 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A – Part 003: Metric thread terminals – Product standard
EN 2794-004:2014 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A – Part 004: UNC thread terminals – Product standard
EN 27941:1993 Commercial propane and butane – Analysis by gas chromatography (ISO 7941:1988)
EN 2795:2018 Aerospace series – Fluorocarbon rubber (FKM) – Low compressions set – Hardness 50 IRHD
EN 27965-1:1992 Packaging – Sacks – Drop test – Part 1: Paper sacks (ISO 7965-1:1984)
EN 2796:2018 Aerospace series – Fluorocarbon rubber (FKM) – Low compressions set – Hardness 60 IRHD
EN 2798:2019 Aerospace series – Fluorocarbon rubber (FKM) – Low compressions set – Hardness 80 IRHD
EN 2799:2018 Aerospace series – Fluorocarbon rubber (FKM) – Low compressions set – Hardness 90 IRHD
EN 2802:2005 Aerospace series – Aluminium alloy AL-P7475-T761 – Sheet and strip – 0,6 mm <=”” td=””>
EN 2803:2005 Aerospace series – Aluminium alloy AL-P7475-T761 – Clad sheet and strip – 1,0 mm <=”” td=””>
EN 28050:1992 Ferronickel ingots or pieces – Sampling for analysis (ISO 8050:1988)
EN 2808:1997 Aerospace series – Anodizing of titanium and titanium alloys
EN 2809:2001 Aerospace series – Nuts, hexagon, slotted / castellated, reduced height, normal across
EN 280:2013+A1:2015 Mobile elevating work platforms – Design calculations – Stability criteria – Construction – Safety – Examinations and tests
EN 2810:2001 Aerospace series – Nuts, hexagon, slotted / castellated, reduced height, normal across
EN 2811:2016 Aerospace series – Nuts, hexagon, slotted/ castellated in steel cadmium plated – Classification: 1 100 MPa/235 °C
EN 2812:2019 Aerospace series – Stripping of electric cables
EN 2813:2018 Aerospace series – Aluminium alloy AL-P-6061- – T6 – Drawn tube for pressure applications – 0,6 mm ≤ a ≤ 12,5 mm
EN 2815:2009 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted –
EN 28167:1992 Projections for resistance welding (8167:1989)
EN 2816:2019 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted – Solution treated and precipitation treated – Forgings – a or D ≤ 200 mm – Rm ≥ 965 MPa
EN 2817:2009 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted –
EN 2818:2009 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted – Solution treated and precipitation treated – Forgings – a or D ≤ 200 mm – Rm ≥ 1 070 MPa
EN 28206:1992 Acceptance tests for oxygen cutting machines – Reproducible accuracy – Operational characteristics (ISO 8206:1991)
EN 2821:2007 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted –
EN 28233:1990 Thermoplastics valves – Torque – Test method (ISO 8233:1988)
EN 2823:2017 Aerospace series – Fibre reinforced plastics – Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics
EN 2824:2011 Aerospace series – Burning behaviour of non-metallic materials under the influence of
EN 2825:2011 Aerospace series – Burning behaviour of non metallic materials under the influence of radiating heat and flames – Determination of smoke density
EN 2826:2011 Aerospace series – Burning behaviour of non metallic materials under the influence of radiating heat and flames – Determination of gas components in the smoke
EN 2828:1993 Aerospace series – Adhesion test for metallic coatings by burnishing
EN 2829:1994 Aerospace series – Adhesion test for metallic coatings by shot peening
EN 2830:1993 Aerospace series – Adhesion test for metallic coatings by shearing action
EN 2831:1993 Aerospace series – Hydrogen embrittlement of steels – Test by slow bending
EN 2832:1993 Aerospace series – Hydrogen embrittlement of steels – Notched specimen test
EN 2833-005:2013 Aerospace series – Glass fibre thermosetting preimpregnates – Technical specification – Part 005: Glass fabric/phenolic resin preimpregnate
EN 28343:1991 Ferronickel – Determination of silicon content – Gravimetric method (ISO 8343:1985)
EN 2835:2012 Aerospace series – Chloroprene rubber (CR) – Heat resistance – Hardness 40 IRHD
EN 2836:2012 Aerospace series – Chloroprene rubber (CR) – Heat resistance – Hardness 50 IRHD
EN 2837:2012 Aerospace series – Chloroprene rubber (CR) – Heat resistance – Hardness 60 IRHD
EN 2838:2013 Aerospace series – Chloroprene rubber (CR) – Heat resistance – Hardness 70 IRHD
EN 2839:2013 Aerospace series – Chloroprene rubber (CR) – Heat resistance – Hardness 80 IRHD
EN 283:1991 Swap bodies – Testing
EN 2840:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Mineral oil resistant – Hardness 50 IRHD
EN 2841:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Mineral oil resistant – Hardness 60 IRHD
EN 2842:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Mineral oil resistant – Hardness 70 IRHD
EN 2843:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Mineral oil resistant – Hardness 80 IRHD
EN 2844:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Mineral oil resistant – Hardness 90 IRHD
EN 2845:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Fuel and synthetic oil resistant – Hardness 50 IRHD
EN 2846:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Fuel and synthetic oil resistant – Hardness 60 IRHD
EN 28474:1992 Packaging – Complete, filled transport packages – Water immersion test (ISO 8474:1986)
EN 2847:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Fuel and synthetic oil resistant – Hardness 70 IRHD
EN 2848:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Fuel and synthetic oil resistant – Hardness 80 IRHD
EN 2849:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Fuel and synthetic oil resistant – Hardness 90 IRHD
EN 284:2006 Swap bodies – Non-stackable swap bodies of class C – Dimensions and general requirements
EN 2850:2017 Aerospace series – Carbon fibre thermosetting resin – Unidirectional laminates – Compression test parallel to fibre direction
EN 28510-1:2014 Adhesives – Peel test for a flexible-bonded-to-rigid test specimen assembly – Part 1: 90º peel
EN 2851:1992 Aerospace series – Marking of parts and assemblies other than engines – Indications on drawings
EN 2852:2010 Aerospace series – Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated – Classification: 1 100 MPa/650 °C
EN 2853:2005 Aerospace series – Current ratings for electrical cables with conductor EN 2083
EN 2854-002:2009 Aerospace series – Cables, electrical for general purpose – Cross sections equal to and
EN 2854-003:2009 Aerospace series – Cables, electrical for general purpose – Cross sections equal to and
EN 2856:2006 Aerospace series – Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore – Classification: 1 100 MPa/235 °C
EN 2858-1:1994 Aerospace series – Titanium and titanium alloys – Forging stock and forgings – Technical specification – Part 1: General requirements
EN 2858-2:1994 Aerospace series – Titanium and titanium alloys – Forging stock and forgings – Technical specification – Part 2: Forging stock
EN 2858-3:1994 Aerospace series – Titanium and titanium alloys – Forging stock and forgings – Technical specification – Part 3: Pre-production and production forgings
EN 2859:2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short
EN 285:2015 Sterilization – Steam sterilizers – Large sterilizers
EN 286-1:1998 Simple unfired pressure vessels designed to contain air or nitrogen – Part 1: Pressure vessels for general purposes
EN 286-1:1998/A1:2002 Simple unfired pressure vessels designed to contain air or nitrogen – Part 1: Pressure vessels for general purposes
EN 286-1:1998/A2:2005 Simple unfired pressure vessels designed to contain air or nitrogen – Part 1: Pressure vessels for general purposes
EN 286-1:1998/AC:2002 Simple unfired pressure vessels designed to contain air or nitrogen – Part 1: Pressure vessels for general purposes
EN 286-2:1992 Simple unfired pressure vessels designed to contain air or nitrogen – Part 2: Pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers
EN 286-2:1992/AC:1992 Simple unfired pressure vessels designed to contain air or nitrogen – Part 2: Pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers
EN 286-3:1994 Simple unfired pressure vessels designed to contain air or nitrogen – Part 3: Steel
EN 286-4:1994 Simple unfired pressure vessels designed to contain air or nitrogen – Part 4: Aluminium
EN 2862:2009 Aerospace series – Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in alloy
EN 2863:2010 Aerospace series – Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in heat
EN 28653:1992 Jewellery – Ring-sizes – Definition, measurement and designation (ISO 8653:1986)
EN 2865:2009 Aerospace series – Nuts, anchor, self-locking, floating, two lugs, with counterbore, in heat
EN 2866:2009 Aerospace series – Nuts, anchor, self-locking, floating, one lug, with counterbore, in steel,
EN 2867:2009 Aerospace series – Nuts, anchor, self-locking, floating, one lug, with counterbore, in heat
EN 2868:2019 Aerospace series – Nuts, hexagonal, slotted/castellated, normal height, normal across
EN 2869:2009 Aerospace series – Nuts, hexagonal, slotted/castellated, normal height, normal accross
EN 287-6:2018 Qualification test of welders – Fusion welding – Part 6: Cast irons
EN 2870:1996 Aerospace series – Bolts, normal bihexagonal head, close tolerance normal shank, short
EN 2870:1996/AC:1996 Aerospace series – Bolts, normal bihexagonal head, close tolerance normal shank, short
EN 28736:1992 Taper pins with internal thread, unhardened (ISO 8736:1986)
EN 28737:1992 Taper pins with external thread, unhardened (ISO 8737:1986)
EN 28738:1992 Plain washers for clevis pins – Product grade A (ISO 8738:1986)
EN 28749:1992 Pins and grooved pins – Shear test (ISO 8749:1986)
EN 2874:1996 Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium
EN 2874:1996/AC:1996 Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium
EN 28768:1992 Packaging – Complete, filled transport packages – Toppling test (ISO 8768:1986)
EN 2878:2018+AC:2019 Aerospace series – Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with
EN 2879:2017 Aerospace series – Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with
EN 2880:2018+AC:2019 Aerospace series – Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with
EN 2881:2006 Aerospace series – Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with
EN 2882:2006 Aerospace series – Nuts, hexagonal, self-locking, with counterbore and captive washer, in
EN 28839:1991 Mechanical properties of fasteners – Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
EN 2883:2009 Aerospace series – Nuts, hexagonal, self-locking, with counterbore and captive washer, in
EN 2884:1996 Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal
EN 2885:1996 Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal
EN 2886:1996 Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal
EN 2887:1995 Aerospace series – Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature) / 425 °C
EN 2888:2006 Aerospace series – Metric Bolts, normal hexagon head, coarse tolerance normal shank,
EN 2889:2006 Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank,
EN 2894:2018 Aerospace series – Nuts, bihexagonal, self-locking, with counterbore, in heat resisting
EN 2897:1996 Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal
EN 2898:2008 Aerospace series – Corrosion and heat resisting steel rivets – Technical specification
EN 2899:2018 Aerospace series – Vulcanized rubbers – Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers
EN 289:2014 Plastics and rubber machines – Compression moulding machines and transfer moulding machines – Safety requirements
EN 29008:1994 Glass bottles – Verticality – Test method (ISO 9008:1991)
EN 29009:1994 Glass containers – Height and non-parallelism of finish with reference to container base – Test methods (ISO 9009:1991)
EN 29052-1:1992 Acoustics – Determination of dynamic stiffness – Part 1: Materials used under floating floors in dwellings
EN 2906:1994 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) – Classification: 1 100 MPa (at ambient temperature) / 650 °C
EN 29073-1:1992 Textiles – Test methods for nonwovens – Part 1: Determination of mass per unit area
EN 29073-3:1992 Textiles – Test methods for nonwovens – Part 3: Determination of tensile strength and elongation
EN 2907:1995 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated – Classification: 1100 MPa (at ambient temperature) / 650 °C
EN 2908:1994 Aerospace series – Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) – Classification: 1 100 MPa (at ambient temperature) / 650 °C
EN 2909:1995 Aerospace series – Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting
EN 2910:1994 Aerospace series – Shank nuts, self-locking, in heat resisting steel FE – PA92HT (A286) – Classification: 1 100 MPa (at ambient temperature) / 650 °C
EN 2911:1995 Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1 100 MPa (at ambient temperature) / 650 °C
EN 2912:1996 Aerospace series – Washers, flat, large diameter, in aluminium alloy, anodized or chromated
EN 2913:1999 Aerospace series – Washers, flat, large diameter, in steel, cadmium plated
EN 2914:1996 Aerospace series – Washers, flat, large diameter, in heat resisting steel, passivated
EN 2923:2019 Aerospace series – Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated – Classification: 600 MPa (at ambient temperature) / 425 °C
EN 29241-2:1993 Ergonomic requirements for office work with visual display terminals (VDTs) – Part 2: Guidance on task requirements (ISO 9241-2:1992)
EN 2924:2019 Aerospace series – Nuts, hexagon, plain, reduced height, reduced across flats, in heat
EN 2925:1994 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat
EN 2926:1996 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat
EN 2927:1996 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat
EN 2928:1996 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat
EN 2929:1996 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat
EN 2930:1996 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat
EN 29313:1992 Resistance spot welding equipment – Cooling tubes (ISO 9313:1989)
EN 2931:1994 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel FEPA92HT (A286) – Classification: 900 MPa (at ambient temperature) / 650 °C
EN 2932:1996 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel FEPA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650°C
EN 2933:1996 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel
EN 2934:1996 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel
EN 2935:1996 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel
EN 29367-1:1993 Lashing and securing arrangements on road vehicles for sea transportation on Ro/ro
EN 29367-1:1993/AC:1994 Lashing and securing arrangements on road vehicles for sea transportation on Ro/ro
EN 29367-2:1994 Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships – General requirements – Part 2: Semi-trailers (ISO 9367-2:1994)
EN 2936:1996 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel
EN 2937:1994 Aerospace series – Screws, hexagon head, threaded to head, in heat resisting steel FEPA92HT (A286) – Classification: 900 MPa (at ambient temperature) / 650 °C
EN 2938:1995 Aerospace series – Screws, hexagon head, threaded to head, in heat resisting steel FEPA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature) / 650 °C
EN 2939:1994 Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to
EN 293:1992 Oil pressure atomizing nozzles – Minimum requirements – Testing
EN 2940:1995 Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to
EN 2941:2008 Aerospace series – Nickel alloy rivets – Technical specification
EN 2942:1998 Aerospace series – Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
EN 2943:2019 Aerospace series – Inserts, MJ and M screw threads, helical coil – Technical specification
EN 2944:2018 Aerospace series – Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
EN 29455-1:1993 Soft soldering fluxes – Test methods – Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:1990)
EN 29455-8:1993 Soft soldering fluxes – Test methods – Part 8: Determination of zinc content (ISO 9455- 8:1991)
EN 2945:1998 Aerospace series – Inserts, screw thread, helical coil, self-locking – Assembly procedure
EN 2947:2006 Aerospace series – Steel FE-PA3004 (X10CrNi18-09) – Air melted – Non heat treated – Cold drawn wire – a or D ≤ 2,3 mm
EN 2948:1996 Aerospace series – Washers, tab, in heat resisting steel, passivated
EN 2949:1996 Aerospace series – Washers, wire locking, in corrosion resisting steel, passivated
EN 295-1:2013 Vitrified clay pipe systems for drains and sewers – Part 1: Requirements for pipes, fittings and joints
EN 295-2:2013 Vitrified clay pipe systems for drains and sewers – Part 2: Evaluation of conformity and sampling
EN 295-3:2012 Vitrified clay pipe systems for drains and sewers – Part 3: Test methods
EN 295-4:2013 Vitrified clay pipe systems for drains and sewers – Part 4: Requirements for adaptors, connectors and flexible couplings
EN 295-5:2013 Vitrified clay pipe systems for drains and sewers – Part 5: Requirements for perforated pipes and fittings
EN 295-6:2013 Vitrified clay pipes systems for drain and sewers – Part 6: Requirements for components of manholes and inspection chambers
EN 295-7:2013 Vitrified clay pipe systems for drains and sewers – Part 7: Requirements for pipes and joints for pipe jacking
EN 2950:2008 Aerospace series – Test method – Wrought heat resisting alloys Semi-finished products
EN 29519:1993 Shipbuilding and marine structures – Rungs for dog-step ladders (ISO 9519:1990)
EN 2951:2019 Aerospace series – Metallic materials – Micrographic determination of content of nonmetallic inclusions
EN 2952:2019 Aerospace series – Heat resisting alloy NI-PH2601 – Solution treated and cold worked – Bar for forged fasteners – D ≤ 50 mm – 1 270 MPa ≤ Rm ≤ 1 550 MPa
EN 2954-001:2010 Aerospace series – Macrostructure of titanium and titanium alloy wrought products – Part 001: General requirements
EN 2954-002:2010 Aerospace series – Macrostructure of titanium and titanium alloy wrought products – Part 002: Macrostructure of bar, section, forging stock and forgings
EN 2955:1993 Aerospace series – Recycling of titanium and titanium alloy scrap
EN 2955:1993/AC:1995 Aerospace series – Recycling of titanium and titanium alloy scrap
EN 2957:2019 Aerospace series – Method of preparation of forged samples
EN 2959:2019 Aerospace series – Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) – Solution treated and cold worked – Bar for forged fasteners – 3 mm ≤ D ≤ 30 mm
EN 2960:2020 Aerospace series – Heat resisting nickel base alloy (NI-P101HT) – Cold worked and solution treated – Bars for machining for fasteners – 3 mm ≤ D ≤ 50 mm
EN 29658:1991 Steel – Determination of aluminium content – Flame atomic absorption spectrometric method (ISO 9658:1990)
EN 2985:1996 Aerospace series – Nickel-cadmium batteries of format A type
EN 29865:1993 Textiles – Determination of water repellency of fabrics by the Bundesmann rain-shower test (ISO 9865:1991)
EN 2986:1996 Aerospace series – Nickel-cadmium batteries of format B type
EN 2987:1996 Aerospace series – Nickel-cadmium batteries of format C type
EN 29885:1994 Wide-mouth glass containers – Deviation from flatness of top sealing surface – Test methods (ISO 9885:1991)
EN 2988:1996 Aerospace series – Nickel-cadmium batteries of format D type
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
EN 2991:1996 Aerospace series – Nickel-cadmium batteries of format E type
EN 2993:1996 Aerospace series – Nickel-cadmium batteries of format F type
EN 2995-001:2006 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A – Part 001: Technical specification
EN 2995-004:2006 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A – Part 004: With signal contact – Product standard
EN 2995-005:2006 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A – Part 005: With polarized signal contact – Product standard
EN 2996-001:2006 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A – Part 001: Technical specification
EN 2996-004:2006 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A – Part 004: With signal contact – Product standard
EN 2996-005:2006 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A – Part 005: With polarized signal contact – Product standard
EN 2997-001:2017 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-002:2016 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-003:2012 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-004:2006 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-005:2016 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-006:2017 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-007:2016 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-008:2006 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-009:2014 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-010:2014 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-011:2019 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire resistant
EN 2997-012:2009 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-013:2009 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-014:2016 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-015:2011 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2997-016:2010 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant
EN 2998:1996 Aerospace series – Washers, flat, in heat resisting steel, passivated
EN 299:2009 Oil pressure atomizing nozzles – Determination of the angle and spray characteristics
EN 2:1992 Classification of fires
EN 2:1992/A1:2004 Classification of fires
EN 3-10:2009 Portable fire extinguishers – Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
EN 3-7:2004+A1:2007 Portable fire extinguishers – Part 7: Characteristics, performance requirements and test methods
EN 3-8:2006 Portable fire extinguishers – Part 8: Additional requirements to EN 3-7 for the construction,
EN 3-8:2006/AC:2007 Portable fire extinguishers – Part 8: Additional requirements to EN 3-7 for the construction,
EN 3-9:2006 Portable fire extinguishers – Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers
EN 3-9:2006/AC:2007 Portable fire extinguishers – Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers
EN 30-1-1:2008+A3:2013 Domestic cooking appliances burning gas – Part 1-1: Safety – General
EN 30-1-2:2012 Domestic cooking appliances burning gas – Safety – Part 1-2: Appliances having forcedconvection ovens and/or grills
EN 30-1-3:2003+A1:2006 Domestic cooking appliances burning gas – Part 1-3: Safety – Appliances having a glass ceramic hotplate
EN 30-1-4:2012 Domestic cooking appliances burning gas – Safety – Part 1-4: Appliances having one or more burners with an automatic burner control system
EN 30-2-1:2015 Domestic cooking appliances burning gas – Part 2-1: Rational use of energy – General
EN 30-2-2:1999 Domestic cooking appliances burning gas – Part 2-2: Rational use of energy – Appliances having forced-convection ovens and/or grills
EN 3001:2019 Aerospace series – Tempered float glass plies for aircraft applications – Technical specification
EN 3004:1997 Aerospace series – Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601
EN 3005:2004 Aerospace series – Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NIPH1302 (Waspaloy), silver plated or uncoated – Classification: 1 210 MPa (at ambient
EN 3006:1994 Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature) / 650 °C
EN 3007:1996 Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting
EN 3008:1998 Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting
EN 3009:1998 Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting
EN 300:2006 Oriented Strand Boards (OSB) – Definitions, classification and specifications
EN 3010:1998 Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting
EN 3011:1998 Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting
EN 3012:1995 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NIP101HT (Waspaloy) – Classification: 1 210 MPa (at ambient temperature) / 730 °C
EN 3013:1995 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NIP101HT (Waspaloy), silver plated – Classification: 1 210 MPa (at ambient temperature) /
EN 3014:2015 Aerospace series – Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) – Classification: 1 100 MPa (at ambient temperature) / 650 °C
EN 301549:2019 Accessibility requirements for ICT products and services
EN 3015:2015 Aerospace series – Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated – Classification: 1 100 MPa (at ambient temperature) / 650 °C
EN 3016:2008 Aerospace series – Washers countersunk, load spreading – Heat resisting steel
EN 3017:2008 Aerospace series – Washers, facing/packing – Heat resisting steel
EN 3018:2019 Aerospace series – Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) – Consumable electrode remelted – Cold drawn wire for the manufacture of thread inserts – D ≤ 3 mm
EN 3019:2008 Aerospace series – Self-locking plate nuts, floating, two-lug, in heat resisting steel FEPA92HT (A286) – Classification: 1 100 MPa (at ambient temperature)/650 °C
EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures – Classification and performance requirements
EN 302-1:2013 Adhesives for load-bearing timber structures – Test methods – Part 1: Determination of longitudinal tensile shear strength
EN 302-2:2017 Adhesives for load-bearing timber structures – Test methods – Part 2: Determination of resistance to delamination
EN 302-3:2017 Adhesives for load-bearing timber structures – Test methods – Part 3: Determination of the
EN 302-4:2013 Adhesives for load-bearing timber structures – Test methods – Part 4: Determination of the effects of wood shrinkage on the shear strength
EN 302-5:2013 Adhesives for load-bearing timber structures – Test methods – Part 5: Determination of maximum assembly time under referenced conditions
EN 302-6:2013 Adhesives for load-bearing timber structures – Test methods – Part 6: Determination of the minimum pressing time under referenced conditions
EN 302-7:2013 Adhesives for load-bearing timber structures – Test methods – Part 7: Determination of the working life under referenced conditions
EN 302-8:2017 Adhesives for load-bearing timber structures – Test methods – Part 8: Static load test of multiple bond line specimens in compression shear
EN 3020:2008 Aerospace series – Self-locking plate nuts, floating, two-lug, in heat resisting steel FEPA92HT (A286), silver plated – Classification: 1 100 MPa (at ambient temperature)/650 °C
EN 3021:2017 Aerospace series – Molybdenum disulphide dry film lubricants graphite and halogen free – Technical specification
EN 3026:1994 Aerospace series – Test method for dry film lubricants – Corrosion test on steels specimens
EN 3027:1994 Aerospace series – Test method for dry film lubricants – Salt spray test
EN 303-1:2017 Heating boilers – Part 1: Heating boilers with forced draught burners – Terminology, general requirements, testing and marking
EN 303-2:2017 Heating boilers – Part 2: Heating boilers with forced draught burners – Special requirements for boilers with atomizing oil burners
EN 303-3:1998 Heating boilers – Part 3: Gas-fired central heating boilers – Assembly comprising a boiler body and a forced draught burner
EN 303-3:1998/A2:2004 Heating Boilers – Part 3 : Gas-fired heating boilers – Assembly comprising a boiler body and a forced draught burner
EN 303-3:1998/AC:2006 Heating boilers – Part 3: Gas-fired central heating boilers – Assembly comprising a boiler body and a forced draught burner
EN 303-4:1999 Heating boilers – Part 4: Heating boilers with forced draught burners – Special
EN 303-5:2012 Heating boilers – Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW – Terminology, requirements, testing and marking
EN 303-6:2019 Heating boilers – Part 6: Heating boilers with forced draught burners – Specific
EN 303-7:2006 Heating boilers – Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW
EN 3030:1994 Aerospace series – Test method for dry film lubricants – Solids content
EN 3032:1994 Aerospace series – Test method for dry film lubricants – Thickness measurement
EN 3033:2008 Aerospace series – Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated – Classification : 1 100 MPa/425 °C
EN 3034:2009 Aerospace series – Nuts, self-locking, hexagonal with captive washer – In heat resisting steel FE-PA92HT (A286), silver coated Classification: 1100 MPa/425 °C
EN 3034:2009/AC:2011 Aerospace series – Nuts, self-locking, hexagonal with captive washer – In heat resisting steel FE-PA92HT (A286), silver coated Classification: 1100 MPa/425 °C
EN 3035:1996 Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close
EN 3037:1996 Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal
EN 3038:1996 Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal
EN 3043:2008 Aerospace series – Fasteners, externally threaded, in heat resisting steel FE PA92HT
EN 3044:1998 Aerospace series – Installation holes for inserts, screw thread, helical coil, self-locking – Design standard
EN 3045:1993 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in steel – Diameter series 0 and 2 – Reduced clearance category – Dimensions and loads
EN 3046:1993 Aerospace series – Bearings, airframe rolling – Rigid single row bearings in steel, cadmium plated – Diameter series 0 and 2 – Reduced clearance category – Dimensions and loads
EN 3047:1993 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in corrosion
EN 3048:2001 Aerospace series – Bearings, spherical plain in corrosion resisting steel with selflubricating liner – Light series – Elevated load at ambient temperature – Dimensions and
EN 3049:1998 Aerospace series – O-rings, in fluorocarbon rubber (FKM), low compression set – Hardness 80 IRHD
EN 304:2017 Heating boilers – Test code for heating boilers for atomizing oil burners
EN 3050:1998 Aerospace series – O-rings, in fluorocarbon rubber (FKM), low compression set – Technical specification
EN 3052:2009 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short
EN 3053:1994 Aerospace series – Bearings, airframe rolling – Single row self-aligning roller bearings in steel – Dimensions and loads
EN 3054:1994 Aerospace series – Bearings, airframe rolling – Single row self-aligning roller bearings in steel, cadmium plated – Dimensions and loads
EN 3055:1994 Aerospace series – Bearings, airframe rolling – Single row self-aligining roller bearings in corrosion resisting steel – Dimensions and loads
EN 3056:1994 Aerospace series – Bearings, airframe rolling – Rigid double row ball bearings in steel – Dimensions and loads
EN 3057:1994 Aerospace series – Bearings, airframe rolling – Rigid double row ball bearings in steel, cadmium plated – Dimensions and loads
EN 3058:1994 Aerospace series – Bearings, airframe rolling – Rigid double row ball bearings in corrosion resisting steel – Dimensions and loads
EN 3059:2007 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated – Dimensions and loads
EN 305:1997 Heat exchangers – Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers
EN 3060:2007 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated – Dimensions and loads
EN 3061:2007 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing – Dimensions and loads
EN 3063:1994 Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length
EN 3064:1996 Aerospace series – Shank nuts, self-locking, serrated – Installation procedure
EN 3065:1996 Aerospace series – Installation holes for self-locking, serrated shank nuts – Design standard
EN 306:1997 Heat exchangers – Methods of measuring the parameters necessary for establishing the performance
EN 3079:2006 Aerospace series – Pipe coupling 8°30′ up to 28 000 kPa – Adaptors – Metric series – Technical specification
EN 307:1998 Heat exchangers – Guidelines to prepare installation, operating and maintenance instructions required to maintain the performance of each type of heat exchangers
EN 3080:2006 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees, reduced, branch with thrust wire nut
EN 3081:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Ferrules, welded with dynamic beam seal end, for repair
EN 3082:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, bulkhead welded end, for repair
EN 3082:2001/AC:2003 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, bulkhead welded end, for repair
EN 3083:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, bulkhead, long welded end, for repair
EN 3083:2001/AC:2003 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, bulkhead, long welded end, for repair
EN 3084:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, welded end threaded for repair
EN 3084:2001/AC:2003 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, welded end threaded for repair
EN 3086:2019 Aerospace series – Hose assemblies – Designation limited to 15 digits
EN 308:1997 Heat exchangers – Test procedures for establishing performance of air to air and flue gases heat recovery devices
EN 3094:2017 Aerospace series – Sealants – Test method – Determination of the application time
EN 309:2005 Particleboards – Definition and classification
EN 3102:2013 Aerospace series – Sealants – Test methods – Determination of low-temperature flexibility
EN 310:1993 Wood-based panels – Determination of modulus of elasticity in bending and of bending strength
EN 3112:1995 Aerospace series – Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature) / 235 °C
EN 3114-001:2006 Aerospace series – Test method – Microstructure of (α + β) titanium alloy wrought products – Part 001: General requirements
EN 3114-002:2007 Aerospace series – Test method – Microstructure of (α + β) titanium alloy wrought products – Part 002: Microstructure of bars, sections, forging stock and forgings
EN 3114-003:2006 Aerospace series – Test method – Microstructure of (α + β) titanium alloy wrought products – Part 003: Microstructure of plate
EN 3114-004:2006 Aerospace series – Test method – Microstructure of (α + β) titanium alloy wrought products – Part 004: Microstructure of sheet for superplastic forming
EN 3115:2009 Aerospace series – Aluminium alloy 7050-T73 – Wire for solid rivets — D ≤ 10 mm
EN 311:2002 Wood-based panels – Surface soundness – Test method
EN 3120:2012 Aerospace series – Titanium alloy TI-P64003 – Cold worked and stress relieved – Seamless tube for pressure systems – 4 mm ≤ D ≤ 51 mm – 690 MPa ≤ Rm ≤ 1 030 MPa
EN 312:2010 Particleboards – Specifications
EN 313-1:1996 Plywood – Classification and terminology – Part 1: Classification
EN 313-2:1999 Plywood – Classification and terminology – Part 2: Terminology
EN 3135:1996 Aerospace series – Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series
EN 3136:1996 Aerospace series – Rivets, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series
EN 3138:2001 Aerospace series – Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
EN 3139:2001 Aerospace series – Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series
EN 314-1:2004 Plywood – Bonding quality – Part 1: Test methods
EN 314-2:1993 Plywood – Bonding quality – Part 2: Requirements
EN 3140:2001 Aerospace series – Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series
EN 3141:1996 Aerospace series – Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, cadmium plated, inch based series
EN 3142:1996 Aerospace series – Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series
EN 3145:2001 Aerospace series – Round bars, hot rolled in steel – Normal tolerances – Diameter 6 mm < D < 250 mm – Dimensions
EN 3146:2001 Aerospace series – Round bars, hot rolled in steel – Close tolerances – Diameter 6 mm < = D < = 250 mm – Dimensions
EN 3148:2008 Aerospace series – Shank nuts, self-locking, flange restrained – Installation procedure
EN 3149:1996 Aerospace series – Shank nuts – Installation holes, 60° swage, flanges – Design standard
EN 3150:1995 Aerospace series – Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718)
EN 3151:1995 Aerospace series – Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718)
EN 3152:2004 Aerospace series – Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601
EN 3155-001:2016 Aerospace series – Electrical contacts used in elements of connection – Part 001: Technical Specification
EN 3155-002:2011 Aerospace series – Electrical contacts used in elements of connection – Part 002: List and utilization of contacts
EN 3155-003:2019 Aerospace series – Electrical contacts used in elements of connection – Part 003: Contacts, electrical, female, type A, crimp, class S – Product standard
EN 3155-004:2019 Aerospace series – Electrical contacts used in elements of connection – Part 004: Contacts, electrical, male, type A, crimp, class T – Product standard
EN 3155-005:2019 Aerospace series – Electrical contacts used in elements of connection – Part 005: Contacts, electrical, female, type A, crimp, class T – Product standard
EN 3155-008:2019 Aerospace series – Electrical contacts used in elements of connection – Part 008: Contacts, electrical, male, type A, crimp, class S – Product standard
EN 3155-009:2019 Aerospace series – Electrical contacts used in elements of connection – Part 009: Contacts, electrical, female, type A, crimp, class S – Product standard
EN 3155-012:2006 Aerospace series – Electrical contacts used in elements of connection – Part 012: Contacts, electrical, triaxial, size 8, male, type D, solder, class R – Product standard
EN 3155-013:2006 Aerospace series – Electrical contacts used in elements of connection – Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R – Product standard
EN 3155-014:2019 Aerospace series – Electrical contacts used in elements of connection – Part 014: Contacts, electrical, male, type A, crimp, class S – Product standard
EN 3155-015:2019 Aerospace series – Electrical contacts used in elements of connection – Part 015: Contacts, electrical, female, type A, crimp, class S – Product standard
EN 3155-016:2019 Aerospace series – Electrical contacts used in elements of connection – Part 016: Contacts, electrical, male, type A, crimp, class S – Product standard
EN 3155-017:2020 Aerospace series – Electrical contacts used in elements of connection – Part 017: Contacts, electrical, relay base, female, type A, crimp, class P – Product standard
EN 3155-018:2020 Aerospace series – Electrical contacts used in elements of connection – Part 018: Contacts, electrical, male, type A, crimp, class S – Product standard
EN 3155-019:2019 Aerospace series – Electrical contacts used in elements of connection – Part 019: Contacts, electrical, female, type A, crimp, class S – Product standard
EN 3155-022:2006 Aerospace series – Electrical contacts used in elements of connection – Part 022: Contacts, electrical rectangular, male, type A, crimp, class R – Product standard
EN 3155-023:2006 Aerospace series – Electrical contacts used in elements of connection – Part 023: Contacts, electrical rectangular, female, type A, crimp, class R – Product standard
EN 3155-024:2006 Aerospace series – Electrical contacts used in elements of connection – Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S – Product standard
EN 3155-025:2006 Aerospace series – Electrical contacts used in elements of connection – Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S – Product standard
EN 3155-026:2019 Aerospace series – Electrical contacts used in elements of connection – Part 026: Contacts, electrical, male, type A, crimp, class R – Product standard
EN 3155-027:2019 Aerospace series – Electrical contacts used in elements of connection – Part 027: Contacts, electrical, female, type A, crimp, class R – Product standard
EN 3155-028:2006 Aerospace series – Electrical contacts used in elements of connection – Part 028:
EN 3155-029:2007 Aerospace series – Electrical contacts used in elements of connection – Part 029:
EN 3155-030:2006 Aerospace series – Electrical contacts used in elements of connection – Part 030:
EN 3155-031:2006 Aerospace series – Electrical contacts used in elements of connection – Part 031:
EN 3155-032:2009 Aerospace series – Electrical contacts used in elements of connection – Part 032:
EN 3155-033:2009 Aerospace series – Electrical contacts used in elements of connection – Part 033:
EN 3155-034:2007 Aerospace series – Electrical contacts used in elements of connection – Part 034: Contacts, electrical, triaxial, size 08, male, type D, crimp, class R – Product standard
EN 3155-035:2012 Aerospace series – Electrical contacts used in elements of connection – Part 035: Contacts, electrical, triaxial, size 08, female, type D, crimp, class R – Product standard
EN 3155-039:2007 Aerospace series – Electrical contacts used in elements of connection – Part 039: Contacts, electrical, coaxial, size 16, female, type D, solder, class R – Product standard
EN 3155-040:2007 Aerospace series – Electrical contacts used in elements of connection – Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R – Product standard
EN 3155-041:2007 Aerospace series – Electrical contacts used in elements of connection – Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R – Product standard
EN 3155-042:2006 Aerospace series – Electrical contacts used in elements of connection – Part 042: Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P – Product standard
EN 3155-043:2006 Aerospace series – Electrical contacts used in elements of connection – Part 043:
EN 3155-044:2019 Aerospace series – Electrical contacts used in elements of connection – Part 044: Contacts, electrical, male 044, type A, double crimping, class T – Product standard
EN 3155-045:2019 Aerospace series – Electrical contacts used in elements of connection – Part 045: Contacts, electrical, female, type A, double crimping, class T – Product standard
EN 3155-046:2007 Aerospace series – Electrical contacts used in elements of connection – Part 046: Contacts, electrical, male, type A, double crimping, class S – Product standard
EN 3155-047:2007 Aerospace series – Electrical contacts used in elements of connection – Part 047: Contacts, electrical, female, type A, double crimping, class S – Product standard
EN 3155-052:2007 Aerospace series – Electrical contacts used in elements of connection – Part 052: Contacts, electrical, male 052, type A, crimp, class S – Product standard
EN 3155-053:2007 Aerospace series – Electrical contacts used in elements of connection – Part 053: Contacts, electrical, female 053, type A, crimp, class S – Product standard
EN 3155-054:2006 Aerospace series – Electrical contacts used in elements of connection – Part 054: Contacts, electrical, male thermocouple NiAl, type C, crimp, class T – Product standard
EN 3155-055:2006 Aerospace series – Electrical contacts used in elements of connection – Part 055: Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T – Product standard
EN 3155-056:2006 Aerospace series – Electrical contacts used in elements of connection – Part 056: Contacts, electrical, male, thermocouple NiCr, type C, crimp, class T – Product standard
EN 3155-057:2006 Aerospace series – Electrical contacts used in elements of connection – Part 057: Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T- Product standard
EN 3155-058:2006 Aerospace series – Electrical contacts used in elements of connection – Part 058: Contacts, electrical, coaxial, size 16, male, type D, solder, class R Product standard
EN 3155-059:2006 Aerospace series – Electrical contacts used in elements of connection – Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R Product standard
EN 3155-060:2006 Aerospace series – Electrical contacts used in elements of connection – Part 060: Contacts, electrical, coaxial, size 12, male, type D, solder, class R Product standard
EN 3155-061:2006 Aerospace series – Electrical contacts used in elements of connection – Part 061: Contacts, electrical, coaxial, size 12, female, type D, solder, class R Product standard
EN 3155-063:2009 Aerospace series – Electrical contacts used in elements of connection – Part 063:
EN 3155-064:2009 Aerospace series – Electrical contacts used in elements of connection – Part 064:
EN 3155-065:2019 Aerospace series – Electrical contacts used in elements of connection – Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 – Product standard
EN 3155-067:2009 Aerospace series – Electrical contacts used in elements of connection – Part 067: Contacts, electrical, coaxial, size 08, male, type D, solder, class R – Product standard
EN 3155-068:2009 Aerospace series – Electrical contacts used in elements of connection – Part 068: Contacts, electrical, coaxial, size 08, female, type D, solder, class R – Product standard
EN 3155-069:2009 Aerospace series – Electrical contacts used in elements of connection – Part 069: Contacts, electrical, coaxial, size 16, female, type D, solder, class P – Product standard
EN 3155-070:2019 Aerospace series – Electrical contacts used in elements of connection – Part 070: Contacts, electrical, male, type A, crimp, class S – Product standard
EN 3155-071:2019 Aerospace series – Electrical contacts used in elements of connection – Part 071: Contacts, electrical, female, type A, crimp, class S – Product standard
EN 3155-074:2009 Aerospace series – Electrical contacts used in elements of connection – Part 074: Contacts, electrical, quadrax, size 8, male, type E, crimp, class R – Product standard
EN 3155-075:2009 Aerospace series – Electrical contacts used in elements of connection – Part 075: Contacts, electrical, quadrax, size 8, female, type E, crimp, class R – Product standard
EN 3155-076:2019 Aerospace series – Electrical contacts used in elements of connection – Part 076: Contacts, electrical, male, type A, crimp, class R – Product standard
EN 3155-077:2019 Aerospace series – Electrical contacts used in elements of connection – Part 077: Contacts, electrical, female, type A, crimp, class R – Product standard
EN 3155-078:2019 Aerospace series – Electrical contacts used in elements of connection – Part 078: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class S – Product standard
EN 3155-079:2019 Aerospace series – Electrical contacts used in elements of connection – Part 079: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S – Product standard
EN 3155-080:2019 Aerospace series – Electrical contacts used in elements of connection – Part 080: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T – Product standard
EN 3155-081:2019 Aerospace series – Electrical contacts used in elements of connection – Part 081: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class T – Product standard
EN 3155-082:2019 Aerospace series – Electrical contacts used in elements of connection – Part 082: Contacts, electrical, female, type A, crimp, class S – Product standard
EN 3155-083:2019 Aerospace series – Electrical contacts used in elements of connection – Part 083: Contact, electrical, female, type A, crimp, class S, size 8 – Product standard
EN 315:2000 Plywood – Tolerances for dimensions
EN 3160:2007 Aerospace series – Steel FE-PM3801 (X5CrNiCu17-4) – Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1 310 MPa
EN 3161:2007 Aerospace series – Steel FE-PM3801 (X5CrNiCu17-4) – Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa
EN 3162:2007 Aerospace series – Steel FE-PM3801 (X5CrNiCu17-4) – Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa
EN 3163:2007 Aerospace series – Steel FE-PM3801 (X5CrNiCu17-4) – Air melted, softened, forging stock a or D ≤ 300 mm
EN 316:2009 Wood fibre boards – Definition, classification and symbols
EN 317:1993 Particleboards and fibreboards – Determination of swelling in thickness after immersion in water
EN 3182:2012 Aerospace series – Ball bearings, rigid in corrosion resisting steel cadmium plated, for control cable pulleys – Dimensions and loads
EN 318:2002 Wood based panels – Determination of dimensional changes associated with changes in relative humidity
EN 3196:1994 Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1 100 MPa (at ambient temperature) / 425 °C
EN 3197:2010 Aerospace series – Design and installation of aircraft electrical and optical interconnection systems
EN 319:1993 Particleboards and fibreboards – Determination of tensile strength perpendicular to the plane of the board
EN 31:2011+A1:2014 Wash basins – Connecting dimensions
EN 3201:2008 Aerospace series – Holes for metric threaded fasteners – Design standard
EN 3202:1995 Aerospace series – Holes and traps for T-head bolts – Design standard
EN 3207:1998 Aerospace series – Rubber compounds – Technical specification
EN 320:2011 Particleboards and fibreboards – Determination of resistance to axial withdrawal of screws
EN 3212:1995 Aerospace series – Paints and varnishes – Corrosion test by alternate immersion in a buffered sodium chloride solution
EN 3218-001:2006 Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 001: Technical specification
EN 3218-002:2006 Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 002: Specification of performance and contact arrangements
EN 3218-005:2006 Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 005: Plug with non-removable size 22 solder contacts – Product standard
EN 3218-006:2006 Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 006: Receptacle with non-removable size 22 solder contacts – Product standard
EN 3218-007:2006 Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 007: Plug with rear-removable size 20 crimp contacts – Product standard
EN 3218-008:2006 Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 008: Receptacle with rear-removable size 20 crimp contacts – Product standard
EN 3218-009:2006 Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors – Product standard
EN 3218-010:2006 Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors – Product standard
EN 3218-011:2006 Aerospace series – Connectors, rectangular, with metallic shells and screw-locking – Part
EN 3219:2020 Aerospace series – Heat resisting nickel base alloy (NI-P100HT) – Cold worked and
EN 321:2001 Wood-based panels – Determination of moisture resistance under cyclic test conditions
EN 3220:2019 Aerospace series – Heat resisting nickel base alloy (Ni-P101HT) – Cold worked and
EN 3226:2009 Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated – Classification 1 100 MPa/235 °C
EN 3227:2010 Aerospace series – Nuts, hexagonal, plain, normal height, normal across flats, in steel,
EN 3228:2010 Aerospace series – Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated – Classification: 900 MPa (at ambient temperature) / 235 °C
EN 3229:2009 Aerospace series – Nuts, hexagonal, plain, reduced height, normal across flats, in steel,
EN 322:1993 Wood-based panels – Determination of moisture content
EN 3230:2001 Aerospace series – Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in steel, cadmium plated – Classification: 900 MPa (at ambient temperature) / 235 °C
EN 3236:1998 Aerospace series – Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
EN 3237:1998 Aerospace series – Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
EN 3238:2010 Aerospace series – Metallic materials – Test method – Shear test for wires and rivets
EN 3239:1995 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NIP101HT (Waspaloy), silver plated thread – Classification: 1 210 MPa (at ambient
EN 323:1993 Wood-based panels – Determination of density
EN 324-1:1993 Wood-based panels – Determination of dimensions of boards – Part 1: Determination of thickness, width and length
EN 324-2:1993 Wood-based panels – Determination of dimensions of boards – Part 2: Determination of squareness and edge straightness
EN 3240:2007 Aerospace series – Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated – Classification: 1 100 MPa (at ambient temperature) / 425 °C
EN 3241:2008 Aerospace series – Nuts, self-locking, clip, in heat resisting steel FE-PA 92 HT (A 286), silver coated – Classification: 1 100 MPa (at ambient temperature) / 425 °C
EN 3243:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Ferrules, welded, with dynamic beam seal end
EN 3244:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, straight
EN 3245:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, straight, reducer
EN 3246:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, straight, bulkhead
EN 3247:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, bulkhead, welded end
EN 3248:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Adaptors, reduced pipe end, with lockring
EN 325:2012 Wood-based panels – Determination of dimensions of test pieces
EN 326-1:1994 Wood-based panels – Sampling, cutting and inspection – Part 1: Sampling and cutting of test pieces and expression of test results
EN 326-2:2010+A1:2014 Wood-based panels – Sampling, cutting and inspection – Part 2: Initial type testing and factory production control
EN 326-3:2003 Wood-based panels – Sampling, cutting and inspection – Part 3: Inspection of an isolated lot of panels
EN 3264:2018 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Thrust wire nuts
EN 3266:2001 Aerospace series – Pipe coupling in titanium alloy – Bulkhead nuts
EN 3267:2001 Aerospace series – Washers, bulkhead, in titanium alloy
EN 3268:2014 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Pressure plugs
EN 3269:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Ferrules, blind, with dynamic beam seal end
EN 3270:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Blanking plugs with lockring
EN 3270:2001/AC:2003 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Blanking plugs with lockring
EN 3272:2001 Aerospace series – Pipe coupling 8°30′ – Dynamic beam seal end for ferrule, welded – Geometric configuration
EN 3273:2001 Aerospace series – Pipe coupling 8°30′ – Dynamic beam seal end for elbows, tees and crosses – Geometric configuration
EN 3274:2010 Aerospace series – Pipe coupling 8°30′ – Thread end – Geometric configuration
EN 3275:2019 Aerospace series – Pipe coupling 8°30′ up to 28 000 kPa Dynamic beam seal – Metric series – Technical specification
EN 3278:2019 Aerospace series – Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
EN 327:2014 Heat exchangers – Forced convection air cooled refrigerant condensers – Test procedures for establishing performance
EN 3280:2011 Aerospace series – Bearings, airframe rolling, rigid or self-aligning – Technical specification
EN 3281:1994 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in steel – Diameter series 8 and 9 – Dimensions and loads
EN 3282:1994 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in steel, cadmium plated – Diameter series 8 and 9 – Dimensions and loads
EN 3283:1994 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in corrosion resisting steel – Diameter series 8 and 9 – Dimensions and loads
EN 3284:1994 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in steel – Diameter series 0 and 2 – Normal clearance category – Dimensions and loads
EN 3285:1994 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in steel,
EN 3286:1994 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in corrosion
EN 3287:1994 Aerospace series – Bearings, airframe rolling – Double row self-aligning ball bearings in steel – Diameter series 2 – Dimensions and loads
EN 3288:1994 Aerospace series – Bearings, airframe rolling – Double row self-aligning ball bearings in steel, cadmium plated – Diameter series 2 – Dimensions and loads
EN 3289:1994 Aerospace series – Bearings, airframe rolling – Double row self-aligning ball bearings in corrosion resisting steel – Diameter series 2 – Dimensions and loads
EN 328:2014 Heat exchangers – Forced convection unit air coolers for refrigeration – Test procedures for establishing the performance
EN 3290:1994 Aerospace series – Bearings, airframe rolling – Single row self-aligning roller bearings in steel – Diameter series 3 and 4 – Dimensions and loads
EN 3291:1994 Aerospace series – Bearings, airframe rolling – Single row self-aligning roller bearings in steel, cadmium plated – Diameter series 3 and 4 – Dimensions and loads
EN 3292:1994 Aerospace series – Bearings, airframe rolling – Single row self-aligning roller bearings in corrosion resisting steel – Diameter series 3 and 4 – Dimensions and loads
EN 3293:2008 Aerospace series – Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated – Classification: 1 275 MPa/650 °C
EN 3294:2008 Aerospace series – Bolts, T-head, close tolerance, in heat resisting nickel base alloy NIP101HT (Waspaloy), uncoated for increased height nuts -Classification: 1 210 MPa/730
EN 3297:1998 Aerospace series – Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) – Technical specification
EN 3298:2008 Aerospace series – Inserts, thin wall, self-locking – Installation and removal procedure
EN 3299:2019 Aerospace series – Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated – Technical specification
EN 3301:2007 Aerospace series – Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated – Classification: 1 000 MPa/550 °C
EN 3302:2017 Aerospace series – Bolts in heat resisting steel FE-PM1708 (FV535) – Classification: 1 000 MPa/550 °C – Technical specification
EN 3303:1997 Aerospace series – Screw, cap head, hexagon socket, coarse tolerance normal shank,
EN 3304:1996 Aerospace series – Screws, 100° countersunk reduced head, offset cruciform recess,
EN 3305:1996 Aerospace series – Screws, 100° countersunk reduced head, offset cruciform recess,
EN 3306:1996 Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess,
EN 3307:1996 Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in
EN 3308:1996 Aerospace series – Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature)/315°C
EN 330:2014 Wood preservatives – Determination of the relative protective effectiveness of a wood
EN 3310:2011 Aerospace series – Titanium alloy TI-P64001 (Ti-6Al-4V) – Not heat treated – Forging stock, for annealed forgings – De ≤ 360 mm
EN 3311:2009 Aerospace series – Titanium alloy TI-P64001 (Ti-6Al-4V) – Annealed – Bar for machining – D < 110 mm
EN 3312:2012 Aerospace series – Titanium alloy Ti-6Al-4V – Annealed – Forgings De ≤ 150 mm
EN 3314:2019 Aerospace series – Titanium alloy TI-P64001 – Solution treated and aged – Bar for machining – D ≤ 75 mm
EN 3315:2018 Aerospace series – Titanium alloy TI-P64001 – Solution treated and aged – Forgings – De ≤ 75 mm
EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 3323:2009 Aerospace series – Bolts with double hexagon head, relieved shank. long thread, – In heat resisting steel FE-PM 38 (FV 535) – Classification: 1 000 MPa/550 °C
EN 3324:2007 Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV535) – Classification: 1 000 MPa/550 °C – Unplated
EN 3325:2007 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel, FEPM1708 (FV535) – Classification: 1 000 MPa/550 °C – Unplated
EN 3326:2007 Aerospace series – Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718) – Classification: 1 275 MPa/650 °C, unplated
EN 3327:2008 Aerospace series – Bolts, double hexagon head, close tolerance, medium thread length, in
EN 3328:2008 Aerospace series – Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated – Classification: 1 000 MPa/550 °C
EN 3329:2009 Aerospace series – Steel FE-PL1503 (35CrMo4) – Annealead – Sheet and strip – 0,3 mm ≤ a ≤ 2 mm – For prevailing torque nuts
#NAZWA?
EN 3332:2005 Aerospace series – Aluminium alloy AL-P7475-T762 – Clad sheet and strip – 1,0 mm <=”” td=””>
EN 3333:2005 Aerospace series – Aluminium alloy AL-P7475-T762 – Sheet and strip – 0,6 mm <=”” td=””>
EN 3335:2005 Aerospace series – Aluminium alloy AL-P7475-O2 – Sheet for superplastic forming (SPF) – 0,8 mm <=”” td=””>
EN 3338:2005 Aerospace series – Aluminium alloy AL-P7050 – T74511 – Extruded bar and section – a or D <=”” td=””>
EN 3339:2006 Aerospace series – Aluminium alloy AL-P7010-T76 – Die forgings – a ≤ 200 mm
EN 3341:2005 Aerospace series – Aluminium alloy AL-P6061-T4 or T42 – Sheet and strip – 0,4 mm <=”” td=””>
EN 3342:2005 Aerospace series – Aluminium alloy AL-P6061 – T4 or T42 – Drawn or extruded bar and section – a or D <=”” td=””>
EN 3344:2005 Aerospace series – Aluminium alloy AL-P7050 – T76511 – Extruded bar and section – a or D <=”” td=””>
EN 3347:2005 Aerospace series – Aluminium alloy AL-P2024 – T8511 – Extruded bar and section – a or D <=”” td=””>
EN 334:2019 Gas pressure regulators for inlet pressure up to 10 MPa (100 bar)
EN 3351:2012 Aerospace series – Titanium alloy Ti-4Al-4Mo-2Sn – Solution treated and aged – Forgings – De ≤ 150 mm
EN 3354:2013 Aerospace series – Titanium alloy Ti-6Al-4V – Annealed – Sheet for superplastic forming – a ≤ 6 mm
EN 3355:2012 Aerospace series – Titanium alloy TI-P64001 (Ti-6Al-4V) – Annealed – Extruded section – De ≤ 150 mm – 900 MPa ≤ Rm ≤ 1 160 MPa
EN 3357:2019 Aerospace series – Steel FE-PM1503 (X3CrNiMoAl 13-8-2) – Vacuum induction melted
EN 3358:2020 Aerospace series – Steel FE-PM1503 (X3CrNiMoAl 13-8-2) – Vacuum induction melted
EN 3359:2007 Aerospace series – Steel FE-PM1503 (X3CrNiMoAl13-8-2) – Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
EN 335:2013 Durability of wood and wood-based products – Use classes: definitions, application to solid wood and wood-based products
EN 3361:2007 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted,
EN 3364:2007 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
EN 3365:2007 Aerospace series – Steel FE-PM3901 (X15CrNi17-3) – Air melted, softened, forging stock a or D ≤ 300 mm
EN 3368:2008 Aerospace series – Aerospace design standard – Holes for locating pins
EN 336:2013 Structural timber – Sizes, permitted deviations
EN 3371:2019 Aerospace series – Electrical bonding – Technical specification
EN 3372-001:2007 Aerospace series – Connectors, electrical, circular, medium and high contact density,
EN 3372-002:2007 Aerospace series – Connectors, electrical, circular, medium and high contact density,
EN 3372-003:2007 Aerospace series – Connectors, electrical, circular, medium and high contact density,
EN 3372-005:2007 Aerospace series – Connectors, electrical, circular, medium and high contact density,
EN 3372-006:2007 Aerospace series – Connectors, electrical, circular, medium and high contact density,
EN 3372-007:2007 Aerospace series – Connectors, electrical, circular, medium and high contact density,
EN 3372-008:2007 Aerospace series – Connectors, electrical, circular, medium and high contact density,
EN 3372-009:2007 Aerospace series – Connectors, electrical, circular, medium and high contact density,
EN 3372-011:2007 Aerospace series – Connectors, electrical, circular, medium and high contact density,
EN 3373-001:2007 Aerospace series – Terminal lugs and in-line splices for crimping on electric conductors – Part 001: Technical specification
EN 3373-002:2009 Aerospace series – Terminal lugs and in-line splices for crimping on electric conductors – Part 002: General and list of product standard
EN 3373-007:2012 Aerospace series – Terminal lugs and in-line splices for crimping on electric conductors –
EN 3373-008:2012 Aerospace series – Terminal lugs and in-line splices for crimping on electric conductors –
EN 3373-010:2009 Aerospace series – Terminal lugs and in-line splices for crimping on electric conductors –
EN 3373-011:2009 Aerospace series – Terminal lugs and in-line splices for crimping on electric conductors –
EN 3373-012:2005 Aerospace series – Terminal lugs and in-line splices for crimping on electric conductors –
EN 3373-013:2005 Aerospace series – Terminal lugs and in-line splices for crimping on electric conductors –
EN 3373-014:2009 Aerospace series – Terminal lugs and in-line splices for crimping on electric conductors –
EN 3375-001:2018 Aerospace series – Cable, electrical, for digital data transmission – Part 001: Technical specification
EN 3375-002:2012 Aerospace series – Cable, electrical, for digital data transmission – Part 002: General
EN 3375-003:2007 Aerospace series – Cable, electrical, for digital data transmission – Part 003: Single braid – 77 Ohms – Type KG – Product standard
EN 3375-004:2007 Aerospace series – Cable, electrical, for digital data transmission – Part 004: Double braid – 77 Ohms – Type WJ – Product standard
EN 3375-005:2007 Aerospace series – Cable, electrical, for digital data transmission – Part 005: Double braid + metallic layer – 77 Ohms – Type WV – Product standard
EN 3375-006:2006 Aerospace series – Cable, electrical, for digital data transmission – Part 006: Single braid – 78 Ohms – Type XM – Product standard
EN 3375-007:2016 Aerospace series – Cable, electrical, for digital data transmission – Part 007: Double braid – 77 Ohms – Type WW – Product standard
EN 3375-008:2009 Aerospace series – Cable, electrical, for digital data transmission – Part 008: Single braid – Star Quad 100 ohms – Type KD – Product standard
EN 3375-009:2016 Aerospace series – Cable, electrical, for digital data transmission – Part 009: Single braid – CAN Bus – 120 ohms – Type WX – Product standard
EN 3375-011:2017 Aerospace series – Cable, electrical for digital data transmission – Part 011: Single braid – Star Quad 100 ohms – Light weight – Type KL – Product standard
EN 3375-012:2013 Aerospace series – Cable, electrical, for digital data transmission – Part 012: Single braid – Star Quad 100 ohms – 260 °C – Type KH – Product standard
EN 3377:1996 Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A 286) – Classification: 1 100 MPa (at ambient temperature)/425°C
EN 3378:2019 Aerospace series – Titanium TI-P99002 – Annealed – Wires for rivets – 1,6 mm ≤ D ≤ 10 mm
EN 3379:1996 Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length
EN 3380:1996 Aerospace series – Rings, retaining – Technical specification
EN 3381:1996 Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close
EN 3382:2012 Aerospace series – Rings retaining, internal, axial mounting, steel, phosphated
EN 3383:2012 Aerospace series – Rings retaining, internal, axial mounting, steel, vacuum cadmium plated
EN 3384:2012 Aerospace series – Rings retaining, external, axial mounting, steel, phosphated
EN 3385:2012 Aerospace series – Rings retaining, external, axial mounting, steel, vacuum cadmium plated
EN 3386:2012 Aerospace series – Rings retaining, radial mounting, steel, phosphated
EN 3388:2009 Aerospace series – Fasteners, externally threaded, in heat resisting nickel base alloy NIPH2601 (Inconel 718) – Classification 1 275 MPa/650 °C – Manufacturing method optional –
EN 3389:2009 Aerospace series – Fasteners, externally threaded, in heat resisting nickel base alloy NIPH1302 (Waspaloy) – Classification: 1 210 MPa/730 °C – Manufacturing method optional –
EN 338:2016 Structural timber – Strength classes
EN 33:2019 WC pans and WC suites – Connecting dimensions
EN 3417:2012 Aerospace series – Rivets, solid, universal head, in nickel base alloy NI-P11, metric series
EN 341:2011 Personal fall protection equipment – Descender devices for rescue
EN 3425:2006 Aerospace series – Groove dimensions for axial mouting internal type retaining rings
EN 3426:2006 Aerospace series – Groove dimensions for axial mounting external type retaining rings
EN 3427:2006 Aerospace series – Groove dimensions for radial mounting retaining rings
EN 342:2017 Protective clothing – Ensembles and garments for protection against cold
EN 3431:2007 Aerospace series – Nuts, hexagonal, self-locking, with counterbore and captive washer, in
EN 3435:2010 Aerospace series – Nuts, anchor, self-locking, floating, two lug, reduced series, with
EN 343:2019 Protective clothing – Protection against rain
EN 3444:2006 Aerospace series – Bolt, large bihexagonal head, close tolerance normal shank, medium
EN 3446:1995 Aerospace series – Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment – Dimensions and loads
EN 3451:2017 Aerospace series – Titanium TI-P99002 – Not heat treated – Grade 2 forging stock, for annealed forgings – a or D ≤ 300 mm
EN 3456:2012 Aerospace series – Titanium alloy TI-P64001 (Ti-6Al-4V) – Annealed – Sheet and strip, hot rolled — a ≤ 6 mm
EN 3459:2010 Aerospace series – Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) – Solution treated and aged – Plate – 6 mm < a ≤ 50 mm
EN 3460:2019 Aerospace series – Titanium TI-P99002 – Annealed – Bar for machining – a or D ≤ 150 mm – Rm ≥ 390 MPa
EN 3464:2012 Aerospace series – Titanium alloy Ti-6Al-4V – Annealed – Plate – 6 mm < a ≤ 100 mm
EN 3468:2019 Aerospace series – Steel X8CrNiTi18-10 (1.4878/1.4544) – Softened – 500 MPa ≤ Rm ≤ 700 MPa – Forgings – De ≤ 100 mm
EN 3469:2009 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted – Solution treated and precipitation treated – Forgings – a or D ≤ 200 mm – Rm ≥ 1 310 MPa
EN 3470:2019 Aerospace series – Steel FE-PM1503 (X3CrNiMoAl13-8-2) – Vacuum induction melted and
EN 3474:2005 Aerospace series – Aluminium alloy AL-P2024-T81 – Sheet and strip – 0,25 mm <=”” td=””>
EN 3475-100:2010 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 100: General
EN 3475-201:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 201: Visual examination
EN 3475-202:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 202: Mass
EN 3475-203:2006 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 203: Dimensions
EN 3475-301:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 301: Ohmic resistance per unit length
EN 3475-302:2006 Aerospace series – Cable, electrical, aircraft use – Test methods – Part 302: Voltage proof test
EN 3475-303:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 303: Insulation resistance
EN 3475-304:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 304: Surface resistance
EN 3475-305:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 305: Overload resistance
EN 3475-306:2005 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 306: Continuity of conductors
EN 3475-307:2015 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 307: Corona extinction voltage
EN 3475-401:2002 Aerospace series – Cables, electrical, aircraft use – Test Methods – Part 401: Accelerated ageing
EN 3475-402:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 402: Shrinkage and delamination
EN 3475-403:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 403: Delamination and blocking
EN 3475- 403:2002/AC:2003
EN 3475-404:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 404: Thermal shock
EN 3475-405:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 405: Bending at ambient temperature
EN 3475-406:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 406: Cold bend test
EN 3475-407:2009 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 407 : Flammability
EN 3475-408:2005 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 408: Fire resistance
EN 3475-409:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 409: Air-excluded ageing
EN 3475-410:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 410: Thermal endurance
EN 3475-411:2018 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 411: Resistance to fluids
EN 3475-412:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 412: Humidity resistance
EN 3475-413:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 413: Wrap back test
EN 3475-414:2005 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 414: Differential scanning calorimeter (DSC test)
EN 3475-415:2005 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 415: Rapid change of temperature
EN 3475-416:2005 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 416: Thermal stability
EN 3475-417:2009 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 417: Fire resistance of cables confined inside a harness
EN 3475-418:2019 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 418: Thermal endurance for conductors
EN 3475-501:2006 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 501: Dynamic cutthrough
EN 3475-502:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 502: Notch propagation
EN 3475-503:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 503: Scrape abrasion
EN 3475-504:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 504: Torsion
EN 3475-505:2012 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 505: Tensile test on conductors and strands
EN 3475-506:2007 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 506: Plating continuity
EN 3475-507:2007 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 507: Adherence of plating
EN 3475-508:2007 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 508: Plating thickness
EN 3475-509:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 509: Solderability
EN 3475-510:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material
EN 3475-511:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 511: Cable-tocable abrasion
EN 3475-512:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 512: Flexure endurance
EN 3475-513:2020 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 513: Deformation resistance (Installation with plastic cable ties)
EN 3475-514:2014 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 514: Porosity of copper cladding on aluminium strands
EN 3475-515:2009 Aerospace series – Cable, electrical, aircraft use – Test methods – Part 515: Crush resistance
EN 3475-601:2007 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 601: Smoke density
EN 3475-602:2007 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 602: Toxicity
EN 3475-603:2018 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 603: Resistance to wet arc tracking
EN 3475-604:2018 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 604: Resistance to dry arc propagation
EN 3475-605:2018 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 605: Wet short circuit test
EN 3475-701:2017 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 701: Strippability and adherence of insulation to the conductor
EN 3475-702:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 702: Screen pushback capability
EN 3475-703:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 703: Permanence of manufacturer’s marking
EN 3475-704:2007 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 704: Flexibility
EN 3475-705:2005 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 705: Contrast measurement
EN 3475-706:2005 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 706: Laser markability
EN 3475-707:2017 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 707: Stabilization of assembly
EN 3475-801:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 801: Capacitance per unit length
EN 3475-802:2009 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 802: Capacitance unbalance
EN 3475-803:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 803: Capacitance variation
EN 3475-804:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 804: Velocity of propagation
EN 3475-805:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 805: Characteristic impedance
EN 3475-806:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 806: Attenuation
EN 3475-807:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 807: Transfer impedance
EN 3475-808:2002 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 808: Cross-talk
EN 3475-809:2009 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 809: Resistance unbalance
EN 3475-810:2009 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 810: Structural return loss
EN 3475-811:2009 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 811: Unbalance attenuation
EN 3475-812:2009 Aerospace series – Cables, electrical, aircraft use – Test methods – Part 812: Return loss (VSWR)
EN 3476:2006 Aerospace series – Steel FE-PL1501 (30CrMo12) – Air melted – Softened – Forging stock – a or D ≤ 300 mm
EN 3479:2007 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted –
EN 3480:2007 Aerospace series – Steel FE-PA3601 (X6CrNiTi18-10) – Air melted – Softened – Plate – 6 mm < a ≤ 50 mm – 500 MPa ≤ Rm ≤ 700 MPa
EN 3481:2019 Aerospace series – Steel X8CrNiTi18-10 (1.4878/1.4544) – Annealed – Reference heat treatment: softened – Hollow bars – 5 mm ≤ a ≤ 12 mm
EN 3482:2019 Aerospace series – Steel X8CrNiTi18-10 (1.4878/1.4544) – Annealed – Reference heat treatment: softened – Forging stock – De ≤ 100 mm
EN 3484:2019 Aerospace series – Steel X5CrNiCuNb16-4 (1.4549 type 1.4542) – As cast – Reference
EN 3486:2019 Aerospace series – Steel X3CrNiMoAl13-8-2 (1.4534) – Solution annealed and precipitation hardened – 1 400 ≤ Rm ≤ 1 550 MPa – Forgings – De ≤ 100 mm
EN 3487:2007 Aerospace series – Steel FE-PA3601 (X6CrNiTi18-10) – Air melted – Softened – Bar for machining – a or D ≤ 250 mm – 500 MPa ≤ Rm ≤ 700 MPa
EN 3488:2007 Aerospace series – Steel FE-PA3601 (X6CrNiTi18-10) – Air melted – Softened – Sheet and strip – a ≤ 6 mm – 500 MPa ≤ Rm ≤ 700 MPa
EN 3489:2019 Aerospace series – Steel X8CrNiTi18-10 (1.4878/1.4544) – Softened – 500 ≤ Rm ≤ 750 MPa – Tubes for structures – 0,5 ≤ a ≤ 5 mm
EN 348:1992 Protective clothing – Test method: Determination of behaviour of materials on impact of small splashes of molten metal
EN 348:1992/AC:1993 Protective clothing – Test method: Determination of behaviour of materials on impact of small splashes of molten metal
EN 3490:2007 Aerospace series – Steel FE-PM3901 (X15CrNi17-3) – Air melted – Hardened and tempered – Bar for machining – De ≤ 200 mm – 900 MPa ≤ Rm ≤ 1 100 MPa
EN 3491:2006 Aerospace series – Steel FE-PM3901 (X15CrNi17-3) – Air melted – Hardened and tempered – Forgings – De ≤ 100 mm – 900 MPa ≤ Rm ≤ 1 100 MPa
EN 3506:2001 Aerospace series – Hot rolled sheets and plates in heat resisting alloys – Thickness 2,0 mm < = a < = 100 mm – Dimensions
EN 3507:2006 Aerospace series – Steel FE-PL1501 (30CrMo12) – Air melted – Hardened and tempered – Forgings – De ≤ 100 mm – 930 MPa ≤ Rm ≤ 1 080 MPa
EN 350:2016 Durability of wood and wood-based products – Testing and classification of the durability to biological agents of wood and wood-based materials
EN 351-1:2007 Durability of wood and wood-based products – Preservative-treated solid wood – Part 1: Classification of preservative penetration and retention
EN 351-2:2007 Durability of wood and wood-based products – Preservative-treated solid wood – Part 2: Guidance on sampling for the analysis of preservative-treated wood
EN 3510:2019 Aerospace series – Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) – Solution treated and precipitation treated – Bars and sections – De ≤ 100 mm
EN 352-1:2002 Hearing protectors – General requirements – Part 1: Ear-Muffs
EN 352-2:2002 Hearing protectors – General requirements – Part 2: Ear-plugs
EN 352-3:2002 Hearing protectors – General requirements – Part 3: Ear-muffs attached to an industrial safety helmet
EN 352-4:2001 Hearing protectors – Safety requirements and testing – Part 4: Level-dependent ear-muffs
EN 352-4:2001/A1:2005 Hearing protectors – Safety requirements and testing – Part 4: Level-dependent ear-muffs
EN 352-5:2002 Hearing protectors – Safety requirements and testing – Part 5: Active noise reduction earmuffs
EN 352-5:2002/A1:2005 Hearing protectors – Safety requirements and testing – Part 5: Active noise reduction earmuffs
EN 352-6:2002 Hearing protectors – Safety requirements and testing – Part 6: Ear-muffs with electrical audio input
EN 352-7:2002 Hearing protectors – Safety requirements and testing – Part 7: Level-dependent ear-plugs
EN 352-8:2008 Hearing protectors – Safety requirements and testing – Part 8: Entertainment audio earmuffs
EN 3523:2007 Aerospace series – Steel FE-PL1505 (15CrMoV6) – Air melted – Hardened and tempered – Bar for machining – De ≤ 100 mm – 1 080 MPa ≤ Rm ≤ 1 280 MPa
EN 3524:2007 Aerospace series – Steel FE-PL1505 (15CrMoV6) – Air melted – Hardened and tempered – Sheet and strip – 2 mm ≤ a ≤ 6 mm – 1 080 MPa ≤ Rm ≤ 1 280 MPa
EN 3525:2007 Aerospace series – Steel FE-PL1505 (15CrMoV6) – Air melted – Hardened and tempered – Plate – 6 mm < a ≤ 20 mm – 1 080 MPa ≤ Rm ≤ 1 280 MPa
EN 3526:2007 Aerospace series – Steel FE-PL1505 (15CrMoV6) – Air melted – Hardened and tempered – Sheet and strip – 0,5 mm ≤ a ≤ 6 mm – 980 MPa ≤ Rm ≤ 1 180 MPa
EN 3527:2007 Aerospace series – Steel FE-PL1504 (33CrMoV12) – Air melted – Softened – Forging stock – a or D ≤ 300 mm
EN 3528:2013 Aerospace series – Steel X2NiCoMo18-8-5 (1.6359) – Vacuum induction melted and
EN 3529:2010 Aerospace series – Steel FE-PM2701 (X2NiCoMo18-8-5) – Vacuum induction melted and
EN 353-1:2014+A1:2017 Personal fall protection equipment – Guided type fall arresters including an anchor line – Part 1: Guided type fall arresters including a rigid anchor line
EN 353-2:2002 Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line
EN 3531:2007 Aerospace series – Steel FE-PM2701 (X2NiCoMo18-8-5) – Vacuum induction melted and
EN 3532:2007 Aerospace series – Steel FE-PM2701 (X2NiCoMo18-8-5) – Vacuum induction melted and
EN 3536:2006 Aerospace series – Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature)/315 °C
EN 3537:2010 Aerospace series – Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat
EN 3538:2010 Aerospace series – Nuts, anchor, self-locking, fixed, two lug, reduced series, with
EN 3539:2010 Aerospace series – Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat
EN 3541:1992 Aerospace series – Rod ends, adjustable, self-aligning ball bearing with threaded shank – Dimensions, torques, clearances and loads
EN 3542:2018 Aerospace series – Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)
EN 3543:1997 Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close
EN 3545-001:2008 Aerospace series – Connectors, electrical, rectangular, with sealed and non-sealed rear,
EN 3545-002:2008 Aerospace series – Connectors, electrical, rectangular, with sealed and non-sealed rear,
EN 3545-003:2005 Aerospace series – Connectors, electrical, rectangular, with sealed and non-sealed rear,
EN 3545-004:2005 Aerospace series – Connectors, electrical, rectangular, with sealed and non-sealed rear,
EN 3545-005:2014 Aerospace series – Connectors, electrical, rectangular, with sealed and non-sealed rear,
EN 3545-006:2015 Aerospace series – Connectors, electrical, rectangular, with sealed and non-sealed rear,
EN 3545-007:2014 Aerospace series – Connectors, electrical, rectangular, with sealed and non-sealed rear,
EN 3545-008:2006 Aerospace series – Connectors, electrical, rectangular, with sealed and non-sealed rear,
EN 3545-009:2008 Aerospace series – Connectors, electrical, rectangular, with sealed and non-sealed rear,
EN 354:2010 Personal fall protection equipment – Lanyards
EN 3552:2005 Aerospace series – Aluminium alloy AL-P2618A-T6 or T62 – Clad sheet and strip – 0,4 mm <=”” td=””>
EN 3553:2004 Aerospace series – Aluminium alloy AL-P2618A – T6511 – Extruded bar and section – a or D
EN 355:2002 Personal protective equipment against falls from a height – Energy absorbers
EN 3561:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Ferrules with dynamic beam seal end, welded and reduced at pipe end
EN 3561:2001/AC:2003 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Ferrules with dynamic beam seal end, welded and reduced at pipe end
EN 3566:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Adaptors with lockring
EN 3566:2001/AC:2003 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Adaptors with lockring
EN 3567-001:2001 Aerospace series – In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B – Part 001: Technical specification
EN 3567-003:2001 Aerospace series – In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B – Part 003: Single in-line couplers – Product standard
EN 3567-004:2001 Aerospace series – In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B – Part 004: Double in-line couplers – Product standard
EN 356:1999 Glass in building – Security glazing – Testing and classification of resistance against manual attack
EN 358:2018 Personal protective equipment for work positioning and prevention of falls from a height – Belts and lanyards for work positioning or restraint
EN 35:2014 Pedestal and wall-hung bidets with over-rim supply – Connecting dimensions
EN 360:2002 Personal protective equipment against falls from a height – Retractable type fall arresters
EN 3611:1995 Aerospace series – Spigots – Dimensions and fit selection – Design standard
EN 3612:1996 Aerospace series – Undercuts for splines – Design standard
EN 3613:2009 Aerospace series – Bolts, normal hexagonal head, relieved shank, long thread, in heat
EN 3614:2009 Aerospace series – Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated – Classification: 900 MPa / 650 °C
EN 361:2002 Personal protective equipment against falls from a height – Full body harnesses
EN 3626:2006 Aerospace series – Nuts, hexagon, self-locking in steel, cadmium plated, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature)/235 °C
EN 362:2004 Personal protective equipment against falls from a height – Connectors
EN 3630:2008 Aerospace series – Fluid fittings, flanged, straight – Sealing by O-ring for 0,8 mm thick tubes
EN 3631:2014 Aerospace series – Fluid fittings, flanged, 90° elbowed – Sealing by O-ring for 0,8 mm thick tubes
EN 3633:2008 Aerospace series – Installation hole for fluid fittings, flanged
EN 3635:2014 Aerospace series – Weld lip – Geometrical configuration
EN 3636:2008 Aerospace series – Screws, reduced pan head, offset cruciform recess, relieved shank,
EN 3637:2008 Aerospace series – Nuts, self-locking, bi-hexagonal (double reduced), in heat resisting nickel base alloy – NI-P101HT (Waspaloy), silver plated, Classification: 1210 MPa/730 °C
EN 3638:2007 Aerospace series – Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) – Consumable
EN 363:2018 Personal fall protection equipment – Personal fall protection systems
EN 3642:1996 Aerospace series – Rivets, solid, 100° countersunk normal head with dome, in titanium TIPO2, anodized, inch based series
EN 3643:1996 Aerospace series – Rivets, solid, 100° countersunk normal head, in titanium TI-PO2, anodized, inch based series
EN 3644:1996 Aerospace series – Rivets, solid, universal head, in titanium TI-PO2, anodized, inch based series
EN 3645-001:2019 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-002:2015 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-003:2015 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-004:2019 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-005:2019 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-006:2015 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-007:2015 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-008:2015 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-009:2019 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-010:2019 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-011:2006 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-012:2006 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3645-013:2019 Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded
EN 3646-001:2015 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous – Part 001: Technical specification
EN 3646-002:2007 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating
EN 3646-003:2018 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating
EN 3646-004:2015 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating
EN 3646-005:2017 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating
EN 3646-006:2018 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating
EN 3646-007:2015 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating
EN 3646-008:2006 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous – Part 008: Plug – Product standard
EN 3646-009:2015 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating
EN 3646-010:2015 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating
EN 3646-011:2006 Aerospace series – Connectors, electrical, circular, bayonet coupling, operating
EN 364:1992 Personal protective equipment against falls from a height – Test methods
EN 364:1992/AC:1993 Personal protective equipment against falls from a height – Test methods
EN 3653:2010 Aerospace series – Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel,
EN 3658:2008 Aerospace series – Tube bend radii, for engine application – Design standard
EN 365:2004 Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
EN 365:2004/AC:2006 Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
EN 3660-001:2019 Aerospace series – Cable outlet accessories for circular and rectangular electrical and optical connectors – Part 001: Technical specification
EN 3660-002:2016 Aerospace series – Cable outlet accessories for circular and rectangular electrical and optical connectors – Part 002: Index of product standards
EN 3660-003:2018 Aerospace series – Cable outlet accessories for circular and rectangular electrical and optical connectors – Part 003: Grommet nut, style A – Product standard
EN 3660- 004:2018+AC:2019
EN 3660- 005:2018+AC:2019
EN 3660-006:2010 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-007:2010 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-008:2010 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-009:2007 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-010:2010 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-011:2010 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-012:2008 Aerospace series – Cable outlet accessories for circular and rectangular electrical and optical connectors – Part 012: Grommet nut, style A for EN 3372 – Product standard
EN 3660-013:2008 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-014:2008 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-015:2008 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-016:2009 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3645 – Product standard
EN 3660-017:2009 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-018:2009 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-019:2009 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-020:2009 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-021:2009 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-022:2008 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-023:2008 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-024:2008 Aerospace series – Cable outlet accessories for circular and rectangular electrical and optical connectors – Part 024: Grommet nut, style A, composite – Product standard
EN 3660-025:2013 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-026:2009 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-027:2013 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-031:2017 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-032:2017 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-033:2019 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-034:2017 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-035:2017 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-036:2009 Aerospace series – Cable outlet accessories for circular and rectangular electrical and optical connectors – Part 036: spacer pad for cable outlet, style Z – Product standard
EN 3660-037:2009 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-062:2016 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-063:2015 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-064:2016 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-065:2016 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3660-066:2017 Aerospace series – Cable outlet accessories for circular and rectangular electrical and
EN 3661-001:2006 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A – Part 001: Technical specification
EN 3661-005:2006 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A – Part 005: With polarized signal contact – Product standard
EN 3661-006:2006 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A – Part 006: With polarized signal contact – Bus bar version – Product standard
EN 3662-001:2006 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A – Part 001: Technical specification
EN 3662-005:2006 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A – Part 005: With polarized signal contact – Product standard
EN 3662-006:2006 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A – Part 006: With polarized signal contact – Bus-bar version – Product standard
EN 3663:2001 Aerospace series – Pipe coupling – O-rings in rubber NBR, 75 IRHD, – Temperature range: – 55 °C to + 135 °C
EN 3663:2001/AC:2003 Aerospace series – Pipe coupling – O-rings in rubber NBR, 75 IRHD, Temperature range: – 55 °C to 135 °C
EN 3665:1997 Aerospace series – Test methods for paints and varnishes – Filiform corrosion resistance test on aluminium alloys
EN 3666:2020 Aerospace series – Heat resisting alloy NI-PH2601 – Solution treated and cold worked – Bar for forged fasteners – D ≤ 50 mm – 1 550 MPa ≤ Rm ≤ 1 830 MPa
EN 3668:2006 Aerospace series – Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) – Non heat treated – Forging stock – a or D ≤ 250 mm
EN 3671:2007 Aerospace series – Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) – Non heat treated – Forging stock – a or D ≤ 250 mm
EN 3672:2016 Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT
EN 3676:1998 Aerospace series – Inserts, thin wall, self-locking – Design standard
EN 3677:2007 Aerospace series – Steel FE-PM3801 (X5CrNiCu17-4) – Air melted – Solution treated and precipitation treated – Forgings – a or D ≤ 200 mm – Rm ≥ 1 310 MPa
EN 3678:2007 Aerospace series – Steel FE-PM3801 (X5CrNiCu17-4) – Air melted – Solution treated and precipitation treated – Forgings – a or D ≤ 200 mm – Rm ≥ 930 MPa
EN 3682-001:2013 Aerospace series – Connectors, plug and receptacle, electrical, rectangular,
EN 3682-002:2013 Aerospace series – Connectors, plug and receptacle, electrical, rectangular,
EN 3682-003:2012 Aerospace series – Connectors, plug and receptacle, electrical, rectangular,
EN 3682-004:2012 Aerospace series – Connectors, plug and receptacle, electrical, rectangular,
EN 3682-005:2013 Aerospace series – Connectors, plug and receptacle, electrical, rectangular,
EN 3682-006:2013 Aerospace series – Connectors, plug and receptacle, electrical, rectangular,
EN 3682-007:2013 Aerospace series – Connectors, plug and receptacle, electrical, rectangular,
EN 3682-008:2013 Aerospace series – Connectors, plug and receptacle, electrical, rectangular,
EN 3682-009:2013 Aerospace series – Connectors, plug and receptacle, electrical, rectangular,
EN 3683:2007 Aerospace series – Test methods – Titanium alloy wrought products – Determination of primary α content – Point count method and line intercept method
EN 3684:2007 Aerospace series – Test methods – Titanium alloy wrought products – Determination of β transus temperature – Metallographic method
EN 3685:2019 Aerospace series – Bolts in heat resisting steel FE-PA2601 (A286) – Classification: 1 100 MPa/650 °C – Technical specification
EN 3686:2008 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1 100 MPa/650 °C
EN 3686:2008/AC:2009 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1 100 MPa/650 °C
EN 3687:2010 Aerospace series – Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1 100 MPa/650 °C
EN 3687:2010/AC:2011 Aerospace series – Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated – Classification: 1 100 MPa/650 °C
EN 3688:2001 Aerospace series – T-ring fillers in titanium alloy for welding pipes – 14 000 kPa nominal pressure
EN 3688:2001/AC:2003 Aerospace series – T-ring fillers in titanium alloy for welding pipes – 14 000 kPa nominal pressure
EN 3689:2001 Aerospace series – T-ring fillers in titanium alloy for welding pipes – 28 000 kPa nominal pressure
EN 3689:2001/AC:2003 Aerospace series – T-ring fillers in titanium alloy for welding pipes – 28 000 kPa nominal pressure
EN 3690:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, bulkhead, long
EN 3690:2001/AC:2003 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, bulkhead, long
EN 3691:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, bulkhead, long, welded end
EN 3691:2001/AC:2003 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, bulkhead, long welded end
EN 3696:2001 Aerospace series – Washers in heat resisting steel
EN 3697:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Low temperature resistant – Hardness 60 IRHD
EN 3698:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Low temperature resistant – Hardness 70 IRHD
EN 3706:2012 Aerospace series – Headless threaded plugs, cross recess, in aluminium alloy 5086
EN 3707:2012 Aerospace series – Headless threaded plugs – Installation holes
EN 3708-001:2006 Aerospace series – Modular interconnection systems – Terminal junction systems – Part 001: Technical specification
EN 3708-002:2006 Aerospace series – Modular interconnection systems – Terminal junction systems – Part 002: Performance specification
EN 3708-003:2006 Aerospace series – Modular interconnection systems – Terminal junction systems – Part 003: Removable feedback modules version, sealed – Product standard
EN 3708-004:2006 Aerospace series – Modular interconnection systems – Terminal junction systems – Part 004: Removable feedback modules version, unsealed – Product standard
EN 3708-005:2006 Aerospace series – Modular interconnection systems – Terminal junction systems – Part
EN 3709:2006 Aerospace series – Wrenches and sockets, bi-hexagonal – Technical specification
EN 370:1993 Wood preservatives – Determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer)
EN 3710:2008 Aerospace series – Sockets, bi-hexagonal – Technical Specification
EN 3711:2008 Aerospace series – Wrench-double ended, bi-hexagonal – Straight, cranked, offset
EN 3712:2007 Aerospace series – Nuts, anchor, self-locking, one lug, fixed, reduced series, with
EN 3716-001:2006 Aerospace series – Connector, single-way, with triaxial interface, for transmission of digital data – Part 001: Technical specification
EN 3716-002:2006 Aerospace series – Connectors, single-way with triaxial interface, for transmission of digital data – Part 002: Conditions of use and list of product standards
EN 3716-003:2006 Aerospace series – Connectors, single-way with triaxial interface, for transmission of digital data – Part 003: Solder receptacle – Product standard
EN 3716-004:2014 Aerospace series – Connectors, single-way with triaxial interface for transmission of digital data – Part 004: Solder plug and terminator – Product standard
EN 3716-005:2006 Aerospace series – Connector, single-way with triaxial interface, for transmission of digital data – Part 005: Crimp receptacle – Product standard
EN 3716-006:2006 Aerospace series – Connector, single-way with triaxial interface, for transmission of digital data – Part 006: Crimp plug – Product standard
EN 3717:2008 Aerospace series – Tubes – Selection for engines fluid systems
EN 3718:2012 Aerospace series – Test method for metallic materials – Ultrasonic inspection of tubes
EN 3719:2018 Aerospace series – Aluminium or aluminium alloy conductors for electrical cables – Product standard
EN 3720:1995 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated – Classification: 1 100 MPa (at ambient temperature) / 425 °C
EN 3721:1995 Aerospace series – Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting
EN 3722:1995 Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated – Classification: 1 100 MPa (at ambient temperature) / 425 °C
EN 3723:1996 Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel, FE-PA92HT (A286), MoS2 coated – Classification: 1 100 MPa (at ambient temperature)/425°C
EN 3724:2004 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated – Strength Class: 1 100 MPa (at ambient temperature)
EN 3725:2004 Aerospace series – Screws, pan head, six lobe recess, normal shank, long thread, in
EN 3726:2004 Aerospace series – Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS2 coated – Classification: 1 100 MPa (at ambient temperature) / 425 °C
EN 3727:2006 Aerospace series – Bearings, airframe rolling rigid with flanged alignment housing – Technical specification
EN 3728:2008 Aerospace series – Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FEPA92HT (A286), silver plated
EN 3729:2008 Aerospace series – Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated
EN 3730:2009 Aerospace series – Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning – Dimension, masses
EN 3733-001:2009 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous – Part 001: Technical specification
EN 3733-002:2008 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous – Part 002: List of product standards
EN 3733-003:2008 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-004:2008 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-005:2007 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-006:2008 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-007:2007 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-008:2006 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-009:2006 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-101:2008 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-103:2008 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-104:2008 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-105:2008 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-106:2008 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3733-108:2008 Aerospace series – Connector, optical, circular, single channel, coupled by self-locking
EN 3740:2019 Aerospace series – Bolts, shouldered, thin hexagonal head, close tolerance shank, short
EN 3741:2004 Aerospace series – Nuts, clip, metric – Installation holes and assembly
EN 3745-100:2008 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 100: General
EN 3745-201:2002 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 201: Visual examination
EN 3745-202:2018 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 202: Fibre dimensions
EN 3745-203:2008 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 203: Cable dimensions
EN 3745-205:2002 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 205: Cable longitudinal dimensional stability
EN 3745-301:2012 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 301: Attenuation
EN 3745-302:2002 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 302: Numerical aperture
EN 3745-303:2007 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 303: Bandwidth
EN 3745-305:2002 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 305: Immunity to ambient light coupling
EN 3745-306:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 306: Variation of attenuation during temperature cycling
EN 3745-401:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 401: Accelerated ageing
EN 3745-402:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 402: Temperature cycling
EN 3745-404:2019 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 404: Thermal shock
EN 3745-405:2012 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 405: Low/High temperature bend test
EN 3745-406:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 406: Cold bend test
EN 3745-407:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 407: Flammability
EN 3745-410:2015 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 410: Thermal life
EN 3745-411:2018 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 411: Resistance to fluids
EN 3745-412:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 412: Humidity resistance
EN 3745-501:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 501: Optical fibre proof test
EN 3745-502:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 502: Tensile stength for short length of optical fibres
EN 3745-503:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 503: Scrape abrasion
EN 3745-504:2002 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 504: Micro bending test
EN 3745-505:2018 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 505: Cable tensile strength
EN 3745-506:2018 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 506: Impact resistance
EN 3745-507:2002 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 507: Cutthrough
EN 3745-508:2002 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 508: Torsion
EN 3745-509:2002 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 509: Kink test
EN 3745-510:2017 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 510: Bending test
EN 3745-511:2002 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 511: Cable to cable abrasion
EN 3745-512:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 512: Flexure endurance
EN 3745-513:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 513: Crush resistance
EN 3745-514:2009 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 514: Cable twist bend
EN 3745-515:2012 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 515: Buffer insertion force
EN 3745-516:2017 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 516: Severe cable bend test
EN 3745-517:2017 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 517: Cable tie clamping test
EN 3745-601:2007 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 601: Smoke density
EN 3745-602:2008 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 602: Toxicity
EN 3745-603:2008 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 603: Nuclear radiation
EN 3745-701:2002 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 701: Strippability
EN 3745-703:2005 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 703: Durability of manufacturer’s marking
EN 3745-705:2007 Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 705: Contrast measurement
EN 3746:2007 Aerospace series – O-rings, in fluorosilicone rubber (FVMQ) – Hardness 80 IRHD
EN 3747:2007 Aerospace series – O-rings, in fluorosilicone rubber (FVMQ) – Technical specification
EN 3748:2001 Aerospace series – O-ring grooves – Dimensions
EN 3750:2010 Aerospace series – Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with
EN 3752:2004 Aerospace series – Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601
EN 3753:2010 Aerospace series – Nuts, anchor, self-locking, fixed, 60° corner, with counterbore, in alloy
EN 3757:2009 Aerospace series – Nuts, anchor, self-locking, floating, self-aligning, two lugs, in heat
EN 3759:1996 Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in heat
EN 3760:1996 Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess,
EN 3761:2020 Aerospace series – Heat resisting alloy FE-PA2601 – Softened and cold worked – Bar for forged fasteners – D ≤ 50 mm – 1 100 MPa ≤ Rm ≤ 1 300 MPa
EN 3763:2010 Aerospace series – Nuts, hexagonal, self-locking, ball seat, in heat resisting steel, MoS2 lubricated – Classification: 900 MPa (at ambient temperature) / 315 °C
EN 3768:2012 Aerospace series – Nuts, anchor, self-locking, one lug, fixed, reduced series, with
EN 3769:1997 Aerospace series – Electrolytic polishing of corrosion resisting steels and heat resisting alloys
EN 3773-001:2014 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A – Part 001: Technical specification
EN 3773-003:1999 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated
EN 3773-004:2014 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A – Part 004: UNC thread terminals – Product standard
EN 3773-006:2017 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A – Part 006: 6,3 mm blade terminal – Product standard
EN 3774-001:2014 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A – Part 001: Technical specification
EN 3774-003:1999 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 /n – Part 003: Metric thread terminals – Product standard
EN 3774-004:2014 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A – Part 004: UNC thread terminals – Product standard
EN 3777:2010 Aerospace series – Pins, quick release, single and double acting – Technical specification
EN 377:1993 Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes
EN 377:1993/A1:1996 Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes
EN 378-1:2016 Refrigerating systems and heat pumps – Safety and environmental requirements – Part 1: Basic requirements, definitions, classification and selection criteria
EN 378-2:2016 Refrigerating systems and heat pumps – Safety and environmental requirements – Part 2: Design, construction, testing, marking and documentation
EN 378-3:2016 Refrigerating systems and heat pumps – Safety and environmental requirements – Part 3: Installation site and personal protection
EN 378-4:2016+A1:2019 Refrigerating systems and heat pumps – Safety and environmental requirements – Part 4: Operation, maintenance, repair and recovery
EN 3781:2008 Aerospace series – Grooves for spiral wound retaining rings – Design standard
EN 3782:2008 Aerospace series – Holes for 100° countersunk head screws – Design standard
EN 3783:2013 Aerospace series – Fibre composite materials – Normalisation of fibre dominated mechanical properties
EN 3788:2001 Aerospace series – Pipe coupling 8°30′ – Protective caps
EN 3788:2001/AC:2003 Aerospace series – Pipe coupling 8°30′ – Protective caps
EN 3789:2001 Aerospace series – Pipe coupling 8°30′ – Protective plugs with external threads
EN 3789:2001/AC:2003 Aerospace series – Pipe coupling 8°30′ – Protective plugs with external threads
EN 3790:2001 Aerospace series – Pipe coupling 8°30′ – Protective caps with internal threads
EN 3790:2001/AC:2003 Aerospace series – Pipe coupling 8°30′ – Protective caps with internal threads
EN 379:2003+A1:2009 Personal eye-protection – Automatic welding filters
EN 380:1993 Timber structures – Test methods – General principles for static load testing
EN 3813:2013 Aerospace series – Titanium alloy TI-P64001 (Ti-6Al-4V) – Annealed – Bar and wire for forged fasteners – De ≤ 50 mm
EN 3816:2006 Aerospace series – Steel FE-PA3601 (X6CrNiTi18-10) – Air melted – Softened and cold rolled – Sheet and strip a ≤ 3 mm – Rm ≥ 800 MPa
EN 3818:2019 Aerospace series – Bolts, MJ threads, in titanium alloy TI-P64001 – Strength class: 1 100 MPa (at ambient temperature) – Technical specification
EN 3819:2008 Aerospace series – Clearance for wrenches and sockets
EN 382-1:1993 Fibreboards – Determination of surface absorption – Part 1: Test method for dry process fibreboards
EN 382-2:1993 Fibreboards – Determination of surface absorption – Part 2: Test method for hardboards
EN 3820:2017 Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank,
EN 3825:2014 Aerospace series – Fluorosilicone rubber (FVMQ) – Hardness 60 IRHD
EN 3826:2014 Aerospace series – Fluorosilicone rubber (FVMQ) – Hardness 70 IRHD
EN 3827:2014 Aerospace series – Fluorosilicone rubber (FVMQ) – Hardness 80 IRHD
EN 3831:2004 Aerospace series – Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FEPM3801 (17-4PH), MoS2 coated
EN 3832:2004 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat
EN 3833:2019 Aerospace series – Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601
EN 3834:2010 Aerospace series – Nuts, anchor, self-locking, floating, two lug, incremental counterbore,
EN 3837:2019 Aerospace series – Paints and varnishes – Nature and method for surface preparation of test pieces in aluminium alloys
EN 3838:2010 Aerospace series – Requirements and tests on user-applied markings on aircraft electrical cables
EN 383:2007 Timber Structures – Test methods – Determination of embedment strength and foundation values for dowel type fasteners
EN 3840:2007 Aerospace series – Paints and varnishes – Technical specification
EN 3841-100:2004 Aerospace series – Circuit breakers – Test methods – Part 100: General
EN 3841-201:2004 Aerospace series – Circuit breakers – Test methods – Part 201: Visual inspection
EN 3841-202:2004 Aerospace series – Circuit breakers – Test methods – Part 202: Dimensions and masses
EN 3841-301:2004 Aerospace series – Circuit breakers – Test methods – Part 301: Voltage drop
EN 3841-302:2004 Aerospace series – Circuit breakers – Test methods – Part 302: Insulation resistance
EN 3841-303:2004 Aerospace series – Circuit breakers – Test methods – Part 303: Dielectric strength
EN 3841-304:2004 Aerospace series – Circuit breakers – Test methods – Part 304: Tripping points
EN 3841-305:2004 Aerospace series – Circuit breakers – Test methods – Part 305: Short-circuit performance
EN 3841-306:2004 Aerospace series – Circuit breakers – Test methods – Part 306: Service life
EN 3841-307:2004 Aerospace series – Circuit breakers – Test methods – Part 307: Performance with a locked tripping system
EN 3841-308:2004 Aerospace series – Circuit breakers – Test methods – Part 308: Lightning
EN 3841-401:2004 Aerospace series – Circuit breakers – Test methods – Part 401: Sand and dust
EN 3841-402:2004 Aerospace series – Circuit breakers – Test methods – Part 402: Corrosion
EN 3841-403:2004 Aerospace series – Circuit breakers – Test methods – Part 403: Humidity
EN 3841-404:2004 Aerospace series – Circuit breakers – Test methods – Part 404: Explosion proofness
EN 3841-405:2004 Aerospace series – Circuit breakers – Test methods – Part 405: Fluid resistance
EN 3841-406:2004 Aerospace series – Circuit breakers – Test methods – Part 406: Flammability
EN 3841-407:2004 Aerospace series – Circuit breakers – Test methods – Part 407: Temperature variation
EN 3841-501:2004 Aerospace series – Circuit breakers – Test methods – Part 501: Actuator button travel
EN 3841-502:2004 Aerospace series – Circuit breakers – Test methods – Part 502: Operating forces
EN 3841-503:2004 Aerospace series – Circuit breakers – Test methods – Part 503: Strength of actuating components
EN 3841-504:2004 Aerospace series – Circuit breakers – Test methods – Part 504: Strength of mounting elements
EN 3841-505:2004 Aerospace series – Circuit breakers – Test methods – Part 505: Strength of main terminals
EN 3841-506:2004 Aerospace series – Circuit breakers – Test methods – Part 506: Vibration performance
EN 3841-507:2004 Aerospace series – Circuit breakers – Test methods – Part 507: Mechanical shocks
EN 3841-508:2004 Aerospace series – Circuit breakers – Test methods – Part 508: Centrifugal acceleration
EN 3841-509:2004 Aerospace series – Circuit breakers – Test methods – Part 509: Insertion and extraction forces of signal contact terminals
EN 3841-510:2004 Aerospace series – Circuit breakers – Test methods – Part 510: Strength of signal contact terminals
EN 3841-511:2004 Aerospace series – Circuit breakers – Test methods – Part 511: Combined test: temperature, altitude and vibration
EN 3842:2001 Aerospace series – Circular tubes for fluids in corrosion resistant steel – Diameter 3,2 mm < = D < = 100 mm – Thickness 0,32 mm < = a < = 2,5 mm – Dimensions
EN 3843:2010 Aerospace series – Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated – Classification: 1 100 MPa (at ambient temperature) / 650 °C
EN 3844-1:2019 Aerospace series – Flammability of non-metallic materials – Part 1: Small burner test, vertical – Determination of the vertical flame propagation
EN 3844-2:2019 Aerospace series – Flammability of non-metallic materials – Part 2: Small burner test, horizontal – Determination of the horizontal flame propagation
EN 3844-3:2019 Aerospace series – Flammability of non-metallic materials – Part 3: Small burner test, 45° –
EN 3847:2019 Aerospace series – Paints and varnishes – Determination of sedimentation rating
EN 3848:2001 Aerospace series – Semi-finished metallic products – Methods of measuring form deviations
EN 384:2016+A1:2018 Structural timber – Determination of characteristic values of mechanical properties and density
EN 3851:2003 Aerospace series – Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 – Swivel nuts, straight
EN 3852:2002 Aerospace series – Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 – Straight unions, welded, threaded
EN 3853:2002 Aerospace series – Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 – Straight unions, threaded
EN 3854:2002 Aerospace series – Pipe couplings, 60°, spherical in titanium alloy TI-P64001 – Ferrules, welded
EN 3855:2002 Aerospace series – Pipe couplings, 60°, spherical in titanium alloy TI-P64001 – Caps
EN 3856:2002 Aerospace series – Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 – Swivel nuts for thrust wire
EN 3857:2002 Aerospace series – Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 – Elbows 90°, welded
EN 3858:2002 Aerospace series – Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 – Thrust wires in steel FE-PA 13
EN 3861:2013 Aerospace series – Non-metallic materials – Glass transparencies – Material standard – Thermally tempered soda lime float glass
EN 3862:2013 Aerospace series – Non-metallic materials – Glass transparencies – Material standard – Chemically tempered soda lime float glass
EN 3863:2013 Aerospace series – Non-metallic materials – Glass transparencies – Test methods – Determination of flatness
EN 3864:2013 Aerospace series – Non-metallic materials – Glass transparencies – Test methods – Determination of modulus of rupture
EN 3866:2013 Aerospace series – Non-metallic materials – Glass tranparencies – Test methods – Determination of ream and surface ripple
EN 3867:2004 Aerospace series – Pipe couplings, loose flanges and seals – Flanges in titanium alloy TIP64001
EN 3868:2004 Aerospace series – Pipe couplings, loose flanges and seals – Flange connectors, welded, in titanium alloy TI-P64001
EN 3869:2004 Aerospace series – Pipe couplings, loose flanges and seals – Seals in fluorocarbon rubber and armature in aluminium alloy
EN 3872:2005 Aerospace series – Aluminium alloy AL-R39002-H112 – Die forgings – a <200 mm
EN 3873:2010 Aerospace series – Test methods for metallic materials – Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces
EN 3875:2017 Aerospace series – Metallic materials, Filler metal for brazing – Technical specification
EN 3882:2001 Aerospace series – Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) – Filler metal for welding
EN 3883:2001 Aerospace series – Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) – Filler metal for welding
EN 3884:2001 Aerospace series – Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) – Filler metal for welding
EN 3885:2001 Aerospace series – Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) – Filler metal for welding
EN 3886:2001 Aerospace series – Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) – Filler metal for welding
EN 3887:2001 Aerospace series – Heat resisting alloy CO-WH4101 (CoCr20W15Ni) – Filler metal for welding
EN 3888:2001 Aerospace series – Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) – Filler metal for welding
EN 3889:2001 Aerospace series – Steel FE-WM3801 (X5CrNiCu17-4) – Filler metal for welding
EN 388:2016+A1:2018 Protective gloves against mechanical risks
EN 3890:2001 Aerospace series – Steel FE-WM1502 (X11CrNiMoVN12-3) – Filler metal for welding
EN 3892:2001 Aerospace series – Titanium alloy TI-W64001 – Filler metal for welding
EN 3893:2001 Aerospace series – Titanium alloy TI-W19001 – Filler metal for welding
EN 3894:2001 Aerospace series – Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) – Filler metal for welding
EN 3895:2001 Aerospace series – Heat resisting alloy NI-WH3901 (NiCr16Mo15) – Filler metal for welding
EN 3896:2001 Aerospace series – Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) – Filler metal for welding
EN 3897:2001 Aerospace series – Steel FE-WA4801 (X6CrNiMnNb18-10) – Filler metal for welding
EN 3899:2004 Aerospace series – Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FEPM3801 (17-4PH) – Technical specification
EN 3902:2016 Aerospace series – Washers for rivet assemblies, in aluminium alloy, anodized, metric series
EN 3903:2017 Aerospace series – Washers, laminated, in corrosion resisting steel
EN 3904:2017 Aerospace series – Washers, wire locking in aluminium alloy, anodized
EN 3905:2008 Aerospace series – Six lobe recesses for bolts – Technical specification
EN 3907:2004 Aerospace series – Bolts, double hexagon head, normal shank, long thread, in titanium
EN 3908:2017 Aerospace series – Nipples, lubricating, axial type, in corrosion resisting steel, passivated
EN 3909:2016 Aerospace series – Test fluids and test methods for electrical and optical components and sub-assemblies
EN 3911:2010 Aerospace series – Six lobe recess – Geometrical definition
EN 3912:2007 Aerospace series – Bolts, pan head, six lobe recess, relieved shank, long thread, in heat
EN 3913:2007 Aerospace series – Insert, thin wall, self-locking, short, in heat resisting nickel base alloy
EN 3914:2008 Aerospace series – Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NIPH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of
EN 3915:2008 Aerospace series – Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base
EN 3916:2008 Aerospace series – Insert, thin wall – Salvage procedure for components
EN 3917:1998 Aerospace series – Nickel base alloy NI-B41201 (NiCr14Si5B3C) – Filler metal for brazing – Powder or paste
EN 3918:1998 Aerospace series – Nickel base alloy NI-B41201 (NiCr14Si5B3C) – Filler metal for brazing – Tape
EN 3919:1998 Aerospace series – Nickel base alloy NI-B41202 (NiCr14Si5B3) – Filler metal for brazing – Amorphous foil
EN 3920:2001 Aerospace series – Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) – Filler metal for brazing – Powder or paste
EN 3921:2001 Aerospace series – Nickel base alloy NI-B41203 (NiCr7Si5B3) – Filler metal for brazing – Amorphous foil
EN 3922:1998 Aerospace series – Nickel base alloy Ni-B41203 (NiCr7Si5B3) – Filler metal for brazing – Borided foil
#NAZWA?
EN 3924:1998 Aerospace series – Nickel base alloy NI-B41203 (NiCr7Si5B3) – Filler metal for brazing – Tape
EN 3925:2001 Aerospace series – Nickel base alloy NI-B40001 (NiSi5B3) – Filler metal for brazing – Amorphous foil
EN 3926:2001 Aerospace series – Nickel base alloy NI-B40001 (NiSi5B3) – Filler metal for brazing – Borided foil
EN 3927:2001 Aerospace series – Nickel base alloy NI-B40001 (NiSi5B3) – Filler metal for brazing – Powder or paste
EN 3928:1998 Aerospace series – Nickel base alloy NI-B40001 (NiSi5B3) – Filler metal for brazing – Tape
EN 3930:2001 Aerospace series – Nickel base alloy NI-B31001 (NiCr19Si10) – Filler metal for brazing – Powder or paste
EN 3931:1998 Aerospace series – Nickel base alloy NI-B31001 (NiCr19Si10) – Filler metal for brazing – Tape
EN 3932:2001 Aerospace series – Nickel base alloy NI-B13001 (NiP11) – Filler metal for brazing – Amorphous foil
EN 3933:2001 Aerospace series – Nickel base alloy NI-B13001 (NiP11) – Filler metal for brazing – Powder or paste
EN 3934:2001 Aerospace series – Nickel base alloy NI-B21001 (NiCr15B4) – Filler metal for brazing – Amorphous foil
EN 3935:2001 Aerospace series – Nickel base alloy NI-B21001 (NiCr15B4) – Filler metal for brazing – Borided foil
EN 3936:2001 Aerospace series – Nickel base alloy NI-B21001 (NiCr15B4) – Filler metal for brazing – Powder or paste
EN 3937:2001 Aerospace series – Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) – Filler metal for brazing – Powder or paste
EN 3938:2001 Aerospace series – Nickel base alloy NI-B46001 (NiCo20Si5B3) – Filler metal for brazing – Amorphous foil
EN 3939:2001 Aerospace series – Nickel base alloy NI-B46001 (NiCo20Si5B3) – Filler metal for brazing – Powder or paste
EN 3940:1998 Aerospace series – Nickel base alloy NI-B46001 (NiCoSi5B3) – Filler metal for brazing – Tape
EN 3941:2001 Aerospace series – Nickel base alloy NI-B41204 (NiCr13Si4B3) – Filler metal for brazing – Amorphous foil
EN 3942:2001 Aerospace series – Nickel base alloy NI-B41204 (NiCr13Si4B3) – Filler metal for brazing – Borided foil
EN 3943:2001 Aerospace series – Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) – Filler metal for brazing – Powder or paste
EN 3944:1998 Aerospace series – Nickel base alloy NI-B41204 (NiCr13Si4B3) – Filler metal for brazing – Tape
EN 3945:2001 Aerospace series – Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) – Filler metal for brazing – Powder or paste
EN 3946:2001 Aerospace series – Nickel base alloy NI-B15701 (NiPd34Au30) – Filler metal for brazing – Powder or paste
EN 3947:1998 Aerospace series – Nickel base alloy NI-B15701 (NiPd34Au30) – Filler metal for brazing – Rolled foil
EN 3948:1998 Aerospace series – Nickel base alloy NI-B15701 (NiPd34Au30) – Filler metal for brazing – Wire
EN 3952:2001 Aerospace series – Silver base alloy AG-B10001 (AgCu28) – Filler metal for brazing – Wire
EN 3953:2001 Aerospace series – Silver base alloy AG-B12401 (AgCu40Zn5Ni) – Filler metal for brazing – Wire
EN 3954:2001 Aerospace series – Silver base alloy AG-B12401 (AgCu40Zn5Ni) – Filler metal for brazing – Powder or paste
EN 3955:2001 Aerospace series – Silver base alloy AG-B12401 (AgCu40Zn5Ni) – Filler metal for brazing – Rolled foil
EN 3956:2001 Aerospace series – Silver base alloy AG-B14001 (AgCu42Ni2) – Filler metal for brazing – Wire
EN 3957:2001 Aerospace series – Silver base alloy AG-B14001 (AgCu42Ni2) – Filler metal for brazing – Powder or paste
EN 3958:2001 Aerospace series – Silver base alloy AG-B14001 (AgCu42Ni2) – Filler metal for brazing – Rolled foil
EN 3959:2001 Aerospace series – Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) – Filler metal for brazing – Powder or paste
EN 3960:2001 Aerospace series – Gold base alloy AU-B40001 (AuNi18) – Filler metal for brazing – Powder or paste
EN 3960:2001/AC:2002 Aerospace series – Gold base alloy AU-B40001 (AuNi18) – Filler metal for brazing – Powder or paste
EN 3961:2001 Aerospace series – Gold base alloy AU-B40001 – Filler metal for brazing – Rolled foil
EN 3962:2001 Aerospace series – Gold base alloy AU-B40001 – Filler metal for brazing – Wire
EN 3963:2001 Aerospace series – Copper CU-BU9001 – Filler metal for brazing – Rolled foil
EN 3964:2001 Aerospace series – Copper CU-BU9001 – Filler metal for brazing – Wire
EN 3965:2001 Aerospace series – Titanium alloy TI-B17001 – Filler metal for brazing – Rolled foil
EN 3969:2006 Aerospace series – Steel FE-PL1507 (40CrMoV12) – Air melted – Annealed – Forging stock – a or D ≤ 350 mm
EN 3971:2006 Aerospace series – Steel FE-PL1507 (40CrMoV12) – Consumable electrode remelted – Annealed – Forging stock – a or D ≤ 350 mm
EN 3972:2006 Aerospace series – Steel FE-PL1507 (40CrMoV12) – Consumable electrode remelted –
EN 3973:2006 Aerospace series – Steel FE-CM3801 (X5CrNiCuNb16-4) – Homogenized, solution treated and precipitation hardened – Investment casting – De ≤ 50 mm – Rm ≥ 1 030 MPa
EN 3976:2006 Aerospace series – Titanium and titanium alloys – Test method – Chemical analysis for the determination of hydrogen content
EN 3979:2005 Aerospace series – Aluminium alloy AL-P8090-O2 – Sheet for superplastic forming (SPF) – 0,8 mm < a < 6 mm
EN 397:2012+A1:2012 Industrial safety helmets
EN 3982:2015 Aerospace series – Aluminium alloy AL-P7050 – AlZn6CuMgZr – T7451 – Plates – 6 mm < a ≤ 160 mm
EN 3983:2013 Aerospace series – Aluminium alloy AL-P7050- – T7651 – Plate – 6 mm < a ≤ 160 mm
EN 3987:2009 Aerospace series – Test methods for metallic materials – Constant amplitude forcecontrolled high cycle fatigue testing
EN 3997:2015 Aerospace series – Aluminium alloy AL-P2024- Al Cu4Mg1 – T3 – Sheet and strip – 0,4 mm ≤ a ≤ 6 mm
EN 3998:2007 Aerospace series – Aluminium alloy AL-P2024-T4 or T42 – Sheet and strip 0,3 mm ≤ a ≤ 6 mm
EN 3999:2007 Aerospace series – Aluminium alloy AL-P2024-T351 – Sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm
EN 39:2001 Loose steel tubes for tube and coupler scaffolds – Technical delivery conditions
EN 40-1:1991 Lighting columns – Part 1: Definitions and terms
EN 40-2:2004 Lighting columns – Part 2: General requirements and dimensions
EN 40-3-1:2013 Lighting columns – Part 3-1: Design and verification – Specification for characteristic loads
EN 40-3-2:2013 Lighting columns – Part 3-2: Design and verification – Verification by testing
EN 40-3-3:2013 Lighting columns – Part 3-3: Design and verification – Verification by calculation
EN 40-4:2005 Lighting columns – Part 4: Requirements for reinforced and prestressed concrete lighting columns
EN 40-4:2005/AC:2006 Lighting columns – Part 4: Requirements for reinforced and prestressed concrete lighting columns
EN 40-5:2002 Lighting columns – Part 5: Requirements for steel lighting columns
EN 40-6:2002 Lighting columns – Part 6: Requirements for aluminium lighting columns
EN 40-7:2002 Lighting columns – Part 7: Requirements for fibre reinforced polymer composite lighting columns
EN 4000:2001 Aerospace series – Metallic materials – Rules for the drafting and presentation of dimensional standards for metallic semi-finished products
EN 4001:2007 Aerospace series – Aluminium alloy AL-P2024-T351 – Clad sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm
EN 4002:2007 Aerospace series – Aluminium alloy AL-P2219-T81 – Sheet and strip 0,5 mm ≤ a ≤ 6 mm
EN 4003:2006 Aerospace series – Aluminium alloy AL-P2219-T87 – Sheet and strip 0,5 mm ≤ a ≤ 6 mm
EN 4004:2007 Aerospace series – Aluminium alloy AL-P3103-H16 – Sheet and strip 0,4 mm ≤ a ≤ 6 mm
EN 4005:2007 Aerospace series – Aluminium alloy AL-P5052-O – Sheet and strip 0,3 mm ≤ a ≤ 6 mm
EN 4006:2007 Aerospace series – Aluminium alloy AL-P6082-T4 or T42 – Sheet and strip 0,4 mm ≤ a ≤ 6 mm
EN 4007:2005 Aerospace series – Aluminium alloy AL-P6082-T6 or T62 – Sheet and strip – 0,4 mm <=”” td=””>
EN 4008-001:2006 Aerospace series – Elements of electrical and optical connection – Crimping tools and associated accessories – Part 001: Technical specification
EN 4008-002:2006 Aerospace series – Elements of electrical and optical connection – Crimping tools and associated accessories – Part 002: List of product standards
EN 4008-003:2017 Aerospace series – Elements of electrical and optical connection – Crimping tools and
EN 4008-004:2017 Aerospace series – Elements of electrical and optical connection – Crimping tools and associated accessories – Part 004: Die for crimping tool M22520/5-01 – Product standard
EN 4008-005:2006 Aerospace series – Elements of electrical and optical connection – Crimping tools and
EN 4008-006:2006 Aerospace series – Elements of electrical and optical connection – Crimping tools and
EN 4008-007:2011 Aerospace series – Elements of electrical and optical connection – Crimping tools and
EN 4008-008:2011 Aerospace series – Elements of electrical and optical connection – Crimping tools and
EN 4008-011:2006 Aerospace series – Elements of electrical and optical connection – Crimping tools and
EN 4008-012:2006 Aerospace series – Elements of electrical and optical connection – Crimping tools and
EN 4008-013:2006 Aerospace series – Elements of electrical and optical connection – Crimping tools and
EN 4008-014:2006 Aerospace series – Elements of electrical and optical connection – Crimping tools and
EN 4008-015:2007 Aerospace series – Elements of electrical and optical connection – Crimping tool and
EN 4008-017:2006 Aerospace series – Elements of electrical and optical connection – Crimping tools and
EN 4008-018:2014 Aerospace series – Elements of electrical and optical connection – Crimping tool and
EN 4009:2004 Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length
EN 4011:2004 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated – Classification: 1 550 MPa (at ambient temperature) /
EN 4012:2004 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NIPH2601 (Inconel 718), MoS2 coated – Classification: 1 550 MPa (at ambient temperature)
EN 4013:2004 Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1 550 MPa (at ambient temperature) / 600 °C
EN 4014:2004 Aerospace series – Inserts, thickwall, self-locking – Design standard
EN 4015:2004 Aerospace series – Inserts, thickwall, self-locking – Installation and removal procedure
EN 4017:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 90°
EN 4018:2009 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 90° with thrust wire nut
EN 4019:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 90° welded end
EN 4020:2009 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 90°, welded end with thrust wire nut
EN 4021:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 90°, bulkhead
EN 4022:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 90° bulkhead, welded end
EN 4023:2010 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 45°
EN 4024:2009 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 45° welded end with thrust wire nut
EN 4025:2010 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 45°, bulkhead
EN 4026:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees
EN 4027:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees branch with thrust wire nut
EN 4028:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees with thrust wire nut on run
EN 4029:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees bulkhead branch
EN 402:2003 Respiratory protective devices – Lung governed demand self-contained open-circuit
EN 4030:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees bulkhead on run
EN 4031:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Nut for welded ferrule
EN 4032:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Thrust wire
EN 4032:2001/AC:2003 Aerospace series – Pipe couplings 8°30′ in titanium alloy – Thrust wire
EN 4033:2007 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in corrosion
EN 4034:2007 Aerospace series – Bearings, airframe rolling – Double row self-aligning ball bearings with
EN 4035:2006 Aerospace series – Rod ends, adjustable with self-aligning double row ball bearing in
EN 4036:2006 Aerospace series – Rod ends, adjustable with self-aligning double row ball bearing and
EN 403:2004 Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking
EN 4040:2006 Aerospace series – Bearings, spherical plain in corrosion resisting steel with selflubricating liner with wide inner ring – Elevated loads at ambient temperature – Dimensions
EN 4041:2006 Aerospace series – Bearings, airframe rolling – Rigid single row ball bearings in corrosion
EN 4045:2001 Aerospace series – Capillary tubes, seamless in heat resisting alloys – Diameter 0,6 mm <= D <= 2 mm – Dimensions
EN 4047:2004 Aerospace series – Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated – Classification: 1 550 MPa (at ambient temperature) /
EN 4048:2004 Aerospace series – Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NIPH2601 (Inconel 718), MoS2 coated – Classification: 1 550 MPa (at ambient temperature)
EN 4049-001:2006 Aerospace series – Thermocouple extension cable – Operating tempera-tures between – 65 °C to 260 °C – Part 001: Technical specification
EN 4049-002:2005 Aerospace series – Thermocouple extension cable – Operating temperatures between – 65 °C to 260 °C – Part 002: General
EN 4049-003:2006 Aerospace series – Thermocouple extension cable – Operating tempera-tures between –
EN 4049-004:2006 Aerospace series – Thermocouple extension cable – Operating tempera-tures between –
EN 404:2005 Respiratory protective devices for self-rescue – Filter self-rescuer from carbon monoxide with mouthpiece assembly
EN 4050-1:2012 Aerospace series – Test method for metallic materials – Ultrasonic inspection of bars, plates, forging stock and forgings – Part 1: General requirements
EN 4050-2:2012 Aerospace series – Test method for metallic materials – Ultrasonic inspection of bars, plates, forging stock and forgings – Part 2: Performance of test
EN 4050-3:2012 Aerospace series – Test method for metallic materials – Ultrasonic inspection of bars, plates, forging stock and forgings – Part 3: Reference blocks
EN 4050-4:2012 Aerospace series – Test method for metallic materials – Ultrasonic inspection of bars, plates, forging stock and forgings – Part 4: Acceptance criteria
EN 4051:2002 Aerospace series – Pipe couplings, 60°, spherical, in titanium alloy – Port connection
EN 4054:2004 Aerospace series – Pipe couplings, loose flanges and seals – Seals in fluorocarbon rubber and armature in aluminium alloy – Technical specification
EN 4056-001:2015 Aerospace series – Cable ties for harnesses – Part 001: Technical specification
EN 4056-002:2014 Aerospace series – Cable ties for harnesses – Part 002: Index of product standards
EN 4056-003:2019 Aerospace series – Cable ties for harnesses – Part 003: Plastic cable ties – Operating temperatures – 65 °C to 105 °C and – 65 °C to 150 °C – Product standard
EN 4056-004:2014 Aerospace series – Cable ties for harnesses – Part 004: Plastic cable ties – For operating temperatures – 55 °C to 105 °C and – 55 °C to 150 °C – Product standard
EN 4056-006:2014 Aerospace series – Cable ties for harnesses – Part 006: Peek cable ties – For operating temperatures -55 °C to 240 °C – Product standard
EN 4057-100:2006 Aerospace series – Cable ties for harnesses – Test methods – Part 100: General
EN 4057-201:2005 Aerospace series – Cable ties for harnesses – Test methods – Part 201: Visual examination
EN 4057-202:2005 Aerospace series – Cable ties for harnesses – Test methods – Part 202: Examination of mass and dimensions
EN 4057-301:2005 Aerospace series – Cable ties for harnesses – Test methods – Part 301: Salt mist test
EN 4057-302:2006 Aerospace series – Cable ties for harnesses – Test methods – Part 302: Flammability
EN 4057-303:2005 Aerospace series – Cable ties for harnesses – Test methods – Part 303: Resistance to fluids
EN 4057-304:2006 Aerospace series – Cable ties for harnesses – Test methods – Part 304: Loop tensile strength at maximum working temperature
EN 4057-305:2005 Aerospace series – Cable ties for harnesses – Test methods – Part 305: Colour fastness
EN 4057-306:2006 Aerospace series – Cable ties for harnesses – Test methods – Part 306: Heat ageing test
EN 4057-307:2006 Aerospace series – Cable ties for harnesses – Test methods – Part 307: Resistance to ultra violet radiation
EN 4057-401:2006 Aerospace series – Cable ties for harnesses – Test methods – Part 401: Loop tensile strength
EN 4057-402:2014 Aerospace series – Cable ties for harnesses – Test methods – Part 402: Life cycle
EN 4057-404:2006 Aerospace series – Cable ties for harnesses – Test methods – Part 404: Low temperature installation
EN 4057-405:2005 Aerospace series – Cable ties for harnesses – Test methods – Part 405: Compass safe distance
EN 4057-406:2006 Aerospace series – Cable ties for harnesses – Test methods – Part 406: Locking device retention
EN 4057-407:2005 Aerospace series – Cable ties for harnesses – Test methods – Part 407: Verification of application tool settings
EN 4058:2001 Aerospace series – Filler rods and filler wires for welding in titanium and titanium alloys – Diameter 0,5 mm < = D < = 5,0 mm – Dimensions
EN 4059:2001 Aerospace series – Filler rods and filler wires for welding in steel – Diameter 0,5 mm < D < 5,0 mm – Dimensions
EN 405:2001+A1:2009 Respiratory protective devices – Valved filtering half masks to protect against gases or gases and particles – Requirements, testing, marking
EN 4060:2001 Aerospace series – Filler rods and filler wires for welding in heat resisting alloys – Diameter 0,5 mm < = D < = 5,0 mm – Dimensions
EN 4069:1996 Aerospace series – Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/650°C
EN 4071:2009 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short
EN 4072:2016 Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close
EN 4072:2016/AC:2017 Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close
EN 4073:2016 Aerospace series – Screws, pan head, hexalobular recess, coarse tolerance shank,
EN 4074:2009 Aerospace series – Screws, pan head, six lobe recess, coarse tolerance normal shank,
EN 4075:2008 Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in
EN 4078:2009 Aerospace series – Inserts, threaded, thin wall, locked and self-locking, in heat resisting steel, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature) / 315 °C
EN 407:2020 Protective gloves and other hand protective equipments against thermal risks (heat and/or fire)
EN 4084:2009 Aerospace series – Nuts, anchor, self-locking, fixed, two lug, with counterbore, in alloy
EN 4085:2001 Aerospace series – Nickel base alloy NI-B40002 (NiSi4B2) – Filler metal for brazing – Amorphous foil
EN 408:2010+A1:2012 Timber structures – Structural timber and glued laminated timber – Determination of some physical and mechanical properties
EN 4098:2007 Aerospace series – Steel FE-PL1507 (40CrMoV12) – Remelted, hardened and tempered, forgings De ≤ 50 mm, 1 250 MPa ≤ Rm ≤ 1 400 MPa
EN 4099:2005 Aerospace series – Aluminium alloy AL-P2219-T6 or T62 – Clad sheet and strip – 0,5 mm <=”” td=””>
EN 409:2009 Timber structures – Test methods – Determination of the yield moment of dowel type fasteners
EN 4100:2005 Aerospace series – Aluminium alloy AL-P2219-T6 or T62 – Sheet and strip – 0,5 mm <=”” td=””>
EN 4101:2005 Aerospace series – Aluminium alloy AL-P2024-T4 – Sheet and strip with improved stretch forming capability – 0,4 mm <=”” td=””>
EN 4102:2005 Aerospace series – Aluminium alloy AL-P2219-T81 – Clad sheet and strip – 0,5 mm <=”” td=””>
EN 4103:2001 Aerospace series – Nickel base alloy NI-B40002 (NiSi4B2) – Filler metal for brazing – Borided foil
EN 4104:2001 Aerospace series – Nickel base alloy NI-B40002 – Filler metal for brazing – Powder or paste
EN 4105:1998 Aerospace series – Nickel base alloy NI-B40002 (NiSi4B2) – Filler metal for brazing – Tape
EN 4106:2013 Aerospace series – Non-metallic materials – Structural adhesive systems – Paste adhesive – Technical specification
EN 4108:2006 Aerospace series – Wrenches, crow foot, attachment socket, socket drive
EN 4109:2006 Aerospace series – Wrenches, face spanner
EN 410:2011 Glass in building – Determination of luminous and solar characteristics of glazing
EN 4110:2006 Aerospace series – Wrenches, open end, box
EN 4111:2006 Aerospace series – Wrenches, splined, socket for pipe fittings – Technical specification
EN 4113:2009 Aerospace series – Clamps, loop (”P” type) in corrosion resisting steel, passivated with rubber cushioning – Dimensions, masses
EN 4114:2009 Aerospace series – Clamps, loop (”P” type) in aluminium alloy with rubber cushioning – Dimensions, masses
EN 4115:2010 Aerospace series – Cushion, rubber for clamps – Dimensions, masses
EN 4116:2004 Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601
EN 4117:2004 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated on thread – Classification: 1 550 MPa (at ambient
EN 4118:2004 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601
EN 4119:2004 Aerospace series – Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting
EN 4120:2004 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NIPH1302 (Waspaloy), silver plated on thread – Classification: 1 210 MPa (at ambient
EN 4121:2015 Aerospace series – Shank nuts, serrated, self-locking, in heat resisting steel FE-PA2601
EN 4122:2018 Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread – Classification: 1 100 MPa (at ambient temperature) / 650 °C
EN 4123:2018 Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601
EN 4124:2018 Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302
EN 4125:2010 Aerospace series – Nuts, anchor, self-locking, fixed, two lug, reduced series, with
EN 4126:2010 Aerospace series – Nuts, anchor, self-locking, floating, two lug, reduced series, with
EN 4127:2009 Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, short
EN 4128:2016 Aerospace series – Bolts, normal hexagonal head, coarse tolerance shank, short thread,
EN 4129:2009 Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank,
EN 4129:2009/AC:2010 Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank,
EN 413-1:2011 Masonry cement – Part 1: Composition, specifications and conformity criteria
EN 413-2:2016 Masonry cement – Part 2: Test methods
EN 4130:2009 Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank,
EN 4130:2009/AC:2010 Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank,
EN 4131:2009 Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank,
EN 4131:2009/AC:2010 Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank,
EN 4132:2009 Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, long
EN 4133:2009 Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, long
EN 4134:2009 Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, long
EN 4135:2009 Aerospace series – Bolts, normal bi-hexagonal head, coarse tolerance normal shank,
EN 4136:2009 Aerospace series – Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long
EN 4136:2009/AC:2010 Aerospace series – Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long
EN 4137:2009 Aerospace series – Bolts, normal bi-hexagonal head, stepped shank, long thread, in
EN 4138:2016 Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal
EN 415-10:2014 Safety of packaging machines – Part 10: General Requirements
EN 415-1:2014 Safety of packaging machines – Part 1: Terminology and classification of packaging machines and associated equipment
EN 415-2:1999 Packaging machines safety – Part 2: Pre-formed rigid container packaging machines
EN 415-3:1999+A1:2009 Safety of packaging machines – Part 3: Form, fill and seal machines
EN 415-4:1997 Safety of packaging machines – Part 4: Palletisers and depalletisers
EN 415-4:1997/AC:2002 Safety of packaging machines – Part 4: Palletisers and depalletisers
EN 415-5:2006+A1:2009 Safety of packaging machines – Part 5: Wrapping machines
EN 415-6:2013 Safety of packaging machines – Part 6: Pallet wrapping machines
EN 415-7:2006+A1:2008 Safety of packaging machines – Part 7: Group and secondary packaging machines
EN 415-8:2008 Safety of packaging machines – Part 8: Strapping machines
EN 415-9:2009 Safety of packaging machines – Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
EN 4156:2013 Aerospace series – Rod ends, with self-aligning double row ball bearings and threaded
EN 4158:2006 Aerospace series – Paints and varnishes – Test method for measurement of electrical surface resistance of conductive layers
EN 4159:2011 Aerospace series – Paints and varnishes – Determination of resistance to microbial growth
EN 4160:2011 Aerospace series – Paints and varnishes – Determination of the effect of thermal exposure
EN 4161:2019 Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal
EN 4162:2016 Aerospace series – Screws 100° countersunk normal head, offset cruciform recess,
EN 4162:2016/AC:2017 Aerospace series – Screws 100° countersunk normal head, offset cruciform recess,
EN 4163:2016 Aerospace series – Screws 100° countersunk normal head, offset cruciform recess,
EN 4165-001:2015 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature 175 °C continuous – Part 001: Technical specification
EN 4165- 001:2015/AC:2017
EN 4165-002:2015 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature 175 °C continuous – Part 002: Specification of performance and contact arrangements
EN 4165- 002:2015/AC:2016
EN 4165-003:2016 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature 175 °C continuous – Part 003: Modules series 2 and series 3 – Product standard
EN 4165-004:2007 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-005:2007 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-006:2007 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature 175 °C continuous – Part 006: Plug for 2 and 4 modules, series 2 – Product standard
EN 4165-007:2007 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature 175 °C continuous – Part 007: Plug for 2 and 4 modules, series 3 – Product standard
EN 4165-008:2007 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-009:2007 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-010:2007 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-011:2007 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-012:2005 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-013:2016 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-014:2005 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-015:2015 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-016:2005 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-017:2005 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-018:2015 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-020:2007 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature 175 °C continuous – Part 020: Coupling system keyway for receptacle – Product standard
EN 4165-021:2007 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature 175 °C continuous – Part 021: Coupling system keyway for plug – Product standard
EN 4165-022:2019 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-023:2007 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4165-024:2017 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature 175 °C continuous – Part 024: Single module plug – Product standard
EN 4165-025:2017 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature 175 °C continuous – Part 025: Single module receptacle – Product standard
EN 4165-026:2018 Aerospace series – Connector, electrical, rectangular, modular – Operating temperature 175 °C continuous – Part 026: Accessories for single module connector – Product standard
EN 4165-027:2015 Aerospace series – Connectors, electrical, rectangular, modular – Operating temperature
EN 4166:2004 Aerospace series – Clips, spring tension, three parts – PTFE bushes
EN 4167:2004 Aerospace series – Clips, spring tension, three parts – Inner clips in heat resisting steel FEPA2601 (A286)
EN 4168:2004 Aerospace series – Clips, spring tension, three parts – Outer clips in heat resisting steel FEPA2601 (A286)
EN 416:2019 Gas-fired overhead radiant tube heaters and radiant tube heater systems for nondomestic use – Safety and energy efficiency
EN 4170:2007 Aerospace series – Paints and varnishes – Test method for measurement of resistance to cold crack temperature cycle
EN 4171:2011 Aerospace series – Paints and varnishes – Test method for determination of phosphoric acid index
EN 4172:2006 Aerospace series – Lockbolts, protruding head, sheartype, close tolerance, in titanium
EN 4173:2006 Aerospace series – Lockbolts, 100° countersunk normal head, sheartype, close tolerance,
EN 4174:2006 Aerospace series – Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series
EN 4175:2005 Aerospace series – Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series
EN 4176:2005 Aerospace series – Lockbolts, 100° countersunk normal head or protruding head, tension-
EN 4178:2017 Aerospace series – Screws, pan head, six lobe recess, coarse tolerance normal shank,
EN 4179:2017 Aerospace series – Qualification and approval of personnel for non-destructive testing
EN 417:2012 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances – Construction, inspection, testing and marking
EN 4180:2001 Aerospace series – Circular tubes, for fluids in titanium and titanium alloys – Wide tolerances – Diameter 4 mm < D < 40 mm – Dimensions
EN 4182:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees, reduced
EN 4183:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 90° welded ends
EN 4184:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 45° double, welded ends
EN 4185:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees bulkhead on run long
EN 4186:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, cross
EN 4187:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 90° bulkhead, long
EN 4188:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Elbows 90° bulkhead, long, welded end
EN 4189:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees, bulkhead branch long
EN 4190:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees, reduced with thrust wire nut on run
EN 4191:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees, reduced, bulkhead branch, long
EN 419211-1:2014 Protection profiles for secure signature creation device – Part 1: Overview
EN 419211-2:2013 Protection profiles for secure signature creation device – Part 2: Device with key generation
EN 419211-3:2013 Protection profiles for secure signature creation device – Part 3: Device with key import
EN 419211-4:2013 Protection profiles for secure signature creation device – Part 4: Extension for device with key generation and trusted channel to certificate generation application
EN 419211-5:2013 Protection profiles for secure signature creation device – Part 5: Extension for device with key generation and trusted channel to signature creation application
EN 419211-6:2014 Protection profiles for secure signature creation device – Part 6: Extension for device with key import and trusted channel to signature creation application
EN 419212-1:2017 Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services – Part 1: Introduction and common definitions
EN 419212-2:2017 Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services – Part 2: Signature and Seal Services
EN 419212-3:2017 Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services – Part 3: Device authentication protocols
EN 419212-4:2018 Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services – Part 4: Privacy specific Protocols
EN 419212-5:2018 Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services – Part 5: Trusted eService
EN 419221-5:2018 Protection Profiles for TSP Cryptographic Modules – Part 5: Cryptographic Module for Trust Services
EN 419231:2019 Protection profile for trustworthy systems supporting time stamping
EN 419241-1:2018 Trustworthy Systems Supporting Server Signing – Part 1: General System Security Requirements
EN 419241-2:2019 Trustworthy Systems Supporting Server Signing – Part 2: Protection profile for QSCD for Server Signing
EN 419251-1:2013 Security requirements for device for authentication – Part 1: Protection profile for core functionality
EN 419251-2:2013 Security requirements for device for authentication – Part 2: Protection profile for extension for trusted channel to certificate generation application
EN 419251-3:2013 Security requirements for device for authentication – Part 3: Additional functionality for security targets
EN 4192:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees, reduced bulkhead branch
EN 4193:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees, reduced bulkhead on run long
EN 4194:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Tees, reduced, bulkhead
EN 4195:2011 Aerospace series – Paints and varnishes – Test method for determination of chromate leaching
EN 4198:2006 Aerospace series – Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel – Dimensions and loads
EN 4199-001:2013 Aerospace series – Bonding straps for aircraft – Part 001: Technical specification
EN 4199-002:2006 Aerospace series – Bonding straps for aircraft – Part 002: Index of product standard
EN 4199-003:2014 Aerospace series – Bonding straps for aircraft – Part 003: Bonding strap assemblies with
EN 4199-004:2014 Aerospace series – Bonding straps for aircraft – Part 004: Round bonding straps, copper, tin plated -65 °C up to 150 °C and nickel plated -65 °C up to 260 °C – Product Standard
EN 4199-005:2009 Aerospace series – Bonding straps for aircraft – Part 005: Flat braid conductors copper, tin
EN 4199-006:2006 Aerospace series – Bonding straps for aircraft – Part 006: Round braid copper conductors for bonding straps, tin plated up to 150 °C or nickel plated up to 260 °C – Product standard
EN 419:2019 Gas-fired overhead luminous radiant heaters for non-domestic use – Safety and energy efficiency
EN 4202:2005 Aerospace series – Aluminium alloy AL-P6082-T651 – Plate – 6 mm <=”” td=””>
EN 4203:2005 Aerospace series – Aluminium alloy AL-P8090-T89 – Sheet – 0,6 mm <=”” td=””>
EN 4204:2005 Aerospace series – Aluminium alloy AL-P8090 – T841 – Sheet – 0,6 mm <=”” td=””>
EN 4209:2005 Aerospace series – Aluminium alloy AL-P2219-T851 – Plate – 6 mm <=”” td=””>
EN 4211:2005 Aerospace series – Aluminium alloy AL-P2024-T42 – Clad plate – 6 mm <=”” td=””>
EN 4212:2005 Aerospace series – Aluminium alloy AL-P5086-H111 – Plate – 6 mm <=”” td=””>
EN 4213:2005 Aerospace series – Aluminium alloy AL-P6061-T651 – Plate – 6 mm <=”” td=””>
EN 4214:2005 Aerospace series – Aluminium alloy AL-P7010-T651 – Plate – 6 mm <=”” td=””>
EN 4215:2005 Aerospace series – Aluminium alloy AL-P7175-T651 – Plate – 6 mm <=”” td=””>
EN 4216:2007 Aerospace series – Steel FE-CM3801 (GX5CrNiCuNb16-4) – Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa
EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination
EN 422:2009 Plastics and rubber machines – Blow moulding machines – Safety requirements
EN 4233:2001 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Unions, welded end, threaded
EN 4234:2020 Aerospace series – Clamps, worm drive – Dimensions, masses
EN 4244:2020 Aerospace series – Heat resisting alloy FE-PM1708 – Vacuum arc remelted – Hardened and tempered – Bars – a or D ≤ 200 mm – 1 000 MPa ≤ Rm ≤ 1 140 MPa
EN 4245:2020 Aerospace series – Heat resisting alloy FE-PM1708 – Vacuum arc remelted – As forged – Forging stock – De ≤ 300 mm
EN 4247:2005 Aerospace series – Aluminium alloy AL-P2024-T42 – Plate – 6 mm <=”” td=””>
EN 4250:2001 Aerospace series – Nickel base alloys NI-B41001 (NiCr19Si7B) – Filler metal for brazing – Amorphous foil
EN 4258:1998 Aerospace series – Metallic materials – General organization of standardization – Links between types of EN standards and their use
EN 425:2002 Resilient and laminate floor coverings – Castor chair test
EN 4262:2013 Aerospace series – Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) – As forged – Forging stock – a or D ≤ 200 mm – 690 MPa ≤ Rm ≤ 880MPa
EN 4263:2013 Aerospace series – Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) – As forged – Forging stock – a or D ≤ 200 mm – 690 MPa ≤ Rm ≤ 960MPa
EN 4264:2020 Aerospace series – Heat resisting alloy X4NiCrMoTi43-13 – As forged – Forging stock – a or D ≤ 200 mm
EN 4265:2013 Aerospace series – Bearing spherical plain, metal to metal in corrosion resisting steel – Wide series – Dimensions and loads – Inch series
EN 4266:2013 Aerospace series – Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated – Wide series – Dimensions and loads – Inch series
EN 4267:2001 Aerospace series – Round bars in titanium and titanium alloys – Diameter 6 mm < = D < = 160 mm – Dimensions
EN 4268:2012 Aerospace series – Metallic materials – Heat treatment facilities – General requirements
EN 4283:2005 Aerospace series – Aluminium alloy AL-P2219-T87 – Plate – 6 mm <=”” td=””>
EN 4286:2005 Aerospace series – Aluminium alloy AL-P8090-T89 – Die forgings – a <125 mm
EN 4287:2005 Aerospace series – Aluminium alloy AL-P7010 – Forging stock
EN 4289:2019 Aerospace series – Aluminium alloy AL-P7175- Forging stock
EN 4291:2005 Aerospace series – Aluminium alloy AL-P8090 – Forging stock
EN 4292:2005 Aerospace series – Aluminium alloy AL-R39002 – Forging stock
EN 4293:2014 Aerospace series – Aluminium alloy AL-P7175 – T73511 – Extruded bar and section – a or D ≤ 150 mm
EN 4297:2017 Aerospace series – Nuts, hexagon, self-locking by plastic ring, normal height, normal
EN 4300:2008 Aerospace series – Identification marking of engine items – Design standard
EN 4301:2009 Aerospace series – Identification marking methods for engine items – Engineering requirements
EN 4302:2008 Aerospace series – Open ring insert tool, square drive
EN 4303:2005 Aerospace series – Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
EN 4304:2005 Aerospace series – Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
EN 4306:2005 Aerospace series – Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
EN 4307:2005 Aerospace series – Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
EN 4309:2016 Aerospace series – Nuts, hexagon, self-locking by plastic ring, normal height, normal
EN 4311:2006 Aerospace series – Studs, coarse tolerance reduced shank, medium length threads, in
EN 4312:2006 Aerospace series – Studs, coarse tolerance reduced shank, medium length thread, in heat
EN 4313:2005 Aerospace series – Aluminium alloy AL-P6013-T6 – Sheet and strip – 0,5 mm <=”” td=””>
EN 4314:2007 Aerospace series – Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) – Non heat treated, forging stock a or D ≤ 250 mm
EN 4315:2007 Aerospace series – Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) – Solution treated and precipitation treated, bar and section a or D ≤ 100 mm, Rm ≥ 900 MPa
EN 4317:2007 Aerospace series – Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) – Non heat treated, forging stock a or D ≤ 200 mm
EN 4318:2007 Aerospace series – Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) – Solution treated and precipitation treated, bar and section De ≤ 100 mm, Rm ≥ 960 MPa
EN 4321:2004 Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long
EN 4322:2004 Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long
EN 4323:2004 Aerospace series – Screws, 100° countersunk head, six lobe recess, threaded to head, in
EN 4324:2001 Aerospace series – Aluminium alloy AL-W42201 – Filler metal for welding – Rod
EN 4325:2001 Aerospace series – Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI) – Filler metal for welding – Wire and rod
EN 4326:2001 Aerospace series – Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) – Filler metal for welding – Wire and rod
EN 4327:2001 Aerospace series – Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) – Filler metal for welding – Wire and rod
EN 4328:2002 Aerospace series – Steel FE-WM1601 (X18CrWNi13-3-2) – Filler metal for welding – Wire and rod
EN 4329:2001 Aerospace series – Heat resisting alloy NI-WH0001 (NiCr20) – Filler metal for welding – Wire and rod
EN 432:1994 Resilient floor coverings – Determination of shear force
EN 4330:2002 Aerospace series – Steel FE-WA4802 (X8CrNiMn27-22-2) – Filler metal for welding – Wire and rod
EN 4331:2002 Aerospace series – Steel FE-WL1804 (25CrMnMo4-2-2) – Filler metal for welding – Wire and rod
EN 4332:2002 Aerospace series – Steel FE-WL1805 (8CrMnMo12-4-9) – Filler metal for welding – Wire and rod
EN 4333:2002 Aerospace series – Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) – Filler metal for welding – Wire and rod
EN 4334:2002 Aerospace series – Steel FE-WL1806 (15CrMnMoV5-4-9-3) – Filler metal for welding – Wire and rod
EN 4335:2002 Aerospace series – Steel FE-WA2602 (X4NiCrTiMoV26-15) – Filler metal for welding – Wire and rod
EN 4336:2002 Aerospace series – Steel FE-WA3801 (X4CrNiMn20-10-2) – Filler metal for welding – Wire and rod
EN 4337:2001 Aerospace series – Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn3) – Filler metal for welding – Wire and rod
EN 4338:2001 Aerospace series – Heat resisting alloy NI-WH3902 (NiCr25Mo10C) – Filler metal for welding – Wire and rod
#NAZWA?
EN 4340:2002 Aerospace series – Magnesium alloy MG-W68001 – Filler metal for welding – Wire and rod
EN 4341:2001 Aerospace series – Aluminium alloy AL-W46431 – Filler metal for welding – Wire and rod
EN 4342:2001 Aerospace series – Titanium TI-W99001 – Filler metal for welding – Wire and rod
EN 4343:2002 Aerospace series – Steel FE-WM1001 (X13Cr12) – Filler metal for welding – Wire and rod
EN 4344:2001 Aerospace series – Steel FE-WM1002 (X13Cr13) – Filler metal for welding – Wire and rod
EN 4346:2007 Aerospace series – Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) – Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm
EN 4347:2007 Aerospace series Steel FE-PM1506 (X3CrNiMoAl13-8-2) – Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
EN 4352:2004 Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long
EN 4354:2006 Aerospace series – Six lobe recess – Drivers, relieved
EN 4355:2008 Aerospace series – Six lobe recess – Drivers, socket
EN 4356:2006 Aerospace series – Six lobe recess – Drivers, short
EN 4357:2006 Aerospace series – Six lobe recess – Drivers, handle
EN 4358:2006 Aerospace series – Six lobe recess – Drivers, double ended, 90°
EN 4359:2006 Aerospace series – Six lobe recess – Drivers – Technical specification
EN 4372:2009 Aerospace series – Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) – Wire for solid rivets – D ≤ 10 mm
EN 4373:2007 Aerospace series – Heat resisting alloy NI-PD9001 (NiCu31) – Annealed, seamless tube D ≤ 75 mm, a ≤ 3 mm
EN 4376:2016 Aerospace series – Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated – Bar and section, De ≤ 200 mm
EN 4377:2015 Aerospace series – Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) – Non heat treated – Forging stock – a or D ≤ 300 mm
EN 4379:2007 Aerospace series – Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) – Solution treated, forging De ≤ 200 mm
EN 437:2018 Test gases – Test pressures – Appliance categories
EN 438-1:2016 High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (usually called laminates) – Part 1: Introduction and general information
EN 438-2:2016+A1:2018 High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (usually called laminates) – Part 2: Determination of properties
EN 438-3:2016 High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins
EN 438-4:2016 High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins
EN 438-5:2016 High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins
EN 438-6:2016 High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins
EN 438-7:2005 High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins
EN 438-8:2018 High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (usually called laminates) – Part 8: Classification and specifications for design laminates
EN 438-9:2017 High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins
EN 4382:2006 Aerospace series – Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) – Solution treated – Seamless tubes – For hydraulic application – D ≤ 50 mm, a ≤ 3 mm
EN 4383:2006 Aerospace series – Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) – Non heat treated – Remelting stock
EN 4384:2007 Aerospace series – Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) – Non heat treated – Remelting stock
EN 4396:2008 Aerospace series – Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated
EN 4399:2008 Aerospace series – Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated
EN 4400-1:2019 Aerospace series – Aluminium and aluminium- and magnesium- alloys – Technical specification – Part 1: Aluminium and aluminium alloy plate
EN 4400-2:2019 Aerospace series – Aluminium and aluminium- and magnesium- alloys – Technical specification – Part 2: Aluminium and aluminium alloy sheet and strip
EN 4400-3:2019 Aerospace series – Aluminium and aluminium- and magnesium- alloys – Technical specification – Part 3: Aluminium and aluminium alloy bar and section
EN 4400-6:2019 Aerospace series – Aluminium and aluminium- and magnesium- alloys – Technical specification – Part 6: Aluminium alloy forging stock
EN 4401:2006 Aerospace series – Lockbolts, protruding head, sheartype, close tolerance, in titanium
EN 4402:2006 Aerospace series – Lockbolts, 100° countersunk normal head, sheartype, close tolerance,
EN 4406:2006 Aerospace series – Paints and varnishes – Two component cold curing polyurethane coating – Abrasion resistant
EN 4408-001:2005 Aerospace series – Technical drawings – Representation of parts made of composite materials – Part 1: General rules
EN 4408-002:2005 Aerospace series – Technical drawings – Representation of parts made of composite materials – Part 2: Laminated parts
EN 4408-003:2005 Aerospace series – Technical drawings – Representation of parts made of composite materials – Part 3: Parts including core materials
EN 4408-004:2005 Aerospace series – Technical drawings – Representation of parts made of composite materials – Part 4: Items obtained by winding
EN 4408-005:2005 Aerospace series – Technical drawings – Representation of parts made of composite materials – Part 5: Seams
EN 4408-006:2005 Aerospace series – Technical drawings – Representation of parts made of composite materials – Part 6: Preforms
EN 4415:2006 Aerospace series – Non-metallic materials – Textiles – Narrow woven fabrics – Technical specification
EN 4416:2006 Aerospace series – Non-metallic materials – Textiles – Wide woven fabrics – Technical specification
EN 442-1:2014 Radiators and convectors – Part 1: Technical specifications and requirements
EN 442-2:2014 Radiators and convectors – Part 2: Test methods and rating
EN 4420:2003 Aerospace series – Clips, spring tension, in alloy steel FE-PA3903
EN 4421:2007 Aerospace series – Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel – Strength class: 1 100 MPa (at ambient temperature)
EN 4424:2006 Aerospace series – Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys – Dimensions and loads
EN 4425:2006 Aerospace series – Washers, tab in corrosion resisting steel for flight control rods – Dimensions
EN 4426:2020 Aerospace series – Non-metallic materials – Textiles – Test method – Determination of conductivity and pH of aqueous extracts
EN 4429:2006 Aerospace series – Textiles – Testing of narrow woven fabrics – Determination of warp bow
EN 4434:2005 Aerospace series – Copper or copper alloy lightweight conductors for electrical cables – Product standard (Normal and tight tolerances)
EN 443:2008 Helmets for fire fighting in buildings and other structures
EN 4443:2012 Aerospace series – Nuts, elliptical clinch, self-locking, MJ threads, in heat resisting steel
EN 4449:2005 Aerospace series – Aluminium alloy AL-P7050 – T76 – Sheet – 0,8 mm <=”” td=””>
EN 4450:2005 Aerospace series – Aluminium alloy AL-P7050-T762 – Sheet – 0,8 mm <=”” td=””>
EN 4458:2005 Aerospace series – Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with
EN 4459:2005 Aerospace series – Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel – Design standard
EN 445:2007 Grout for prestressing tendons – Test methods
EN 4460:2005 Aerospace series – Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel – Installation and removal procedure
EN 4461:2007 Aerospace series – Steel FE-PM1506 (X5CrNiMoAl13-8-2) – Vacuum induction melted and
EN 4462:2007 Aerospace series – Steel FE-PM1506 (X5CrNiMoAl13-8-2) – Vacuum induction melted and
EN 4463:2007 Aerospace series – Steel FE-PM1506 (X5CrNiMoAl13-8-2) – Vacuum induction melted and
EN 4464:2007 Aerospace series – Steel FE-PM1506 (X5CrNiMoAl13-8-2) – Vacuum induction melted and
EN 4465:2007 Aerospace series – Steel FE-PM1506 (X5CrNiMoAl13-8-2) – Vacuum induction melted and
EN 4466:2007 Aerospace series – Steel FE-PM1506 (X5CrNiMoAl13-8-2) – Vacuum induction melted and
EN 4467:2007 Aerospace series – Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) – Vacuum induction melted
EN 4468:2007 Aerospace series – Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) – Vacuum induction melted
EN 4469:2007 Aerospace series – Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) – Vacuum induction melted
EN 446:2007 Grout for prestressing tendons – Grouting procedures
EN 4470:2007 Aerospace series – Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) – Vacuum induction melted
EN 4471:2007 Aerospace series – Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) – Vacuum induction melted
EN 4472:2007 Aerospace series – Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) – Vacuum induction melted
EN 4473:2010 Aerospace series – Aluminium pigmented coatings for fasteners – Technical specification
EN 4474:2016 Aerospace series – Aluminium pigmented coatings – Coating methods
EN 4476:2019 Aerospace series – Paints and varnishes – Cold curing intermediate coat
EN 447:2007 Grout for prestressing tendons – Basic requirements
EN 4488:2013 Aerospace series – Non-metallic materials – Anaerobic polymerisable compounds – Threadlocking – Torque strength 2 Nm
EN 448:2019 District heating pipes – Bonded single pipe systems for directly buried hot water networks –
EN 4491:2013 Aerospace series – Non-metallic materials – Anaerobic polymerisable compounds – Threadlocking – Torque strength 16 Nm
EN 4492:2013 Aerospace series – Non-metallic materials – Anaerobic polymerisable compounds – Threadlocking – Torque strength 19 Nm
EN 4493:2008 Aerospace series – Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH1801 (NI-P96HT, Nimonic 90), silver plated
EN 4494:2006 Aerospace series – Rings, split, in stainless steel
EN 4495:2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short
EN 4496:2005 Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close
EN 4496:2005/AC:2006 Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close
EN 4497:2005 Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal
EN 4498:2005 Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium
EN 4499:2009 Aerospace series – Screws, 100° countersunk reduced head, offset cruciform recess,
EN 449:2002+A1:2007 Specification for dedicated liquefied petroleum gas appliances – Domestic flueless space heaters (including diffusive catalytic combustion heaters)
EN 450-1:2012 Fly ash for concrete – Part 1: Definition, specifications and conformity criteria
EN 450-2:2005 Fly ash for concrete – Part 2: Conformity evaluation
EN 4500-001:2012 Aerospace series – Metallic materials – Rules for drafting and presentation of material standards – Part 001: General rules
EN 4500-003:2012 Aerospace series – Metallic materials – Rules for drafting and presentation of material standards – Part 003: Specific rules for heat resisting alloys
EN 4500-004:2012 Aerospace series – Metallic materials – Rules for drafting and presentation of material standards – Part 004: Specific rules for titanium and titanium alloys
EN 4500-005:2012 Aerospace series – Metallic materials – Rules for drafting and presentation of material standards – Part 005: Specific rules for steels
EN 4501:2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short
EN 45020:2006 Standardization and related activities – General vocabulary (ISO/IEC Guide 2:2004)
EN 4503:2013 Aerospace series – Non-metallic materials – Textiles – Test method – Determination of water soluble chloride and sulfate of aqueous extracts
EN 4504:2013 Aerospace series – Non-metallic materials, Textiles – Test method – Determination of flexibility of narrow fabrics
EN 4505:2013 Aerospace series – Non-metallic materials – Textiles – Test method – Determination of dimensional stability
EN 4507:2013 Aerospace series – Non-metallic materials – Textiles – Test method – Determination of water extractable matter
EN 4508:2006 Aerospace series – Paints and varnishes – Test method for anti slip coatings – Determination of the sliding friction behaviour
EN 4509:2006 Aerospace series – Screws, 100 countersunk normal head, offset cruciform recess,
EN 451-1:2017 Method of testing fly ash – Part 1: Determination of free calcium oxide content
EN 451-2:2017 Method of testing fly ash – Part 2: Determination of fineness by wet sieving
EN 4510:2018 Aerospace series – Pipe couplings, 60°, spherical, in titanium alloy TI-P64001, adapters, straight, double end, with locking ring
EN 4526:2013 Aerospace series – Metallic materials – Test methods – Sharp edge-notch tensile testing for sheet and strip
EN 4528:2009 Aerospace series – Steel FE-PA3903 (X10CrNi18-8) – Cold rolled – Strip for springs – a ≤ 3 mm – 1 250 MPa ≤ Rm ≤ 1 640 MPa
EN 4529-001:2006 Aerospace series – Elements of electrical and optical connection – Sealing plugs – Part 001: Technical specification
EN 4529-002:2019 Aerospace series – Elements of electrical and optical connection – Sealing plugs – Part 002: Index of product standards
EN 4529-003:2006 Aerospace series – Elements of electrical and optical connection – Sealing plugs – Part 003: Class T – Product standard
EN 452:1995 Swap bodies – Swap bodies of Class A – Dimensions and general requirements
EN 4530-001:2006 Aerospace series – Sealing sleeves used in elements of connection – Part 001: Technical specification
EN 4530-002:2006 Aerospace series – Sealing sleeves used in elements of connection – Part 002: List and utilization of sealing sleeves
EN 4530-005:2006 Aerospace series – Sealing sleeves used in elements of connection – Part 005: Sealing sleeves for external diameter cable 3 mm to 4,1 mm – Product standard
EN 4530-006:2006 Aerospace series – Sealing sleeves used in elements of connection – Part 006: Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm – Product standard
EN 4531-001:2017 Aerospace series – Connectors, optical, circular, single and multipin, coupled by triple start threaded ring – Flush contacts – Part 001: Technical specification
EN 4531-002:2016 Aerospace series – Connectors, optical, circular, single and multipin, coupled by triple start
EN 4531-003:2012 Aerospace series – Connectors, optical, circular, single and multipin, coupled by triple start threaded ring – Flush contacts – Part 003: Square flange receptacle – Product standard
EN 4531-004:2012 Aerospace series – Connectors, optical, circular, single and multipin, coupled by triple start threaded ring – Flush contacts – Part 004: Jam nut receptacle – Product standard
EN 4531-005:2012 Aerospace series – Connectors, optical, circular, single and multipin, coupled by triple start threaded ring – Flush contacts – Part 005: Plug – Product standard
EN 4531-101:2016 Aerospace series – Connectors, optical, circular, single and multipin, coupled by triple start
EN 4531-201:2016 Aerospace series – Connectors, optical, circular, single and multipin, coupled by triple start
EN 4531-901:2012 Aerospace series – Connectors, optical, circular, single and multipin, coupled by triple start threaded ring – Flush contacts – Part 901: Filler plugs – Product standard
EN 4532:2009 Aerospace series – Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket – Technical specification
EN 4533-001:2020 Aerospace series – Fibre optic systems – Handbook – Part 001: Termination methods and tools
EN 4533-002:2017 Aerospace series – Fibre optic systems – Handbook – Part 002: Test and measurement
EN 4533-003:2017 Aerospace series – Fibre optic systems – Handbook – Part 003: Looming and installation practices
EN 4533-004:2018 Aerospace series – Fibre optic systems – Handbook – Part 004: Repair, maintenance, cleaning and inspection
EN 4534-2:2016 Aerospace series – Bushes, plain in aluminium alloy with self-lubricating liner, elevated load – Part 2: Dimensions and loads – Inch series
EN 4535-2:2016 Aerospace series – Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load – Part 2: Dimensions and loads – Inch series
EN 4536-2:2009 Aerospace series – Bushes, plain in corrosion resisting steel with self-lubricating liner, elevated load – Part 2: Dimensions and loads – Inch series
EN 4537-2:2009 Aerospace series – Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load – Part 2: Dimensions and loads – Inch series
EN 4538-003:2010 Aerospace series – Bearings, spherical plain, in corrosion resisting steel with selflubricating liner elevated load under low oscillations – Narrow series – Dimensions and
EN 4538-2:2014 Aerospace series – Bearings, spherical plain, in corrosion resisting steel with selflubricating liner elevated load under low oscillations – Narrow series – Dimensions and
EN 4539-003:2010 Aerospace series – Bearings, spherical plain, in corrosion resisting steel with selflubricating liner elevated load under low oscillations – Wide series – Dimensions and loads –
EN 4539-2:2019 Aerospace series – Bearing, spherical, plain, in corrosion resisting steel with selflubricating liner – Elevated load under low oscillations – Wide series – Dimensions and
EN 453:2014 Food processing machinery – Dough mixers – Safety and hygiene requirements
EN 4540:2011 Aerospace series – Bearings, spherical plain, in corrosion resisting steel with selflubricating liner elevated load under low oscillations – Technical specification
EN 4549:2014 Aerospace series – Pipe coupling, in heat resisting steel or in heat resisting nickel alloy – Coupling end, welded – Design configuration – Inch series
EN 454:2014 Food processing machinery – Planetary mixers – Safety and hygiene requirements
EN 455-1:2020 Medical gloves for single use – Part 1: Requirements and testing for freedom from holes
EN 455-2:2015 Medical gloves for single use – Part 2: Requirements and testing for physical properties
EN 455-3:2015 Medical gloves for single use – Part 3: Requirements and testing for biological evaluation
EN 455-4:2009 Medical gloves for single use – Part 4: Requirements and testing for shelf life determination
EN 4550-1:2014 Aerospace series – Pipe coupling, 37° – Design configuration – Inch series – Part 1: Male sealing ends, spherical
EN 4550-2:2003 Aerospace series – Pipe coupling, 37° – Design configuration – Inch series – Part 2: Port ends
EN 4550-3:2003 Aerospace series – Pipe coupling, 37° – Design configuration – Inch series – Part 3: Port connections
EN 4550-4:2014 Aerospace series – Pipe coupling, 37° – Design configuration – Inch series – Part 4: Female sealing ends
EN 45501:2015 Metrological aspects of non-automatic weighing instruments
EN 45502-1:2015 Implants for surgery – Active implantable medical devices – Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
EN 45502-2-1:2003 Active implantable medical devices – Part 2-1: Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers)
EN 45502-2-2:2008 Active implantable medical devices – Part 2-2: Particular requirements for active
EN 45502-2- 2:2008/corrigendum Apr.
EN 45502-2-3:2010 Active implantable medical devices – Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems
EN 45510-1:1997 Guide for procurement of power station equipment – Part 1: Common clauses
EN 45510-2-2:1999 Guide for procurement of power station equipment – Part 2-2: Electrical equipment – Uninterruptible power supplies
EN 45510-2-3:2000 Guide for procurement of power station equipment – Part 2-4: Electrical equipment – Stationary batteries and chargers
EN 45510-2-4:2000 Guide for procurement of power station equipment – Part 2-4: Electrical equipment – High power static convertors
EN 45510-2-5:2002 Guide for procurement of power station equipment – Part 2-5: Electrical equipment – Motors
EN 45510-2-6:2000 Guide for procurement of power station equipment – Part 2-6: Electrical equipment – Generators
EN 45510-2-7:2002 Guide for procurement of power station equipment – Part 2-7: Electrical equipment – Switchgear and controlgear
EN 45510-2-8:2004 Guide for procurement of power station equipment – Part 2-8: Electrical equipment – Power cables
EN 45510-2-9:2008 Guide for procurement of power station equipment – Part 2-9: Electrical equipment – Cabling systems
EN 45510-3-1:1999 Guide for procurement of power station equipment – Part 3-1: Boilers – Water tube boilers
EN 45510-3-2:1999 Guide for procurement of power station equipment – Part 3-2: Boilers – Shell boilers
EN 45510-3-3:1999 Guide for procurement of power station equipment – Part 3-3: Boilers – Boilers with fluidized bed firing
EN 45510-4-10:1999 Guide for procurement of power station equipment – Part 4-10: Boiler auxiliaries – Flue gas denitrification (De-NOx) plant
EN 45510-4-1:1999 Guide for procurement of power station equipment – Part 4: Boiler auxiliaries – Section 1: Equipment for reduction of dust emissions
EN 45510-4-2:1999 Guide for procurement of power station equipment – Part 4: Boiler auxiliaries – Section 2: Gas-air, steam-air and gas-gas heaters
EN 45510-4-3:1999 Guide for procurement of power station equipment – Part 4: Boiler auxiliaries – Section 3: Draught plant
EN 45510-4-4:2002 Guide for procurement of power station equipment – Part 4-4: Boiler auxiliaries – Fuel preparation equipment
EN 45510-4-5:2002 Guide for procurement of power station equipment – Part 4-5: Boiler auxiliaries – Coal handling and bulk storage plant
EN 45510-4-6:1999 Guide for procurement of power station equipment – Part 4: Boiler auxiliaries – Section 6: Flue gas desulphurization (De-SOx) plant
EN 45510-4-7:1999 Guide for procurement of power station equipment – Part 4: Boiler auxiliaries – Section 7: Ash handling plant
EN 45510-4-8:1999 Guide for procurement of power station equipment – Part 4-8: Boiler auxiliaries – Dust handling plant
EN 45510-4-9:1999 Guide for procurement of power station equipment – Part 4-9: Boiler auxiliaries – Sootblowers
EN 45510-5-1:1998 Guide for procurement of power station equipment – Part 5-1: Steam turbines
EN 45510-5-2:1998 Guide for procurement of power station equipment – Part 5-2: Gas turbines
EN 45510-5-3:1998 Guide for procurement of power station equipment – Part 5-3: Wind turbines
EN 45510-5-4:1998 Guide for procurement of power station equipment – Part 5-4: Hydraulic turbines, storage pumps and pump-turbines
EN 45510-6-1:1998 Guide for procurement of power station equipment – Part 6-1: Turbine auxiliaries – Deaerators
EN 45510-6-2:1998 Guide for procurement of power station equipment – Part 6-2: Turbine auxiliaries – Feedwater heaters
EN 45510-6-3:1998 Guide for procurement of power station equipment – Part 6-3: Turbine auxiliaries – Condenser plant
EN 45510-6-4:1999 Guide for procurement of power station equipment – Part 6-4: Turbine auxiliaries – Pumps
EN 45510-6-5:1999 Guide for procurement of power station equipment – Part 6-5: Turbine auxiliaries – Dry cooling systems
EN 45510-6-6:1999 Guide for procurement of power station equipment – Part 6-6: Turbine auxiliaries – Wet and wet/dry cooling towers
EN 45510-6-7:1998 Guide for procurement of power station equipment – Part 6-7: Turbine auxiliaries – Moisture separator reheaters
EN 45510-6-8:1999 Guide for procurement of power station equipment – Part 6-8: Turbine auxiliaries – Cranes
EN 45510-6-9:1999 Guide for procurement of power station equipment – Part 6-9: Turbine auxiliaries – Cooling water systems
EN 45510-7-1:1999 Guide for procurement of power station plant, equipment, and systems – Part 7-1: Pipework and valves – High pressure piping systems
EN 45510-7-2:1999 Guide for procurement of power station plant, equipment, and systems – Part 7-2: Pipework and valves – Boiler and high pressure piping valves
EN 45510-8-1:1998 Guide for procurement of power station equipment – Part 8-1: Control and instrumentation
EN 4551:2014 Aerospace series – Pipe coupling, 37°, in heat resisting steel – Swivel nuts – Inch series
EN 4552:2015 Aerospace series – Pipe coupling 37°, spherical, in heat resisting steel – Straight nipples, welded end – Inch series
EN 4553:2003 Aerospace series – Pipe coupling 37°, spherical, in heat resisting steel – Elbow 90° nipples, welded end – Inch series
EN 45544-1:2015 Workplace atmospheres – Electrical apparatus used for the direct detection and direct
EN 45544-2:2015 Workplace atmospheres – Electrical apparatus used for the direct detection and direct
EN 45544-3:2015 Workplace atmospheres – Electrical apparatus used for the direct detection and direct
EN 45544-4:2016 Workplace atmospheres – Electrical apparatus used for the direct detection and direct
EN 45545-1:2013 Railway applications – Fire protection on railway vehicles – Part 1: General
EN 45545-2:2020 Railway applications – Fire protection on railway vehicles – Part 2: Requirements for fire behavior of materials and components
EN 45545-3:2013 Railway applications – Fire protection on railway vehicles – Part 3: Fire resistance requirements for fire barriers
EN 45545-4:2013 Railway applications – Fire protection on railway vehicles – Part 4: Fire safety requirements for rolling stock design
EN 45545-5:2013+A1:2015 Railway applications – Fire protection on railway vehicles – Part 5: Fire safety requirements
EN 45545-6:2013 Railway applications – Fire protection on railway vehicles – Part 6: Fire control and management systems
EN 45545-7:2013 Railway applications – Fire protection on railway vehicles – Part 7: Fire safety requirements for flammable liquid and flammable gas installations
EN 4554:2003 Aerospace series – Pipe coupling 37°, spherical, in heat resisting steel – Straight unions, threaded – Inch series
EN 45552:2020 General method for the assessment of the durability of energy-related products
EN 45553:2020 General method for the assessment of the ability to remanufacture energy-related products
EN 45554:2020 General methods for the assessment of the ability to repair, reuse and upgrade energyrelated products
EN 45555:2019 General methods for assessing the recyclability and recoverability of energy-related products
EN 45556:2019 General method for assessing the proportion of reused components in energy-related products
EN 45557:2020 General method for assessing the proportion of recycled material content in energyrelated products
EN 45558:2019 General method to declare the use of critical raw materials in energy-related products
EN 45559:2019 Methods for providing information relating to material efficiency aspects of energy-related products
EN 4555:2003 Aerospace series – Pipe coupling 37°, in heat resisting steel – Ferrules, welded end – Inch series
EN 4556:2003 Aerospace series – Pipe coupling 37°, in heat resisting steel – Cap assemblies- Inch series
EN 4557:2003 Aerospace series – Pipe coupling 37°, spherical, in heat resisting steel – Tees nipples, welded end – Inch series
EN 4560:2015 Aerospace series – Pipe coupling 37°, spherical up to 21 000 kPa – Inch series – Technical specification
EN 4561:2003 Aerospace series – Pipe coupling, welded, in heat resisting steel – Elbow 90° – Inch series
EN 4562:2003 Aerospace series – Pipe coupling, welded, in heat resisting steel – Reductors – Inch series
EN 4563:2003 Aerospace series – Pipe coupling, welded, in heat resisting steel – Tees – Inch series
EN 4570:2020 Aerospace series – Heat resisting alloy X12CrNiCoMoW21-20 – Solution treated – Forgings – De ≤ 100 mm
EN 4571:2020 Aerospace series – Heat resisting alloy X12CrNiCoMoW21-20 – Solution treated – Bars and sections – De ≤ 100 mm
EN 4572:2020 Aerospace series – Heat resisting alloy X12CrNiCoMoW21-20 – Solution treated – Sheets and strips – a ≤ 3 mm
EN 4573:2020 Aerospace series – Heat resisting alloy X12CrNiCoMoW21-20 – Solution treated and precipitation treated – Bars and sections – De ≤ 100 mm
EN 4574:2020 Aerospace series – Heat resisting alloy X12CrNiCoMoW21-20 – Solution treated and precipitation treated – Forgings – De ≤ 100 mm
EN 4575:2020 Aerospace series – Heat resisting alloy X12CrNiCoMoW21-20 – Solution treated and descaled – Sheets and plates – 3 mm < a ≤ 50 mm
EN 4585:2003 Aerospace series – Clips, spring tension – Technical specification
EN 4588:2007 Aerospace series – Paints and varnishes – Two component, cold curing polyurethane paint, anti slip
EN 458:2016 Hearing protectors – Recommendations for selection, use, care and maintenance – Guidance document
EN 459-1:2015 Building lime – Part 1: Definitions, specifications and conformity criteria
EN 459-2:2010 Building lime – Part 2: Test methods
EN 459-3:2015 Building lime – Part 3: Conformity evaluation
EN 4590:2005 Aerospace series – Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated
EN 4591:2005 Aerospace series – Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS2 lubricated – Classification: 1 550 MPa (at ambient temperature) / 315 °C
EN 4592:2006 Aerospace series – Paints and varnishes – Test method for determination of infrared reflectance
EN 4593:2011 Aerospace series – Paints and varnishes – Determination of solar absorptance
#NAZWA?
#NAZWA?
EN 46-1:2016 Wood preservatives – Determination of the preventive action against recently hatched
EN 46-2:2016 Wood preservatives – Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) – Part 2: Ovicidal effect (laboratory method)
EN 4604-001:2019 Aerospace series – Cable, electrical, for signal transmission – Part 001: Technical specification
EN 4604-002:2009 Aerospace series – Cable, electrical, for signal transmission – Part 002 : General
EN 4604-003:2019 Aerospace series – Cable, electrical, for signal transmission – Part 003: Cable, coaxial, 50 ohms, 200 °C, type WZ – Product standard
EN 4604-004:2007 Aerospace series – Cable, electrical, for signal transmission – Part 004: Cable, microcoaxial, high immunity, 50 Ohms, 200 °C, type WS – Product standard
EN 4604-005:2015 Aerospace series – Cable, electrical, for signal transmission – Part 005: Cable, coaxial, 75 ohmx, 200 °C, type WL – Product standard
EN 4604-006:2019 Aerospace series – Cable, electrical, for signal transmission – Part 006: Cable, coaxial, 50 ohms, 200 °C, type WM – Product standard
EN 4604- 006:2019/AC:2020
EN 4604-007:2019 Aerospace series – Cable, electrical, for signal transmission – Part 007: Cable, coaxial, 50 ohms, 200 °C, type WN – Product standard
EN 4604- 007:2019/AC:2020
EN 4604-008:2009 Aerospace series – Cable, electrical, for signal transmission – Part 008: Cable, coaxial, 50 ohms, 200°C., Type WD – Product standard
EN 4604-009:2017 Aerospace series – Cable, electrical, for signal transmission – Part 009: Cable, coaxial, light weight, 50 ohms, 180 °C, type KW (light WN) – Product standard
EN 4604-010:2018 Aerospace series – Cable, electrical, for signal transmission – Part 010 : Cable, coaxial, light weight, 50 Ohms, 200 °C, type KX (light WD) – Product standard
EN 4608-001:2019 Aerospace series – Cable, electrical, fire resistant – Single and twisted multicore assembly,
EN 4608-002:2006 Aerospace series – Cable, electrical, fire resistant – Single and twisted multicore assembly,
EN 4608-003:2012 Aerospace series – Cable, electrical, fire resistant – Single and twisted multicore assembly,
EN 4608-004:2015 Aerospace series – Cable, electrical, fire resistant – Single and twisted multicore assembly,
EN 4608-005:2012 Aerospace series – Cable, electrical, fire resistant – Single and twisted multicore assembly,
EN 4609:2019 Aerospace series – Spiral drive recesses for threaded fasteners – Geometrical definition and technical requirements
EN 460:1994 Durability of wood and wood-based products – Natural durability of solid wood – Guide to the durability requirements for wood to be used in hazard classes
EN 4610:2005 Aerospace series – Pipe coupling 8° 30′ in titanium alloy – Elbows 45°, with thrust wire nut
EN 4611-002:2018 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly – XLETFE Family – Part 002: General
EN 4611-003:2018 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4611-004:2018 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4611-005:2018 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4611-006:2018 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4611-007:2018 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4611-008:2012 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4611-009:2012 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4612-002:2019 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly – XLETFE Family – Jacketed or screened and jacketed – Part 002: Genera
EN 4612-003:2019 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4612-004:2019 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4612-005:2019 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4612-006:2019 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4612-007:2019 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4612-008:2019 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4612-009:2019 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4612-010:2019 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4612-011:2019 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4612-012:2019 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4612-013:2011 Aerospace series – Cables, electrical, for general purpose, single and multicore assembly –
EN 4613:2009 Aerospace series – Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series – Dimensions and loads – Inch series
EN 4614:2009 Aerospace series – Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series – Dimensions and loads – Inch series
EN 4615:2005 Aerospace series – Magnesium alloy MG-C18002 – T4 – Sand casting
EN 4616:2005 Aerospace series – Magnesium alloy MG-C18002 – T4 – Chill casting
EN 4617:2006 Aerospace series – Recommended practices for standardising company standards
EN 4619:2010 Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys – Installation and removal procedure
EN 461:1999 Specification for dedicated liquefied petroleum gas appliances – Flueless non-domestic space heaters not exceeding 10 kW
EN 461:1999/A1:2004 Specification for dedicated liquefied petroleum gas appliances – Flueless non-domestic space heaters not exceeding 10 kW
EN 4620:2010 Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys – Design standard
EN 4621:2010 Aerospace series – Inserts, MJ threads, self-locking, self-broaching keys – Technical specification
EN 4622:2010 Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated
EN 4623:2010 Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated
EN 4624:2010 Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plate
EN 4626-001:2008 Aerospace series – Connectors, optical, rectangular, multicontact, rack and panel,
EN 4626-002:2008 Aerospace series – Connectors, optical, rectangular, multicontact, rack and panel,
EN 4626-003:2008 Aerospace series – Connectors, optical, rectangular, multicontact, rack and panel,
EN 4626-004:2008 Aerospace series – Connectors, optical, rectangular, multicontact, rack and panel,
EN 4626-101:2008 Aerospace series – Connectors, optical, rectangular, multicontact, rack and panel,
EN 4626-201:2009 Aerospace series – Connectors, optical, rectangular, multicontact, rack and panel,
EN 4626-202:2009 Aerospace series – Connectors, optical, rectangular, multicontact, rack and panel,
EN 4627:2014 Aerospace series – Steel X4CrNiMo16-5-1 (1.4418) – Air melted – Hardened and tempered – Forgings – De ≤ 200 mm – 1 150 MPa ≤ Rm ≤ 1 300 MPa
EN 4628:2013 Aerospace series – Steel X4CrNiMo16-5-1 (1.4418) – Air melted – Hardened and tempered – Bar – De ≤ 200 mm — 1 150 MPa ≤ Rm ≤ 1 300 MPa
EN 4629:2013 Aerospace series – Steel X4CrNiMo16-5-1 (1.4418) – Air melted – Softened – Forging stock – De ≤ 300 mm
EN 4630:2014 Aerospace series – Steel X4CrNiMo16-5-1 (1.4418) – Air melted – Hardened and tempered – Forgings – De ≤ 200 mm – 900 MPa ≤ Rm ≤ 1 050 MPa
EN 4631:2013 Aerospace series – Steel X4CrNiMo16-5-1 (1.4418) – Air melted – Hardened and tempered – Bar – De ≤ 200 mm – 900 MPa ≤ Rm ≤ 1 050 MPa
EN 4632-001:2008 Aerospace series – Welded and brazed assemblies for aerospace constructions – Weldability and brazeability of materials – Part 001: General requirements
EN 4632-002:2008 Aerospace series – Welded and brazed assemblies for aerospace constructions –
EN 4632-003:2010 Aerospace series – Weldability and brazeability of materials in aerospace constructions –
EN 4632-004:2012 Aerospace series – Weldability and brazeability of materials in aerospace constructions – Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
EN 4632-005:2009 Aerospace series – Weldability and brazeability of materials in aerospace constructions – Part 005: Homogeneous assemblies of heat resisting Ni or Co base alloys
EN 4632-006:2013 Aerospace series – Weldability and brazeability of materials in aerospace constructions – Part 006: Homogeneous assemblies of titanium alloys
EN 4634:2009 Aerospace series – Screws, 100° countersunk head, six lobe recess, short thread, in heat
EN 4635:2009 Aerospace series – Screws, 100° countersunk head, six lobes recess, short thread, in heat
EN 4636:2009 Aerospace series – Screws, 100° countersunk head, six lobe recess, short thread, in
EN 4637:2010 Aerospace series – Blast media – White corundum
EN 4638:2010 Aerospace series – Blast media – Brown corundum, without iron
EN 4639-001:2007 Aerospace series – Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder – Part 001: Technical specification
EN 4639-002:2007 Aerospace series – Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder – Part 002: List of product standards
EN 4639-003:2007 Aerospace series – Connectors, optical, rectangular, modular, multicontact, 1,25 diameter
EN 4639-004:2007 Aerospace series – Connectors, optical, rectangular, modular, multicontact, 1,25 diameter
EN 4639-005:2007 Aerospace series – Connectors, optical, rectangular, modular, multicontact, 1,25 diameter
EN 4639-101:2007 Aerospace series – Connectors, optical, rectangular, modular, multicontact, 1,25 diameter
EN 4639-102:2007 Aerospace series – Connectors, optical, rectangular, modular, multicontact, 1,25 diameter
EN 4640-001:2009 Aerospace series – Connectors, optical, rectangular, rack and panel, multicontact, 1,25
EN 4640-002:2009 Aerospace series – Connectors, optical, rectangular, rack and panel, multicontact, 1,25
EN 4640-003:2008 Aerospace series – Connectors, optical, rectangular, rack and panel, multicontact, 1,25
EN 4640-004:2008 Aerospace series – Connectors, optical, rectangular, rack and panel, multicontact, 1,25
EN 4641-001:2018 Aerospace series – Cables, optical, 125 µm diameter cladding – Part 001: Technical specification
EN 4641-100:2015 Aerospace series – Cables, optical 125 μm diameter cladding – Part 100: Tight structure 62,5/125 µm core GI fibre 1,8 mm outside diameter – Product standard
EN 4641-101:2015 Aerospace series – Cables, optical 125 μm diameter cladding – Part 101: Tight structure 62,5 μm core GI fibre 0,9 mm outside diameter – Product standard
EN 4641-102:2009 Aerospace series – Cables, optical 125 μm outside diameter cladding – Part 102: Semiloose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter – Product standard
EN 4641-103:2010 Aerospace series – Cables, optical 125 μm diameter cladding – Part 103: Semi-loose,
EN 4641-104:2010 Aerospace series – Cables, optical 125 μm diameter cladding – Part 104: Semi-loose,
EN 4641-105:2010 Aerospace series – Cables, optical 125 μm diameter cladding – Part 105: Semi-loose,
EN 4641-106:2018 Aerospace series – Cables, optical, 125 µm diameter cladding – Part 106: Semi-loose structure 62,5/125 µm GI fibre nominal 0,9 mm outside diameter – Product standard
EN 4641-200:2018 Aerospace series – Cables, optical, 125 µm diameter cladding – Part 200: Semi-loose structure 9/125 µm GI fibre nominal 0,9 mm outside diameter – Product standard
EN 4641-201:2018 Aerospace series – Cables, optical, 125 µm diameter cladding – Part 201: Semi-loose structure 9/125 µm SM fibre nominal 1,8 mm outside diameter – Product standard
EN 4641-202:2018 Aerospace series – Cables, optical, 125 µm diameter cladding – Part 202: Semi-loose,
EN 4641-301:2011 Aerospace series – Cables, optical 125 μm diameter cladding – Part 301: Tight structure 50/125 µm GI fibre nominal 1,8 mm outside diameter – Product standard
EN 4642:2009 Aerospace series – Steel FE-PM 3504 (X4CrNiMo16-5-1) – Air melted – Hardened and tempered – Sheet and plate – 0,6 mm ≤ a ≤ 50 mm – 900 MPa ≤ Rm ≤ 1 050 MPa
EN 4644-001:2017 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-002:2016 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-003:2016 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-011:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-012:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-013:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-014:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-021:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-022:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-023:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-024:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-025:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-026:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-131:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-133:2016 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-141:2016 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-142:2016 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4644-201:2015 Aerospace series – Connector, electrical and optical, rectangular, modular, rectangular
EN 4645-001:2010 Aerospace series – Connectors, optical, circular, single and multipin, coupled by threaded
EN 4645-002:2009 Aerospace series – Connectors, optical, circular, single and multipin, coupled by threaded
EN 4645-003:2009 Aerospace series – Connectors, optical, circular, single and multipin, coupled by threaded
EN 4645-004:2009 Aerospace series – Connectors, optical, circular, single and multipin, coupled by threaded
EN 4645-005:2009 Aerospace series – Connectors, optical, circular, single and multipin, coupled by threaded
EN 4649:2009 Aerospace series – Handheld fire extinguishers with synthesis gases, for aircraft use – Technical specification and qualification conditions
EN 464:1994 Protective clothing – Protection against liquid and gaseous chemicals, including aerosols
EN 4650:2010 Aerospace series – Wire and cable marking process, UV Laser
EN 4651:2014 Aerospace series – Copper-clad aluminium alloy conductors for electrical cables – Product standard
EN 4652-001:2015 Aerospace series – Connectors, coaxial, radio frequency – Part 001: Technical specification
EN 4652-002:2017 Aerospace series – Connectors, coaxial, radiofrequency – Part 002: Specification of performances
#NAZWA?
#NAZWA?
#NAZWA?
#NAZWA?
#NAZWA?
#NAZWA?
#NAZWA?
#NAZWA?
#NAZWA?
#NAZWA?
EN 4652- 221:2017/AC:2018
#NAZWA?
EN 4652-310:2015 Aerospace series – Connectors, coaxial, radio frequency – Part 310: Type 3, N interface – Clamp nut assembly version – Straight plug – Product standard
EN 4652-311:2015 Aerospace series – Connectors, coaxial, radio frequency – Part 311: Type 3, N interface – Clamp nut assembly version – Right angle plug – Product standard
EN 4652-312:2015 Aerospace series – Connectors, coaxial, radio frequency – Part 312: Type 3, N interface – Clamp nut assembly version – Square flange receptacle – Product standard
EN 4652-313:2015 Aerospace series – Connectors, coaxial, radio frequency – Part 313: Type 3, N interface – Clamp nut assembly version – Bulkhead receptacle – Product standard
EN 4652-320:2017 Aerospace series – Connectors, coaxial, radio frequency – Part 320: Type 3, N interface – Crimp version – Straight plug – Product standard
EN 4652-321:2017 Aerospace series – Connectors, coaxial, radio frequency – Part 321: Type 3, N interface – Crimp assembly version – Right angle plug – Product standard
EN 4652-322:2017 Aerospace series – Connectors, coaxial, radio frequency – Part 322: Type 3, N interface – Crimp version – Square flange receptacle – Product standard
EN 4652-410:2015 Aerospace series – Connectors, coaxial, radio frequency – Part 410: Type 4, C interface – Clamp nut assembly version – Straight plug – Product standard
EN 4652-411:2015 Aerospace series – Connectors, coaxial, radio frequency – Part 411: Type 4, C interface – Clamp nut assembly version – Right angle plug – Product standard
EN 4652-412:2015 Aerospace series – Connectors, coaxial, radio frequency – Part 412: Type 4, C interface – Clamp nut assembly version – Square flange receptacle – Product standard
EN 4652-413:2015 Aerospace series – Connectors, coaxial, radio frequency – Part 413: Type 4, C interface – Clamp nut assembly version – Bulkhead receptacle – Product standard
EN 4652-420:2017 Aerospace series – Connectors, coaxial, radio frequency – Part 420: Type 4, C interface – Crimp assembly version – Straight plug – Product standard
EN 4652-421:2017 Aerospace series – Connectors, coaxial, radio frequency – Part 421: Type 4, C interface – Crimp assembly version – Right angle plug – Product standard
EN 4655:2010 Aerospace series – Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) – Vacuum induction melted
EN 4656:2010 Aerospace series – Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) – Vacuum induction melted
EN 4657:2010 Aerospace series – Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) – Vacuum induction melted
EN 4658:2010 Aerospace series – Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) – Vacuum induction melted
EN 4659:2010 Aerospace series – Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) – Vacuum induction melted
EN 4660-001:2011 Aerospace series – Modular and Open Avionics Architectures – Part 001: Architecture
EN 4660-002:2011 Aerospace series – Modular and Open Avionics Architectures – Part 002: Common Functional Modules
EN 4660-003:2019 Aerospace series – Modular and Open Avionics Architectures – Part 003: Communications/Network
EN 4660-004:2019 Aerospace series – Modular and Open Avionics Architectures – Part 004: Packaging
EN 4660-005:2019 Aerospace series – Modular and Open Avionics Architectures – Part 005: Software
EN 4662:2010 Aerospace series – Test specification for vibration control components
EN 4670:2010 Aerospace series – Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) – Vacuum induction melted and consumable electrode remelted – Softened – Forging stock – a or D ≤ 300 mm
EN 4671:2010 Aerospace series – Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) – Vacuum induction melted
EN 4672:2011 Aerospace series – Steel FE-PM1504 (X1CrNiMoAlTi12-10-2) – Vacuum induction melted and consumable electrode remelted – Softened – Forging stock – a or D ≤ 300 mm
EN 4673-001:2010 Aerospace series – Inserts, UNJ threads, self-locking, with self-broaching keys – Part 001: Installation and removal procedure
EN 4673-002:2010 Aerospace series – Inserts, UNJ threads, self-locking, with self-broaching keys – Part 002: Design standard
EN 4673-003:2010 Aerospace series – Inserts, UNJ threads, self-locking, with self-broaching keys – Part 003: Technical specification
EN 4673-004:2010 Aerospace series – Inserts, UNJ threads, self-locking, with self-broaching keys – Part 004: In heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plating
EN 4673-005:2010 Aerospace series – Inserts, UNJ threads, self-locking, with self-broaching keys – Part 005: In heat resisting nickel base alloy NI-P101HT (WASPALOY), silver plating
EN 4673-006:2010 Aerospace series – Inserts, UNJ threads, self-locking, with self-broaching keys – Part 006: In heat resisting steel FE-PA2601 (A286), MoS2 coated
EN 4674-001:2017 Aerospace series – Electrical cables, installation – Self-wrapping shielding (EMI) protective sleeve – Part 001: Technical specification
EN 4674-002:2015 Aerospace series – Electrical cables, installation – Self-wrapping shielding (EMI) protective sleeve – Part 002: General and list of product standard
EN 4674-003:2017 Aerospace series – Electrical cables, installation – Self-wrapping shielding (EMI) protective
EN 4674-004:2017 Aerospace series – Electrical cables, installation – Self-wrapping shielding (EMI) protective
EN 4675:2011 Aerospace series – Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) – Rm ≥ 1 300 MPa – Bars – De < 110 mm
EN 4677-001:2012 Aerospace series – Welded and brazed assemblies for aerospace construction – Joints of metallic materials by electron beam welding – Part 001: Quality of welded assemblies
EN 4678:2011 Aerospace series – Weldments and brazements for aerospace structures – Joints of metallic materials by laser beam welding – Quality of weldments
EN 4681-001:2019 Aerospace series – Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium – Part 001: Technical specification
EN 4681-002:2012 Aerospace series – Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium – Part 002: General
EN 4681-005:2019 Aerospace series – Cables, electric, general purpose, with conductors in aluminium or
EN 4681-006:2019 Aerospace series – Cables, electric, general purpose, with conductors in aluminium or
EN 4683:2011 Aerospace series – Steel FE-WM 3504 (X4CrNiMo16-5-1) – Air melted – Filler metal for welding – Wire and rod
EN 4685:2011 Aerospace series – Titanium Ti10V2Fe3Al – Bars – D < 110 mm – Rm ≥ 1 240 MPa
EN 4686:2014 Aerospace series – Pipe coupling 8°30′ in titanium alloy – Equipped blind ferrules
EN 4687:2012 Aerospace series – Paints and varnishes – Chromate free non corrosion inhibiting two components cold curing primer for military application
EN 4688:2012 Aerospace series – Paints and varnishes – Corrosion inhibiting two components cold curing primer for military application
EN 4689:2012 Aerospace series – Paints and varnishes – Two components cold curing polyurethane finish – High flexibility and chemical agent resistance for military application
EN 4691-1:2017 Aerospace series – Tie rod with integrated bolts – Part 1: Technical specification
EN 4691-2:2018 Aerospace series – Tie rod with integrated bolts – Part 2: Overview construction kit
EN 4692:2017 Aerospace series – Tie Rod with integrated bolts -Locking clip
EN 4693:2017 Aerospace series – Tie rod with integrated bolts – Assembly code A, B and C
EN 4694:2017 Aerospace series – Tie rod with integrated bolts – Assembly code D, E and F
EN 4695:2017 Aerospace series – Tie Rod with integrated bolts – Assembly Code G, H and K
EN 4697:2016 Aerospace series – General and installation requirements for passenger seat fittings
EN 469:2020 Protective clothing for firefighters – Performance requirements for protective clothing for firefighting activities
EN 4700-001:2010 Aerospace series – Steel and heat resisting alloys – Wrought products – Technical specification – Part 001: Plate, sheet and strip
EN 4700-002:2016 Aerospace series – Steel and heat resisting alloys – Wrought products – Technical specification – Part 002: Bar and section
EN 4700-003:2010 Aerospace series – Steel and heat resisting alloys – Wrought products – Technical specification – Part 003: Tube
EN 4700-004:2010 Aerospace series – Steel and heat resisting alloys – Wrought products – Technical specification – Part 004: Wire
EN 4700-005:2010 Aerospace series – Steel and heat resisting alloys – Wrought products – Technical specification – Part 005: Forging stock
EN 4700-006:2010 Aerospace series – Steel and heat resisting alloys – Wrought products – Technical specification – Part 006: Pre-production and production forgings
EN 4700-007:2010 Aerospace series – Steel and heat resisting alloys – Wrought products – Technical specification – Part 007: Remelting stock
EN 4701-001:2014 Aerospace series – Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts – Part 001: Technical specification
EN 4701-002:2016 Aerospace series – Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts – Part 002: Specification of performance
EN 4701-003:2013 Aerospace series – Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts – Part 003: Module series 2 – Product standard
EN 4702-02:2017 Aerospace series – Quick release fastening systems for non-structural and lining applications – Part 02: Spring clamp stud combination
EN 4702-03:2017 Aerospace series – Quick release fastening systems for non-structural and lining applications – Part 03: Stud – quick-release and locking
EN 4702-04:2017 Aerospace series – Quick release fastening systems for non-structural and lining applications – Part 04: Spring clamp
EN 4702-05:2017 Aerospace series – Quick release fastening systems for non-structural and lining applications – Part 05: Retaining washer
EN 4704:2012 Aerospace series – Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA)
EN 4705:2020 Aerospace series – Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment
EN 4706:2019 Aerospace series – LED colour and brightness ranking
EN 4707:2020 Aerospace series – Acid pickling of aluminium and aluminium alloys without hexavalent chromium
EN 4708-001:2019 Aerospace series – Sleeving, heat-shrinkable, for binding, insulation and identification – Part 001: Technical specification
EN 4708-101:2017 Aerospace series – Sleeving, heat-shrinkable, for binding, insulation and identification –
EN 4708-102:2018 Aerospace series – Sleeving, heat-shrinkable, for binding, insulation and identification –
EN 4708-103:2019 Aerospace series – Sleeving, heat-shrinkable, for binding, insulation and identification –
EN 4708-104:2017 Aerospace series – Sleeving, heat-shrinkable, for binding, insulation and identification –
EN 4708-105:2019 Aerospace series – Sleeving, heat-shrinkable, for binding, insulation and identification –
EN 4708-106:2018 Aerospace series – Sleeving, heat-shrinkable, for binding, insulation and identification –
EN 4708-107:2019 Aerospace series – Sleeving, heat-shrinkable, for binding, insulation and identification –
EN 4708-108:2019 Aerospace series – Sleeving, heat-shrinkable, for binding, insulation and identification –
EN 4708-301:2018 Aerospace series – Sleeving, heat-shrinkable, for binding, insulation and identification –
EN 4710-01:2018 Aerospace series – Quick release fastening systems for non-structural applications – Part 01: Technical specification
EN 4710-02:2015 Aerospace series – Quick release fastening systems for non-structural applications – Part 02: Spring clamp stud combination
EN 4710-03:2018 Aerospace series – Quick release fastening systems for non-structural applications – Part 03: Spring clamp
EN 4710-04:2015 Aerospace series – Quick release fastening systems for non-structural applications – Part 04: Spring clamp – One way tolerance compensation
EN 4710-05:2015 Aerospace series – Quick release fastening systems for non-structural applications – Part 05: Spring clamp – Two ways tolerance compensation
EN 4710-06:2015 Aerospace series – Quick release fastening systems for non-structural applications – Part 06: Stud – quick-release and locking
EN 4710-07:2015 Aerospace series – Quick release fastening systems for non-structural applications – Part 07: Retaining grommet
EN 4720:2014 Aerospace series – Steel X4CrNiMo16-5-1 (1.4418) – Air melted and electroslag remelted (ESR) – Hardened and tempered – Bar – De ≤ 200 mm – 1 150 MPa ≤ Rm ≤ 1 300 MPa
EN 4721:2014 Aerospace series – Steel X4CrNiMo16-5-1 (1.4418) – Air melted and electroslag remelted (ESR) – Hardened and tempered – Bar – De ≤ 200 mm – 900 MPa ≤ Rm ≤ 1 050 MPa
EN 4723:2015 Aerospace series – Standardized measurement methods for comfort and living space criteria for aircraft passenger seats
EN 4725:2014 Aerospace series – Aluminium alloy AL-P2024- Al Cu4Mg1 – T351 – Plate – 6 mm < a ≤ 150 mm
EN 4726:2018+AC:2019 Aerospace series – Acceptance parameters of aesthetical variations for all visible equipment installed in aircraft cabins under all contractual variations
EN 4727:2017 Aerospace series – Standardized passenger seat weight information
EN 4728:2015 Aerospace series – Circuit breakers, single and three poles dummies – Product standard
EN 4729:2017 Aerospace series – Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys
EN 472:1994 Pressure gauges – Vocabulary
EN 4730:2018 Aerospace series – Anthropometric dimensioning of aircraft seats
EN 4731:2018 Aerospace series – Spectral quality of LED luminaires used with photoluminescent marking systems
EN 474-10:2006+A1:2009 Earth-moving machinery – Safety – Part 10: Requirements for trenchers
EN 474-11:2006+A1:2008 Earth-moving machinery – Safety – Part 11: Requirements for earth and landfill compactors
EN 474-12:2006+A1:2008 Earth-moving machinery – Safety – Part 12: Requirements for cable excavators
EN 474- 1:2006+A4:2013/AC:2014 Earth-moving machinery – Safety – Part 1: General requirements
EN 474-1:2006+A6:2019 Earth-moving machinery – Safety – Part 1: General requirements
EN 474-2:2006+A1:2008 Earth-moving machinery – Safety – Part 2: Requirements for tractor-dozers
EN 474-3:2006+A1:2009 Earth-moving machinery – Safety – Part 3: Requirements for loaders
EN 474-4:2006+A2:2012 Earth-moving machinery – Safety – Part 4: Requirements for backhoe loaders
EN 474-5:2006+A3:2013 Earth-moving machinery – Safety – Part 5: Requirements for hydraulic excavators
EN 474-6:2006+A1:2009 Earth-moving machinery – Safety – Part 6: Requirements for dumpers
EN 474-7:2006+A1:2009 Earth-moving machinery – Safety – Part 7: Requirements for scrapers
EN 474-8:2006+A1:2009 Earth-moving machinery – Safety – Part 8: Requirements for graders
EN 474-9:2006+A1:2009 Earth-moving machinery – Safety – Part 9: Requirements for pipelayers
EN 476:2011 General requirements for components used in drains and sewers
EN 477:2018 Plastics – Poly(vinyl chloride) (PVC) based profiles – Determination of the resistance to impact of profiles by falling mass
EN 478:2018 Plastics – Poly(vinyl chloride) (PVC) based profiles – Determination of the appearance after exposure at 150 °C
EN 479:2018 Plastics – Poly(vinyl chloride) (PVC) based profiles – Determination of heat reversion
EN 47:2016 Wood preservatives – Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) – (Laboratory method)
EN 480-10:2009 Admixtures for concrete, mortar and grout – Test methods – Part 10: Determination of water soluble chloride content
EN 480-11:2005 Admixtures for concrete, mortar and grout – Test methods – Part 11: Determination of air void characteristics in hardened concrete
EN 480-12:2005 Admixtures for concrete, mortar and grout – Test methods – Part 12: Determination of the alkali content of admixtures
EN 480-13:2015 Admixtures for concrete, mortar and grout – Test methods – Part 13: Reference masonry mortar for testing mortar admixtures
EN 480-14:2006 Admixtures for concrete, mortar and grout – Test methods – Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
EN 480-15:2013 Admixtures for concrete, mortar and grout – Test methods – Part 15: Reference concrete and method for testing viscosity modifying admixtures
EN 480-1:2014 Admixtures for concrete, mortar and grout – Test methods – Part 1: Reference concrete and reference mortar for testing
EN 480-2:2006 Admixtures for concrete, mortar and grout – Test methods – Part 2: Determination of setting time
EN 480-4:2005 Admixtures for concrete, mortar and grout – Test methods – Part 4: Determination of bleeding of concrete
EN 480-5:2005 Admixtures for concrete, mortar and grout – Test methods – Part 5: Determination of capillary absorption
EN 480-6:2005 Admixtures for concrete, mortar and grout – Test methods – Part 6: Infrared analysis
EN 480-8:2012 Admixtures for concrete, mortar and grout – Test methods – Part 8: Determination of the conventional dry material content
EN 4800-001:2010 Aerospace series – Titanium and titanium alloys – Technical specification – Part 001: Plate, sheet and strip
EN 4800-002:2010 Aerospace series – Titanium and titanium alloys – Technical specification – Part 002: Bar and section
EN 4800-003:2010 Aerospace series – Titanium and titanium alloys – Technical specification – Part 003: Tube
EN 4800-004:2010 Aerospace series – Titanium and titanium alloys – Technical specification – Part 004: Wire
EN 4800-005:2010 Aerospace series – Titanium and titanium alloys – Technical specification – Part 005: Forging stock
EN 4800-006:2010 Aerospace series – Titanium and titanium alloys – Technical specification – Part 006: Preproduction and production forgings
EN 4800-007:2010 Aerospace series – Titanium and titanium alloys – Technical specification – Part 007: Remelting stock
EN 4800-008:2010 Aerospace series – Titanium and titanium alloys – Technical specification – Part 008: Preproduction and production castings
EN 4801:2017 Aerospace series – Flange couplings – Swivel flange with 3 fastening holes, in heat resisting steel – Inch series
EN 4802:2017 Aerospace series – Flange couplings – Swivel flange with 3 fastening holes, in nickel alloy – Inch series
EN 4803:2017 Aerospace series – Flange couplings – Swivel flange with 4 fastening holes, in heat resisting steel – Inch series
EN 4804:2017 Aerospace series – Flange couplings – Swivel flange with 4 fastening holes, in nickel alloy – Inch series
EN 4805:2017 Aerospace series – Flange couplings – Weld coupling, straight, in heat resisting steel – Inch series
EN 4806:2017 Aerospace series – Flange couplings – Weld coupling, straight, in nickel alloy – Inch series
EN 4807:2017 Aerospace series – Flange couplings – Weld coupling, 90° elbow, in heat resisting steel – Inch series
EN 4808:2017 Aerospace series – Flange couplings – Weld coupling, 90° elbow, in nickel alloy – Inch series
EN 4809:2017 Aerospace series – Flange couplings – Gasket seal with fluorocarbon seal on aluminium plate with 3 fastening holes – Inch series
EN 4810:2017 Aerospace series – Flange couplings – Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes – Inch series
EN 4811:2017 Aerospace series – Flange couplings – Gasket seal with fluorocarbon seal on aluminium plate with 4 fastening holes – Inch series
EN 4812:2017 Aerospace series – Flange couplings – Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes – Inch series
EN 4813:2017 Aerospace series – Flange couplings – Cap, in heat resisting steel – Inch series
EN 4814:2017 Aerospace series – Flange couplings up to 21 000 kPa – Technical specification – Inch series
EN 4816:2017 Aerospace series – Flange couplings – Gasket seal with nickel alloy C seal – Technical specification – Inch series
EN 4817:2012 Aerospace series – Passive UHF RFID tags intended for aircraft use
EN 4818:2012 Aerospace series – Passive HF RFID tags intended for aircraft use
EN 4819:2012 Aerospace series – Contact Memory Button (CMB) tags intended for aircraft use
EN 481:1993 Workplace atmospheres – Size fraction definitions for measurement of airborne particles
EN 4826:2014 Aerospace series – Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile
EN 4827:2019 Aerospace series – Hexavalent chromium free anodizing of aluminium and aluminium alloys
EN 482:2012+A1:2015 Workplace exposure – General requirements for the performance of procedures for the measurement of chemical agents
EN 4830-001:2015 Aerospace series – Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts – Part 001: Technical specification
EN 4830-002:2015 Aerospace series – Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts – Part 002: Specification of performance
EN 4830-003:2015 Aerospace series – Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts – Part 003: Module – Product standard
EN 4830-004:2015 Aerospace series – Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts – Part 004: Extraction tool – Product standard
EN 4832:2018 Aerospace series – Adaptor, Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ringlocked fitting and Ring-locked fitting-reducer – Inch Series – Technical specification
EN 4833:2018 Aerospace series – Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting – Flareless End – Inch Series – Extra Fine Thread Pitch
EN 4834:2018 Aerospace series – Adaptor, Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Port for Ring locked fitting – Inch Series – Geometric configuration
EN 4835:2018 Aerospace series – Installation and removal requirements for Ring locked fitting and reducer, 24° Cone up to 35 000 kPa (5 080 psi) – Inch Series
EN 4836:2018 Aerospace series – Adaptor, Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ringlocked fitting – Reducer – Flareless End – Inch Series – Extra Fine Thread Pitch
EN 4838-001:2018 Aerospace series – Arc Fault Circuit breakers, single-pole, temperature compensated,
EN 4838-004:2018 Aerospace series – Arc fault circuit breakers, single-pole, temperature compensated, rated
EN 4838-005:2019 Aerospace series – Arc fault circuit breakers, single-pole, temperature compensated, rated
EN 4839-001:2018 Aerospace series – Arc fault circuit breakers, three-poles, temperature compensated,
EN 4839-003:2018 Aerospace series – Arc Fault Circuit breakers, three-pole, temperature compensated,
EN 4840-001:2018 Aerospace series – Heat shrinkable moulded shapes – Part 001: Technical specification
EN 4840-101:2018 Aerospace series – Heat shrinkable moulded shapes – Part 101: Polyolefin, semi-rigid, limited fire hazard – Temperature range – 30 °C to 105 °C – Product standard
EN 4840-102:2019 Aerospace series – Heat shrinkable moulded shapes – Part 102: Elastomeric, semi-rigid, temperature range -75 to 150 °C – Product Standard
EN 4842:2019 Aerospace series – X5CrNiCu15-5 (1.4545) – Consumable electrode remelted (ESR or
EN 484:2019 Specification for dedicated liquefied petroleum gas appliances – Independent stoves, including those incorporating a grill for outdoor use
EN 484:2019/AC:2020 Specification for dedicated liquefied petroleum gas appliances – Independent stoves, including those incorporating a grill for outdoor use
EN 485-1:2016 Aluminium and aluminium alloys – Sheet, strip and plate – Part 1: Technical conditions for inspection and delivery
EN 485-2:2016+A1:2018 Aluminium and aluminium alloys – Sheet, strip and plate – Part 2: Mechanical properties
EN 485-3:2003 Aluminium and aluminium alloys – Sheet, strip and plate – Part 3: Tolerances on dimensions and form for hot-rolled products
EN 485-4:1993 Aluminium and aluminium alloys – Sheet, strip and plate – Part 4: Tolerances on shape and dimensions for cold-rolled products
EN 4852:2019 Aerospace series – External spiral drive heads for threaded fasteners – Geometrical definition and fastener head wrenching configuration
EN 4854-1:2019 Aerospace series – Bearing, spherical plain, in corrosion resisting steel with self-lubricating
EN 4854-2:2019 Aerospace series – Bearing, spherical plain, in corrosion resisting steel with self-lubricating
EN 4854-3:2019 Aerospace series — Bearing, spherical plain, in corrosion resisting steel with selflubricating liner, low starting torque and low friction coefficient, elevated duty cycles under
EN 4855-01:2020 Aerospace series – ECO efficiency of catering equipment – Part 01: General conditions
EN 4855-02:2020 Aerospace series – ECO efficiency of catering equipment – Part 02: Oven equipment
EN 4855-03:2020 Aerospace series – ECO efficiency of catering equipment – Part 03: Chilling equipment
EN 4855-04:2020 Aerospace series – ECO efficiency of catering equipment – Part 04: Beverage makers
EN 4856:2018 Rotorcraft – Emergency Breathing Systems (EBS) – Requirements, testing and marking
EN 4859:2019 Aerospace series – Sensor based clamp load determination / high tensile bolts – Technical specification
EN 4867:2019 Aerospace series – Laser surface marking by discoloration
EN 4868:2019 Aerospace series – Anodic electrodeposition of hexavalent chromium free primer
EN 486:2009 Aluminium and aluminium alloys – Extrusion ingots – Specifications
EN 4875:2020 Aerospace series – Surface treatments – Test method for measurement of electrical contact resistance
EN 487:2009 Aluminium and aluminium alloys – Rolling ingots – Specifications
EN 488:2019 District heating pipes – Bonded single pipe systems for directly buried hot water networks –
EN 489-1:2019 District heating pipes – Bonded single and twin pipe systems for buried hot water networks
EN 48:2005 Wood preservatives – Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method)
EN 49-1:2016 Wood preservatives – Determination of the protective effectiveness against Anobium
EN 49-2:2015 Wood preservatives – Determination of the protective effectiveness against Anobium
EN 490:2011+A1:2017 Concrete roofing tiles and fittings for roof covering and wall cladding – Product specifications
EN 491:2011 Concrete roofing tiles and fittings for roof covering and wall cladding – Test methods
EN 492:2012+A2:2018 Fibre-cement slates and fittings – Product specification and test methods
EN 494:2012+A1:2015 Fibre-cement profiled sheets and fittings – Product specification and test methods
EN 495-5:2013 Flexible sheets for waterproofing – Determination of foldability at low temperature – Part 5: Plastic and rubber sheets for roof waterproofing
EN 497:1997 Specification for dedicated liquefied petroleum gas appliances – Multi purpose boiling burners for outdoor use
EN 498:2012 Specification for dedicated liquefied petroleum gas appliances – Barbecues for outdoor use contact grills included
EN 500-1:2006+A1:2009 Mobile road construction machinery – Safety – Part 1: Common requirements
EN 500-2:2006+A1:2008 Mobile road construction machinery – Safety – Part 2: Specific requirements for roadmilling machines
EN 500-3:2006+A1:2008 Mobile road construction machinery – Safety – Part 3: Specific requirements for soilstabilising machines and recycling machines
EN 500-4:2011 Mobile road construction machinery – Safety – Part 4: Specific requirements for compaction machines
EN 500-6:2006+A1:2008 Mobile road construction machinery – Safety – Part 6: Specific requirements for paverfinishers
EN 501:1994 Roofing products from metal sheet – Specification for fully supported roofing products of zinc sheet
EN 502:2013 Roofing products from metal sheet – Specification for fully supported roofing products of stainless steel sheet
EN 50465:2015 Gas appliances – Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
EN 50465:2015/A1:2019 Gas appliances – Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
EN 504:1999 Roofing products from metal sheet – Specification for fully supported roofing products of copper sheet
EN 505:2013 Roofing products from metal sheet – Specification for fully supported roofing products of steel sheet
EN 506:2008 Roofing products of metal sheet – Specification for self-supporting products of copper or zinc sheet
EN 507:2019 Roofing and cladding products from metal sheet – Specification for fully supported products of aluminium sheet
EN 508-1:2014 Roofing and cladding products from metal sheet – Specification for self-supporting of steel, aluminium or stainless steel sheet – Part 1: Steel
EN 508-2:2019 Roofing and cladding products from metal sheet – Specification for self-supporting products of steel, aluminium or stainless steel sheet – Part 2: Aluminium
EN 508-3:2008 Roofing products from metal sheet – Specification for self-supporting products of steel, aluminium or stainless steel sheet – Part 3: Stainless steel
EN 509:1999 Decorative fuel-effect gas appliances
EN 509:1999/A1:2003 Decorative fuel-effect gas appliances
EN 509:1999/A2:2004 Decorative fuel-effect gas appliances
EN 510:2019 Specification for protective clothing for use where there is a risk of entanglement with moving parts
EN 511:2006 Protective gloves against cold
EN 512:1994 Fibre-cement products – Pressure pipes and joints
EN 512:1994/A1:2001 Fibre-cement products – Pressure pipes and joints
EN 513:2018 Plastics – Poly(vinyl chloride) (PVC) based profiles – Determination of the resistance to artificial weathering
EN 514:2018 Plastics – Poly(vinyl chloride) (PVC) based profiles – Determination of the strength of welded corners and T-joints
EN 515:2017 Aluminium and aluminium alloys – Wrought products – Temper designations
EN 516:2006 Prefabricated accessories for roofing – Installations for roof access – Walkways, treads and steps
EN 517:2006 Prefabricated accessories for roofing – Roof safety hooks
EN 520:2004+A1:2009 Gypsum plasterboards – Definitions, requirements and test methods
EN 521:2019+AC:2019 Specifications for dedicated liquefied petroleum gas appliances – Portable vapour pressure liquefied petroleum gas appliances
EN 523:2003 Steel strip sheaths for prestressing tendons – Terminology, requirements, quality control
EN 524-1:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 1: Determination of shape and dimensions
EN 524-2:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 2: Determination of flexural behaviour
EN 524-3:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 3: To-and-fro bending test
EN 524-4:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 4: Determination of lateral load resistance
EN 524-5:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 5: Determination of tensile load resistance
EN 524-6:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 6: Determination of leaktightness (Determination of water loss)
EN 526:1993 Inland navigation vessels – Gangway with a length not exceeding 8 m – Requirements, types
EN 527-1:2011 Office furniture – Work tables and desks – Part 1: Dimensions
EN 527-2:2016+A1:2019 Office furniture – Work tables – Part 2: Safety, strength and durability requirements
EN 528:2008 Rail dependent storage and retrieval equipment – Safety requirements
EN 529:2005 Respiratory protective devices – Recommendations for selection, use, care and maintenance – Guidance document
EN 530:2010 Abrasion resistance of protective clothing material – Test methods
EN 534:2006+A1:2010 Corrugated bitumen sheets – Product specification and test methods
EN 536:2015 Road construction machines – Mixing plants for road construction materials – Safety requirements
EN 538:1994 Clay roofing tiles for discontinuous laying – Flexural strength test
EN 539-1:2005 Clay roofing tiles for discontinuous laying – Determination of physical characteristics – Part 1: Impermeability test
EN 539-2:2013 Clay roofing tiles for discontinuous laying – Determination of physical characteristics – Part 2: Test for frost resistance
EN 54-10:2002 Fire detection and fire alarm systems – Part 10: Flame detectors – Point detectors
EN 54-10:2002/A1:2005 Fire detection and fire alarm systems – Part 10: Flame detectors – Point detectors
EN 54-11:2001 Fire detection and fire alarm systems – Part 11: Manual call points
EN 54-11:2001/A1:2005 Fire detection and fire alarm systems – Part 11: Manual call points
EN 54-12:2015 Fire detection and fire alarm systems – Part 12: Smoke detectors – Line detectors using an optical beam
EN 54-13:2017+A1:2019 Fire detection and fire alarm systems – Part 13: Compatibility and connectability assessment of system components
EN 54-16:2008 Fire detection and fire alarm systems – Part 16: Voice alarm control and indicating equipment
EN 54-17:2005 Fire detection and fire alarm systems – Part 17: Short-circuit isolators
EN 54-17:2005/AC:2007 Fire detection and fire alarm systems – Part 17: Short-circuit isolators
EN 54-18:2005 Fire detection and fire alarm systems – Part 18: Input/output devices
EN 54-18:2005/AC:2007 Fire detection and fire alarm systems – Part 18: Input/output devices
EN 54-1:2011 Fire detection and fire alarm systems – Part 1: Introduction
EN 54-20:2006 Fire detection and fire alarm systems – Part 20: Aspirating smoke detectors
EN 54-20:2006/AC:2008 Fire detection and fire alarm systems – Part 20: Aspirating smoke detectors
EN 54-21:2006 Fire detection and fire alarm systems – Part 21: Alarm transmission and fault warning routing equipment
EN 54-22:2015+A1:2020 Fire detection and fire alarm systems – Part 22: Resettable line-type heat detectors
EN 54-23:2010 Fire detection and fire alarm systems – Part 23: Fire alarm devices – Visual alarm devices
EN 54-24:2008 Fire detection and fire alarm systems – Part 24: Components of voice alarm systems – Loudspeakers
EN 54-25:2008 Fire detection and fire alarm systems – Part 25: Components using radio links
EN 54-25:2008/AC:2012 Fire detection and fire alarm systems – Part 25: Components using radio links
EN 54-26:2015 Fire detection and fire alarm systems – Part 26: Carbon monoxide detectors – Point detectors
EN 54-27:2015 Fire detection and fire alarms systems – Part 27: Duct smoke detectors
EN 54-28:2016 Fire detection and fire alarm system – Part 28: Non-resettable line-type heat detectors
EN 54-29:2015 Fire detection and fire alarm systems – Part 29: Multi-sensor fire detectors – Point detectors using a combination of smoke and heat sensors
EN 54-2:1997 Fire detection and fire alarm systems – Part 2: Control and indicating equipment
EN 54-2:1997/A1:2006 Fire detection and fire alarm systems – Part 2: Control and indicating equipment
EN 54-2:1997/AC:1999 Fire detection and fire alarm systems – Part 2: Control and indicating equipment
EN 54-30:2015 Fire detection and fire alarm systems – Part 30: Multi-sensor fire detectors – Point detectors using a combination of carbon monoxide and heat sensors
EN 54-31:2014+A1:2016 Fire detection and fire alarm systems – Part 31: Multi-sensor fire detectors – Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors
EN 54-3:2014+A1:2019 Fire detection and fire alarm systems – Part 3: Fire alarm devices – Sounders
EN 54-4:1997 Fire detection and fire alarm systems – Part 4: Power supply equipment
EN 54-4:1997/A1:2002 Fire detection and fire alarm systems – Part 4: Power supply equipment
EN 54-4:1997/A2:2006 Fire detection and fire alarm systems – Part 4: Power supply equipment
EN 54-4:1997/AC:1999 Fire detection and fire alarm systems – Part 4: Power supply equipment
EN 54-5:2017+A1:2018 Fire detection and fire alarm systems – Part 5: Heat detectors – Point heat detectors
EN 54-7:2018 Fire detection and fire alarm systems – Part 7: Smoke detectors – Point smoke detectors that operate using scattered light, transmitted light or ionization
EN 541:2006 Aluminium and aluminium alloys – Rolled products for cans, closures and lids – Specifications
EN 542:2003 Adhesives – Determination of density
EN 543:2003 Adhesives – Determination of apparent density of powder and granule adhesives
EN 544:2011 Bitumen shingles with mineral and/or synthetic reinforcements – Product specification and test methods
EN 545:2010 Ductile iron pipes, fittings, accessories and their joints for water pipelines – Requirements and test methods
EN 546-1:2006 Aluminium and aluminium alloys – Foil – Part 1: Technical conditions for inspection and delivery
EN 546-2:2006 Aluminium and aluminium alloys – Foil – Part 2: Mechanical properties
EN 546-3:2006 Aluminium and aluminium alloys – Foil – Part 3: Tolerances on dimensions
EN 546-4:2006 Aluminium and aluminium alloys – Foil – Part 4: Special property requirements
EN 547-1:1996+A1:2008 Safety of machinery – Human body measurements – Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
EN 547-2:1996+A1:2008 Safety of machinery – Human body measurements – Part 2: Principles for determining the dimensions required for access openings
EN 547-3:1996+A1:2008 Safety of machinery – Human body measurements – Part 3: Anthropometric data
EN 549:2019 Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 556-1:2001 Sterilization of medical devices – Requirements for medical devices to be designated STERILE – Part 1: Requirements for terminally sterilized medical devices
EN 556-1:2001/AC:2006 Sterilization of medical devices – Requirements for medical devices to be designated ‘STERILE’ – Part 1: Requirements for terminally sterilized medical devices
EN 556-2:2015 Sterilization of medical devices – Requirements for medical devices to be designated ”STERILE” – Part 2: Requirements for aseptically processed medical devices
EN 558:2017 Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems – PN and Class designated valves
EN 560:2018 Gas welding equipment – Hose connections for equipment for welding, cutting and allied processes
EN 561:2002 Gas welding equipment – Quick-action coupling with shut-off valves for welding, cutting and allied processes
EN 564:2014 Mountaineering equipment – Accessory cord – Safety requirements and test methods
EN 565:2017 Mountaineering equipment – Tape – Safety requirements and test methods
EN 566:2017 Mountaineering equipment – Slings – Safety requirements and test methods
EN 567:2013 Mountaineering equipment – Rope clamps – Safety requirements and test methods
EN 568:2015 Mountaineering equipment – Ice anchors – Safety requirements and test methods
EN 569:2007 Mountaineering equipment – Pitons – Safety requirements and test methods
EN 570:2007 Aluminium and aluminium alloys – Impact extrusion slugs obtained from wrought products – Specification
EN 572-1:2012+A1:2016 Glass in building – Basic soda-lime silicate glass products – Part 1: Definitions and general physical and mechanical properties
EN 572-2:2012 Glass in building – Basic soda lime silicate glass products – Part 2: Float glass
EN 572-3:2012 Glass in building – Basic soda lime silicate glass products – Part 3: Polished wired glass
EN 572-4:2012 Glass in building – Basic soda lime silicate glass products – Part 4: Drawn sheet glass
EN 572-5:2012 Glass in building – Basic soda lime silicate glass products – Part 5: Patterned glass
EN 572-6:2012 Glass in building – Basic soda lime silicate glass products – Part 6: Wired patterned glass
EN 572-7:2012 Glass in building – Basic soda lime silicate glass products – Part 7: Wired or unwired channel shaped glass
EN 572-8:2012+A1:2016 Glass in building – Basic soda-lime silicate glass products – Part 8: Supplied and final cut sizes
EN 572-9:2004 Glass in building – Basic soda lime silicate glass products – Part 9: Evaluation of conformity/Product standard
EN 573-1:2004 Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 1: Numerical designation system
EN 573-2:1994 Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 2: Chemical symbol based designation system
EN 573-3:2019 Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 3: Chemical composition and form of products
EN 573-5:2007 Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 5: Codification of standardized wrought products
EN 575:1995 Aluminium and aluminium alloys – Master alloys produced by melting – Specifications
EN 576:2003 Aluminium and aluminium alloys – Unalloyed aluminium ingots for remelting – Specifications
EN 577:1995 Aluminium and aluminium alloys – Liquid metal – Specifications
EN 581-1:2017 Outdoor furniture – Seating and tables for camping, domestic and contract use – Part 1: General safety requirements
EN 581-2:2015 Outdoor furniture – Seating and tables for camping, domestic and contract use – Part 2: Mechanical safety requirements and test methods for seating
EN 581-2:2015/AC:2016 Outdoor furniture – Seating and tables for camping, domestic and contract use – Part 2: Mechanical safety requirements and test methods for seating
EN 581-3:2017 Outdoor furniture – Seating and tables for camping, domestic and contract use – Part 3: Mechanical safety requirements for tables
EN 586-1:1997 Aluminium and aluminium alloys – Forgings – Part 1: Technical conditions for inspection and delivery
EN 586-2:1994 Aluminium and aluminium alloys – Forgings – Part 2: Mechanical properties and additional property requirements
EN 586-3:2001 Aluminium and aluminium alloys – Forgings – Part 3: Tolerances on dimensions and form
EN 588-1:1996 Fibre-cement pipes for sewers and drains – Part 1: Pipes, joints and fittings for gravity systems
EN 588-2:2001 Fibre cement pipes for drains and sewers – Part 2: Manholes and inspection chambers
EN 589:2018 Automotive fuels – LPG – Requirements and test methods
EN 58:2012 Bitumen and bituminous binders – Sampling bituminous binders
EN 590:2013+A1:2017 Automotive fuels – Diesel – Requirements and test methods
EN 593:2017 Industrial valves – Metallic butterfly valves for general purposes
EN 594:2011 Timber structures – Test methods – Racking strength and stiffness of timber frame wall panels
EN 595:1995 Timber structures – Test methods – Test of trusses for the determination of strength and deformation behaviour
EN 596:1995 Timber structures – Test methods – Soft body impact test of timber framed walls
EN 597-1:2015 Furniture – Assessment of the ignitability of mattresses and upholstered bed bases – Part 1: Ignition source smouldering cigarette
EN 597-2:2015 Furniture – Assessment of the ignitability of mattresses and upholstered bed bases – Part 2: Ignition source: match flame equivalent
EN 598:2007+A1:2009 Ductile iron pipes, fittings, accessories and their joints for sewerage applications – Requirements and test methods
EN 599-1:2009+A1:2013 Durability of wood and wood-based products – Efficacy of preventive wood preservatives as determined by biological tests – Part 1: Specification according to use class
EN 599-2:2016 Durability of wood and wood-based products – Efficacy of preventive wood preservatives as determined by biological tests – Part 2: Labelling
EN 59:2016 Glass reinforced plastics – Determination of indentation hardness by means of a Barcol hardness tester
EN 6018:2017 Aerospace series – Test methods for metallic materials – Determination of density according to displacement method
EN 601:2004 Aluminium and aluminium alloys – Castings – Chemical composition of castings for use in contact with foodstuff
EN 6029:2017 Aerospace series – Rod-ends, adjustable, single fork with UNJ threaded shank min.
EN 602:2004 Aluminium and aluminium alloys – Wrought products – Chemical composition of semifinished products used for the fabrication of articles for use in contact with foodstuff
EN 603-1:1996 Aluminium and aluminium alloys – Wrought forging stock – Part 1: Technical conditions for inspection and delivery
EN 603-2:1996 Aluminium and aluminium alloys – Wrought forging stock – Part 2: Mechanical properties
EN 603-3:2000 Aluminium and aluminium alloys – Wrought forging stock – Part 3: Tolerances on dimensions and form
EN 6031:2015 Aerospace series – Fibre reinforced plastics – Test method – Determination of in-plane shear properties (± 45° tensile test)
EN 6032:2015 Aerospace series – Fibre reinforced plastics – Test method – Determination of the glass transition temperatures
EN 6033:2015 Aerospace series – Carbon fibre reinforced plastics – Test method – Determination of interlaminar fracture toughness energy – Mode I – GIC
EN 6034:2015 Aerospace series – Carbon fibre reinforced plastics – Test method – Determination of interlaminar fracture toughness energy – Mode II – GIIC
EN 6035:2015 Aerospace series – Fibre reinforced plastics – Test method – Determination of notched and unnotched tensile strength
EN 6036:2015 Aerospace series – Fibre reinforced plastics – Test method – Determination of notched, unnotched and filled hole compression strength
EN 6037:2015 Aerospace series – Fibre reinforced plastics – Test method – Determination of bearing strength
EN 6038:2015 Aerospace series – Fibre reinforced plastics – Test method – Determination of the compression strength after impact
EN 604-1:1997 Aluminium and aluminium alloys – Cast forging stock – Part 1: Technical conditions for inspection and delivery
EN 604-2:1997 Aluminium and aluminium alloys – Cast forging stock – Part 2: Tolerances on dimensions and form
EN 6041:2018 Aerospace series – Non-metallic materials – Test method – Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
EN 6046:2020 Aerospace series – Bearing, spherical, plain, in corrosion resisting steel – Narrow series – Dimensions and loads – Inch series
EN 6049-001:2018 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 001: Technical specification
EN 6049-002:2010 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 002: General and list of product standards
EN 6049-003:2018 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 003: Braided, tubular, expandable – Product standard
EN 6049-004:2019 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 004: Braided, tubular, high expandable – Product standard
EN 6049-005:2014 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 005: Sleeve flexible, post installation – Product standard
EN 6049-006:2012 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 006: Self-wrapping protective sleeve, flexible post installation – Product standard
EN 6049-007:2012 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres –
EN 6049-008:2017 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres –
EN 6049-009:2016 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres –
EN 6055:2019 Aerospace series – Rod-end with bearing EN 4265 in corrosion resisting steel, external threaded shank – Dimensions and loads – Inch series
EN 6056:2019 Aerospace series – Rod-end with bearing per EN 4614 with self lubricating liner in
EN 6059-100:2015 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 100: General
EN 6059-202:2016 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 202: Dimensions and mass
EN 6059-301:2017 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 301: Sun light exposure
EN 6059-302:2017 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 302: High temperature exposure
EN 6059-303:2017 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 303: Resistance to fluids
EN 6059-304:2017 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 304: Flammability
EN 6059-305:2019 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 305: Fluid absorption
EN 6059-308:2014 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 308: Rapid change of temperature
EN 6059-309:2018 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 309: Fire resistance when fitted on a cable bundle
EN 6059-402:2019 Aerospace Series – Electrical cables, installation – Protection sleeves – Test methods – Part 402: Bending properties
EN 6059-406:2014 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 406: Vibration
EN 6059-407:2019 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 407: Mark adherence and print permanence
EN 6059-501:2010 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 501: Voltage proof test
EN 6059-502:2014 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 502: Resistance to electrical arcs
EN 6059-503:2017 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 503: Temperature rise due to rated current injected on the sleeve
EN 6059-504:2014 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 504: Temperature rise within a loom due to self-heating when protected by a sleeve
EN 6059-601:2014 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 601: Open and close
EN 6064:2017 Aerospace series – Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
EN 6069:2009 Aerospace series – Rivet, 100° reduced flush head, close tolerance – Inch series
EN 606:2004 Bar coding – Transport and handling labels for steel products
EN 6072:2010 Aerospace series – Metallic materials – Test methods – Constant amplitude fatigue testing
EN 6075:2017 Aerospace series – Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) – Inch series
EN 6076:2017 Aerospace series – Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C) – Inch series
EN 607:2004 Eaves gutters and fittings made of PVC-U – Definitions, requirements and testing
EN 6080:2016 Aerospace series – Rivet, 100° normal flush head, close tolerance – Inch series
EN 6081:2016 Aerospace series – Rivet, universal head, close tolerance – Inch series
EN 609-1:2017 Agricultural and forestry machinery – Safety of log splitters – Part 1: Wedge splitters
EN 609-2:1999+A1:2009 Agricultural and forestry machinery – Safety of log splitters – Part 2: Screw splitters
EN 6090:2016 Aerospace series – Washer, retaining
EN 6092:2016 Aerospace series – Receptacle, floating, double lug
EN 6094:2016 Aerospace series – Washer, spring, countersunk
EN 6096:2019 Aerospace series – Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel – Dimensions and loads – Inch series
EN 6097:2019 Aerospace series – Bearing, spherical plain, metal to metal, extra wide inner ring in corrosion resisting steel – Dimensions and loads – Inch series
EN 6098:2019 Aerospace series – Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank – Dimensions and loads – Inch series
EN 6101:2016 Aerospace series – Rivet, 100° medium flush head, close tolerance – Inch series
EN 6105:2016 Aerospace series – Stud with shoulder
EN 6109:2018 Aerospace series – Static seal elements elastomer, moulded, phosphate ester resistant – Technical specification
EN 610:1995 Tin and tin alloys – Ingot tin
EN 611-1:1995 Tin and tin alloys – Pewter and pewterware – Part 1: Pewter
EN 611-2:1996 Tin and tin alloys – Pewter and pewterware – Part 2: Pewterware
EN 6113:2015 Aerospace series – Circuit breaker, connecting and attachment hardware
EN 6123:2016 Aerospace series – Fitting end, 24° internal cone, external thread, flareless type – Extra fine thread pitch – Inch series – Design standard
EN 6126:2018 Aerospace series – Fitting end, 24° internal cone, external thread, flareless type, size -32
EN 6128:2017 Aerospace series – Blind bolt, 100° flush head, high strength
EN 6129:2016 Aerospace series – Blind bolt, protruding head, high strength, pulltype
EN 6129:2016/AC:2017 Aerospace series – Blind bolt, protruding head, high strength, pulltype
EN 612:2005 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
EN 6133:2019 Aerospace series – Rod-end, with bearing per EN 6096, with self-lubricating liner in
EN 6138:2017 Aerospace series – Cap, protective, non-metallic for fitting ends ≤ 3 000 PSI hydraulic systems
EN 6139:2020 Aerospace series – Cap, protective, non-metallic, for EN 6123 fitting ends
EN 613:2000 Independent gas-fired convection heaters
EN 613:2000/A1:2003 Independent gas-fired convection heaters
EN 614-1:2006+A1:2009 Safety of machinery – Ergonomic design principles – Part 1: Terminology and general principles
EN 614-2:2000+A1:2008 Safety of machinery – Ergonomic design principles – Part 2: Interactions between the design of machinery and work tasks
EN 6141:2020 Aerospace series – Plug, protective, non-metallic, for EN 6123 fitting ends
EN 615:2009 Fire protection – Fire extinguishing media – Specifications for powders (other than class D powders)
EN 617:2001+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
EN 618:2002+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
EN 619:2002+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of unit loads
EN 620:2002+A1:2010 Continuous handling equipment and systems – Safety and EMC requirements for fixed belt conveyors for bulk materials
EN 622-1:2003 Fibreboards – Specifications – Part 1: General requirements
EN 622-2:2004 Fibreboards – Specifications – Part 2: Requirements for hardboards
EN 622-2:2004/AC:2005 Fibreboards – Specifications – Part 2: Requirements for hardboards
EN 622-3:2004 Fibreboards – Specifications – Part 3: Requirements for medium boards
EN 622-4:2019 Fibreboards – Specifications – Part 4: Requirements for softboards
EN 622-5:2009 Fibreboards – Specifications – Part 5: Requirements for dry process boards (MDF)
EN 623-1:2006 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 1: Determination of the presence of defects by dye penetration
EN 623-2:1993 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 2: Determination of density and porosity
EN 623-4:2004 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 4: Determination of surface roughness
EN 624:2011 Specification for dedicated LPG appliances – Room sealed LPG space heating equipment for installation in vehicles and boats
EN 627:1995 Specification for data logging and monitoring of lifts, escalators and passenger conveyors
EN 631-1:1993 Materials and articles in contact with foodstuffs – Catering containers – Part 1: Dimensions of containers
EN 631-2:1999 Materials and articles in contact with foodstuffs – Catering containers – Part 2: Dimensions of accessories and supports
EN 633:1993 Cement-bonded particleboards – Definition and classification
EN 634-1:1995 Cement-bonded particleboards – Specification – Part 1: General requirements
EN 634-2:2007 Cement-bonded particleboards – Specifications – Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
EN 635-1:1994 Plywood – Classification by surface appearance – Part 1: General
EN 635-2:1995 Plywood – Classification by surface appearance – Part 2: Hardwood
EN 635-3:1995 Plywood – Classification by surface appearance – Part 3: Softwood
EN 635-5:1999 Plywood – Classification by surface appearance – Part 5: Methods for measuring and expressing characteristics and defects
EN 636:2012+A1:2015 Plywood – Specifications
EN 637:1994 Plastics piping systems – Glass-reinforced plastics components – Determination of the amounts of constituents using the gravimetric method
EN 637:1994/AC:1995 Plastics piping systems – Glass-reinforced plastics components – Determination of the amounts of constituents using the gravimetric method
EN 639:1994 Common requirements for concrete pressure pipes including joints and fittings
EN 640:1994 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
EN 641:1994 Reinforced concrete pressure pipes, cylinder type, including joints and fittings
EN 642:1994 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirements for prestressing steel for pipes
EN 643:2014 Paper and board – European list of standard grades of paper and board for recycling
EN 645:1993 Paper and board intended to come into contact with foodstuffs – Preparation of a cold water extract
EN 646:2018 Paper and board intended to come into contact with foodstuffs – Determination of colour fastness of dyed paper and board
EN 647:1993 Paper and board intended to come into contact with foodstuffs – Preparation of a hot water extract
EN 648:2018 Paper and board intended to come into contact with foodstuffs – Determination of the fastness of fluorescent whitened paper and board
EN 650:2012 Resilient floor coverings – Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing – Specification
EN 651:2011 Resilient floor coverings – Polyvinyl chloride floor coverings with foam layer – Specification
EN 652:2011 Resilient floor coverings – Polyvinyl chloride floor coverings with cork-based backing – Specification
EN 655:2011 Resilient floor coverings – Tiles of agglomerated composition cork with polyvinyl chloride wear layer – Specification
EN 656:1999 Gas-fired central heating boilers – Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW
EN 656:1999/A1:2006 Gas-fired central heating boilers – Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW
EN 658-1:1998 Advanced technical ceramics – Mechanical properties of ceramic composites at room temperature – Part 1: Determination of tensile properties
EN 658-3:2002 Advanced technical ceramics – Mechanical properties of ceramic composites at room temperature – Part 3: Determination of flexural strength
EN 658-4:2003 Advanced technical ceramics – Mechanical properties of ceramic composites at room
EN 658-5:2002 Advanced technical ceramics – Mechanical properties of ceramic composites at room
EN 659:2003+A1:2008 Protective gloves for firefighters
EN 659:2003+A1:2008/AC:200
EN 660-2:1999 Resilient floor coverings – Determination of wear resistance – Part 2: Frick-Taber test
EN 660-2:1999/A1:2003 Resilient floor coverings – Determination of wear resistance – Part 2: Frick-Taber test
EN 661:1994 Resilient floor coverings – Determination of the spreading of water
EN 662:1994 Resilient floor coverings – Determination of curling exposure to moisture
EN 663:1994 Resilient floor coverings – Determination of conventional pattern depth
EN 665:1994 Resilient floor coverings – Determination of exudation of plasticizers
EN 666:1994 Resilient floor coverings – Determination of gelling
EN 669:1997 Resilient floor coverings – Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity
EN 671-1:2012 Fixed firefighting systems – Hose systems – Part 1: Hose reels with semi-rigid hose
EN 671-2:2012 Fixed firefighting systems – Hose systems – Part 2: Hose systems with lay-flat hose
EN 671-3:2009 Fixed firefighting systems – Hose systems – Part 3: Maintenance of hose reels with semirigid hose and hose systems with lay-flat hose
EN 673:2011 Glass in building – Determination of thermal transmittance (U value) – Calculation method
EN 674:2011 Glass in building – Determination of thermal transmittance (U value) – Guarded hot plate method
EN 675:2011 Glass in building – Determination of thermal transmittance (U value) – Heat flow meter method
EN 676:2020 Forced draught burners for gaseous fuels
EN 678:1993 Determination of the dry density of autoclaved aerated concrete
EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete
EN 680:2005 Determination of the drying shrinkage of autoclaved aerated concrete
EN 681-1:1996 Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 1: Vulcanized rubber
EN 681-1:1996/A1:1998 Elastomeric seals – Material requirements for pipe joint seals used in water and drainage applications – Part 1: Vulcanized rubber
EN 681-1:1996/A2:2002 Elastomeric seals – Material requirements for pipe joint seals used in water and drainage applications – Part 1: Vulcanized rubber
EN 681-1:1996/A3:2005 Elastomeric seals – Material requirements for pipe joint seals used in water and drainage applications – Part 1: Vulcanized rubber
EN 681-1:1996/AC:2002 Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 1: Vulcanized rubber
EN 681-2:2000 Elastomeric Seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 2: Thermoplastic elastomers
EN 681-2:2000/A1:2002 Elastomeric seals – Material requirements for pipe joint seals used in water and drainage applications – Part 2: Thermoplastic elastomers
EN 681-2:2000/A2:2005 Elastomeric seals – Material requirements for pipe joint seals used in water and drainage applications – Part 2: Thermoplastic elastomers
EN 681-3:2000 Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 3: Cellular materials of vulcanized rubber
EN 681-3:2000/A1:2002 Elastomeric seals – Material requirements for pipe joint seals used in water and drainage applications – Part 3: Cellular materials of vulcanized rubber
EN 681-3:2000/A2:2005 Elastomeric seals – Material requirements for pipe joint seals used in water and drainage applications – Part 3: Cellular materials of vulcanized rubber
EN 681-4:2000 Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 4: Cast polyurethane sealing elements
EN 681-4:2000/A1:2002 Elastomeric seals – Material requirements for pipe joint seals used in water and drainage applications – Part 4: Cast polyurethane sealing elements
EN 681-4:2000/A2:2005 Elastomeric seals – Material requirements for pipe joint seals used in water and drainage applications – 4: Cast polyurethane sealing elements
EN 682:2002 Elastomeric Seals – Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
EN 682:2002/A1:2005 Elastomeric seals – Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
EN 683-1:2006 Aluminium and aluminium alloys – Finstock – Part 1: Technical conditions for inspection and delivery
EN 683-2:2006 Aluminium and aluminium alloys – Finstock – Part 2: Mechanical properties
EN 683-3:2006 Aluminium and aluminium alloys – Finstock – Part 3: Tolerances on dimensions and form
EN 684:1995 Resilient floor coverings – Determination of seam strength
EN 686:2019 Resilient floor coverings – Specification for plain and decorative linoleum on a foam backing
EN 687:2019 Resilient floor coverings – Specification for plain and decorative linoleum on a corkment backing
EN 688:2011 Resilient floor coverings – Specification for corklinoleum
EN 689:2018+AC:2019 Workplace exposure – Measurement of exposure by inhalation to chemical agents – Strategy for testing compliance with occupational exposure limit values
EN 690:2013 Agricultural machinery – Manure spreaders – Safety
EN 694:2014 Fire-fighting hoses – Semi-rigid hoses for fixed systems
EN 695:2005 Kitchen sinks – Connecting dimensions
EN 7010:2020 Aerospace series – Configuration – Definition and designation for product standards for externally threaded fasteners
EN 703:2004+A1:2009 Agricultural machinery – Silage loading, mixing and/or chopping and distributing machines – Safety
EN 705:1994 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Methods for regression analysis and their use
EN 705:1994/AC:1995 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Methods for regression analysis and their use
EN 706:1996+A1:2009 Agricultural machinery – Vine shoot tipping machines – Safety
EN 707:2018 Agricultural machinery – Slurry tankers – Safety
EN 709:1997+A4:2009 Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) – Safety
EN 709:1997+A4:2009/AC:201
EN 71-10:2005 Safety of toys – Part 10: Organic chemical compounds – Sample preparation and extraction
EN 71-11:2005 Safety of toys – Part 11: Organic chemical compounds – Methods of analysis
EN 71-12:2016 Safety of toys – Part 12: N-Nitrosamines and N-nitrosatable substances
EN 71-13:2014 Safety of toys – Part 13: Olfactory board games, cosmetic kits and gustative games
EN 71-14:2018 Safety of toys – Part 14: Trampolines for domestic use
EN 71-1:2014+A1:2018 Safety of toys – Part 1: Mechanical and physical properties
EN 71-2:2011+A1:2014 Safety of toys – Part 2: Flammability
EN 71-3:2019 Safety of toys – Part 3: Migration of certain elements
EN 71-4:2013 Safety of toys – Part 4: Experimental sets for chemistry and related activities
EN 71-5:2015 Safety of toys – Part 5: Chemical toys (sets) other than experimental sets
EN 71-7:2014+A3:2020 Safety of toys – Part 7: Finger paints – Requirements and test methods
EN 71-8:2018 Safety of toys – Part 8: Activity toys for domestic use
EN 71-9:2005+A1:2007 Safety of toys – Part 9: Organic chemical compounds – Requirements
EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment
EN 710:1997+A1:2010/AC:201
EN 711:2016 Inland navigation vessels – Railings for decks and side decks – Requirements, designs and types
EN 716-1:2017+AC:2019 Furniture – Children’s cots and folding cots for domestic use – Part 1: Safety requirements
EN 716-2:2017 Furniture – Children’s cots and folding cots for domestic use – Part 2: Test methods
EN 717-1:2004 Wood-based panels – Determination of formaldehyde release – Part 1: Formaldehyde emission by the chamber method
EN 717-3:1996 Wood-based panels – Determination of formaldehyde release – Part 3: Formaldehyde release by the flask method
EN 720-1:1999 Transportable gas cylinders – Gases and gas mixtures – Part 1: Properties of pure gases
EN 721:2019 Leisure accommodation vehicles – Safety ventilation requirements
EN 722-1:2004 Leisure accommodation vehicles – Liquid fuel heating systems – Part 1: Caravans and caravan holiday homes
EN 723:2009 Copper and copper alloys – Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
EN 725-10:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 10: Determination of compaction properties
EN 725-11:2006 Advanced technical ceramics – Methods of test for ceramic powders – Part 11: Determination of densification on natural sintering
EN 725-12:2001 Advanced technical ceramics – Methods of test for ceramic powders – Part 12: Chemical analysis of zirconia
EN 725-1:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 1: Determination of impurities in alumina
EN 725-2:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 2: Determination of impurities in barium titanate
EN 725-3:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
EN 725-4:2006 Advanced technical ceramics – Methods of test for ceramic powders – Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
EN 725-5:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 5: Determination of particle size distribution
EN 725-5:2007/AC:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 5: Determination of particle size distribution
EN 726-1:1994 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 1: Systems overview
EN 726-2:1995 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 2: Security framework
EN 726-3:1994 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 3: Application independent card requirements
EN 726-4:1994 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 4: Application independent card related terminal requirements
EN 726-5:1999 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 5: Payment methods
EN 726-6:1995 Identification card system – Telecommunications integrated circuit(s) cards and terminals – Part 6: Telecommunication features
EN 726-7:1999 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 7: Security module
EN 732:1998 Specifications for dedicated liquefied petroleum gas appliances – Absorption refrigerators
EN 733:1995 End-suction centrifugal pumps, rating with 10 bar with bearing bracket – Nominal duty point, main dimensions, designation system
EN 734:1995 Side channel pumps PN 40 – Nominal duty point, main dimensions, designation system
EN 735:1995 Overall dimensions of rotodynamic pumps – Tolerances
EN 736-1:2018 Valves – Terminology – Part 1: Definition of types of valves
EN 736-2:2016 Valves – Terminology – Part 2: Definition of components of valves
EN 736-3:2008 Valves – Terminology – Part 3: Definition of terms
EN 73:2020 Durability of wood and wood-based products – Accelerated ageing of treated wood prior to biological testing – Evaporative ageing procedure
EN 74-1:2005 Couplers, spigot pins and baseplates for use in falsework and scaffolds – Part 1: Couplers for tubes – Requirements and test procedures
EN 74-2:2008 Couplers, spigot pins and baseplates for use in falsework and scaffolds – Part 2: Special couplers – Requirements and test procedures
EN 74-3:2007 Couplers, spigot pins and baseplates for use in falsework and scaffolds – Part 3: Plain base plates and spigot pins – Requirements and test procedures
EN 741:2000+A1:2010 Continuous handling equipment and systems – Safety requirements for systems and their components for pneumatic handling of bulk materials
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment – Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 746-2:2010 Industrial thermoprocessing equipment – Part 2: Safety requirements for combustion and fuel handling systems
EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment – Part 3: Safety requirements for the generation and use of atmosphere gases
EN 746-4:2000 Industrial thermoprocessing equipment – Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment
EN 746-5:2000 Industrial thermoprocessing equipment – Part 5: Particular safety requirements for salt bath thermoprocessing equipment
EN 746-8:2000 Industrial thermoprocessing equipment – Part 8: Particular safety requirements for quenching equipment
EN 747-1:2012+A1:2015 Furniture – Bunk beds and high beds – Part 1: Safety, strength and durability requirements
EN 747-2:2012+A1:2015 Furniture – Bunk beds and high beds – Part 2: Test methods
EN 748:2013+A1:2018 Playing field equipment – Football goals – Functional and safety requirements, test methods
EN 749:2004 Playing field equipment – Handball goals – Functional and safety requirements, test methods
EN 749:2004/AC:2005 Playing field equipment – Handball goals – Functional and safety requirements, test methods
EN 750:2004 Playing field equipment – Hockey goals – Functional and safety requirements, test methods
EN 750:2004/AC:2005 Playing field equipment – Hockey goals – Functional and safety requirements, test methods
EN 751-1:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 1: Anaerobic jointing compounds
EN 751-2:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 2: Non-hardening jointing compounds
EN 751-3:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 3: Unsintered PTFE tapes
EN 751-3:1996/AC:1997 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 3: Unsintered PTFE tapes
EN 752:2017 Drain and sewer systems outside buildings – Sewer system management
EN 754-1:2016 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 1: Technical conditions for inspection and delivery
EN 754-2:2016 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 2: Mechanical properties
EN 754-3:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 3: Round bars, tolerances on dimensions and form
EN 754-4:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 4: Square bars, tolerances on dimensions and form
EN 754-5:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 5: Rectangular bars, tolerances on dimensions and form
EN 754-6:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 6: Hexagonal bars, tolerances on dimensions and form
EN 754-7:2016 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 7: Seamless tubes, tolerances on dimensions and form
EN 754-8:2016 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 8: Porthole tubes, tolerances on dimensions and form
EN 755-1:2016 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 1: Technical conditions for inspection and delivery
EN 755-2:2016 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 2: Mechanical properties
EN 755-3:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 3: Round bars, tolerances on dimensions and form
EN 755-4:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 4: Square bars, tolerances on dimensions and form
EN 755-5:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 5: Rectangular bars, tolerances on dimensions and form
EN 755-6:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 6: Hexagonal bars, tolerances on dimensions and form
EN 755-7:2016 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 7: Seamless tubes, tolerances on dimensions and form
EN 755-8:2016 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 8: Porthole tubes, tolerances on dimensions and form
EN 755-9:2016 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 9: Profiles, tolerances on dimensions and form
EN 761:1994 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the creep factor under dry conditions
EN 761:1994/AC:1995 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the creep factor under dry conditions
EN 764-1:2015+A1:2016 Pressure equipment – Part 1: Vocabulary
EN 764-2:2012 Pressure equipment – Part 2: Quantities, symbols and units
EN 764-4:2014 Pressure equipment – Part 4: Establishment of technical delivery conditions for metallic materials
EN 764-5:2014 Pressure equipment – Part 5: Inspection documentation of metallic materials and compliance with the material specification
EN 764-7:2002 Pressure equipment – Part 7: Safety systems for unfired pressure equipment
EN 764-7:2002/AC:2006 Pressure equipment – Part 7: Safety systems for unfired pressure equipment
EN 765:1994 Sacks for the transport of food aid – Sacks made of woven polyolefin fabric other than polypropylene only
EN 766:1994 Sacks for the transport of food aid – Sacks made of jute fabric
EN 767:1994 Sacks for the transport of food aid – Sacks made of woven jute/polyolefin fabric
EN 768:1994 Sacks for the transport of food aid – Sacks made of lined cotton fabric
EN 769:1994 Sacks for the transport of food aid – Sacks made of woven cotton/polyolefin fabric
EN 76:1978 Packages for certain prepacked foodstuffs – Capacities of glass and metal containers
EN 770:1994 Sacks for the transport of food aid – Paper sacks
EN 771-1:2011+A1:2015 Specification for masonry units – Part 1: Clay masonry units
EN 771-2:2011+A1:2015 Specification for masonry units – Part 2: Calcium silicate masonry units
EN 771-3:2011+A1:2015 Specification for masonry units – Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
EN 771-4:2011+A1:2015 Specification for masonry units – Part 4: Autoclaved aerated concrete masonry units
EN 771-5:2011+A1:2015 Specification for masonry units – Part 5: Manufactured stone masonry units
EN 771-6:2011+A1:2015 Specification for masonry units – Part 6: Natural stone masonry units
EN 772-10:1999 Methods of test for masonry units – Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units
EN 772-11:2011 Methods of test for masonry units – Part 11: Determination of water absorption of
EN 772-13:2000 Methods of test for masonry units – Part 13: Determination of net and gross dry density of masonry units (except for natural stone)
EN 772-14:2001 Methods of test for masonry units – Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units
EN 772-15:2000 Methods of test for masonry units – Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units
EN 772-16:2011 Methods of test for masonry units – Part 16: Determination of dimensions
EN 772-18:2011 Methods of test for masonry units – Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units
EN 772-19:2000 Methods of test for masonry units – Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units
EN 772-1:2011+A1:2015 Methods of test for masonry units – Part 1: Determination of compressive strength
EN 772-20:2000 Methods of test for masonry units – Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units
EN 772-20:2000/A1:2005 Methods of test for masonry units – Part 20: Determination of flatness of faces of masonry units
EN 772-21:2011 Methods of test for masonry units – Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption
EN 772-22:2018 Methods of test for masonry units – Part 22: Determination of freeze/thaw resistance of clay masonry units
EN 772-2:1998 Methods of test for masonry units – Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
EN 772-2:1998/A1:2005 Methods of test for masonry units – Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
EN 772-3:1998 Methods of test for masonry units – Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing
EN 772-4:1998 Methods of test for masonry units – Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
EN 772-5:2016 Methods of test for masonry units – Part 5: Determination of the active soluble salts content of clay masonry units
EN 772-5:2016/AC:2017 Methods of test for masonry units – Part 5: Determination of the active soluble salts content of clay masonry units
EN 772-6:2001 Methods of test for masonry units – Part 6: Determination of bending tensile strength of aggregate concrete masonry units
EN 772-7:1998 Methods of test for masonry units – Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water
EN 772-9:1998 Methods of test for masonry units – Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
EN 772-9:1998/A1:2005 Methods of test for masonry units – Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
EN 787:1994 Sacks for the transport of food aid – Sacks made of polyethylene film
EN 788:1994 Sacks for the transport of food aid – Tubular sacks made of composite film
EN 789:2004 Timber structures – Test methods – Determination of mechanical properties of wood based panels
EN 790:2001 Inland navigation vessels – Stairs with inclination angles of 45° to 60° – Requirements, types
EN 794-3:1998+A2:2009 Lung ventilators – Part 3: Particular requirements for emergency and transport ventilators
EN 795:2012 Personal fall protection equipment – Anchor devices
EN 802:1994 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings for pressure piping systems – Test method for maximum deformation by crushing
EN 80369-5:2016 Small-bore connectors for liquids and gases in healthcare applications – Part 5: Connectors for limb cuff inflation applications
EN 80369-5:2016/AC:2017- 2
EN 805:2000 Water supply – Requirements for systems and components outside buildings
EN 806-1:2000 Specifications for installations inside buildings conveying water for human consumption – Part 1: General
EN 806-1:2000/A1:2001 Specifications for installations inside buildings conveying water for human consumption – Part 1: General
EN 806-2:2005 Specification for installations inside buildings conveying water for human consumption – Part 2: Design
EN 806-3:2006 Specifications for installations inside buildings conveying water for human consumption – Part 3: Pipe sizing – Simplified method
EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption – Part 4: Installation
EN 806-5:2012 Specifications for installations inside buildings conveying water for human consumption – Part 5: Operation and maintenance
EN 809:1998+A1:2009 Pumps and pump units for liquids – Common safety requirements
EN 809:1998+A1:2009/AC:201
EN 80:2001 Wall-hung urinals – Connecting dimensions
EN 81-20:2020 Safety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 20: Passenger and goods passenger lifts
EN 81-21:2018 Safety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 21: New passenger and goods passenger lifts in existing building
EN 81-22:2014 Safety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 22: Electric lifts with inclined path
EN 81-28:2018+AC:2019 Safety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 28: Remote alarm on passenger and goods passenger lifts
EN 81-31:2010 Safety rules for the construction and installation of lifts – Lifts for the transport of goods only – Part 31: Accessible goods only lifts
EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts – Part 3: Electric and hydraulic service lifts
EN 81- 3:2000+A1:2008/AC:2009
EN 81-40:2020 Safety rules for the construction and installation of lifts – Special lifts for the transport of
EN 81-41:2010 Safety rules for the construction and installation of lifts – Special lifts for the transport of
EN 81-43:2009 Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 43: Lifts for cranes
EN 81-50:2020 Safety rules for the construction and installation of lifts – Examinations and tests – Part 50: Design rules, calculations, examinations and tests of lift components
EN 81-58:2018 Safety rules for the construction and installation of lifts – Examination and tests – Part 58: Landing doors fire resistance test
EN 81-70:2018 Safety rules for the construction and installation of lifts – Particular applications for
EN 81-71:2018+AC:2019 Safety rules for the construction and installation of lifts – Particular applications to passenger lifts and goods passenger lifts – Part 71: Vandal resistant lifts
EN 81-72:2020 Safety rules for the construction and installation of lifts – Particular applications for passenger and goods passenger lifts – Part 72: Firefighters lifts
EN 81-73:2020 Safety rules for the construction and installation of lifts – Particular applications for passenger and goods passenger lifts – Part 73: Behaviour of lifts in the event of fire
EN 81-77:2018 Safety rules for the construction and installations of lifts – Particular applications for passenger and goods passenger lifts – Part 77: Lifts subject to seismic conditions
EN 81-80:2019 Safety rules for the construction and installation of lifts – Existing lifts – Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts
EN 81-82:2013 Safety rules for the construction and installation of lifts – Existing lifts – Part 82: Rules for
EN 810:1997 Dehumidifiers with electrically driven compressors – Rating tests, marking, operational requirements and technical data sheet
EN 812:2012 Industrial bump caps
EN 813:2008 Personal fall protection equipment – Sit harnesses
EN 816:2017 Sanitary tapware – Automatic shut-off valves PN 10
EN 817:2008 Sanitary tapware – Mechanical mixing valves (PN 10) – General technical specifications
EN 818-1:1996+A1:2008 Short link chain for lifting purposes – Safety – Part 1: General conditions of acceptance
EN 818-2:1996+A1:2008 Short link chain for lifting purposes – Safety – Part 2: Medium tolerance chain for chain slings – Grade 8
EN 818-3:1999+A1:2008 Short link chain for lifting purposes – Safety – Part 3: Medium tolerance chain for chain slings – Grade 4
EN 818-4:1996+A1:2008 Short link chain for lifting purposes – Safety – Part 4: Chain slings – Grade 8
EN 818-5:1999+A1:2008 Short link chain for lifting purposes – Safety – Part 5: Chain slings – Grade 4
EN 818-6:2000+A1:2008 Short link chain for lifting purposes – Safety – Part 6: Chain slings – Specification for information for use and maintenance to be provided by the manufacturer
EN 818-7:2002+A1:2008 Short link chain for lifting purposes – Safety – Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
EN 820-1:2002 Advanced technical ceramics – Methods of testing monolithic ceramics –
EN 820-2:2003 Advanced technical ceramics – Methods of testing monolithic ceramics – Thermomechanical properties – Part 2: Determination of self-loaded deformation
EN 820-3:2004 Advanced technical ceramics – Methods of testing monolithic ceramics –
EN 820-4:2009 Advanced technical ceramics – Thermomechanical properties of monolithic ceramics – Part 4: Determination of flexural creep deformation at elevated temperatures
EN 820-5:2009 Advanced technical ceramics – Thermomechanical properties of monolithic ceramics – Part 5: Determination of elastic moduli at elevated temperatures
EN 821-1:1995 Advanced technical ceramics – Monolithic ceramics – Thermo-physical properties – Part 1: Determination of thermal expansion
EN 821-2:1997 Advanced technical ceramics – Monolithic ceramics – Thermo-physical properties – Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
EN 821-3:2005 Advanced technical ceramics – Monolithic ceramics. Thermo-physical properties – Part 3: Determination of specific heat capacity
EN 822:2013 Thermal insulating products for building applications – Determination of length and width
EN 823:2013 Thermal insulating products for building applications – Determination of thickness
EN 824:2013 Thermal insulating products for building applications – Determination of squareness
EN 825:2013 Thermal insulating products for building applications – Determination of flatness
EN 826:2013 Thermal insulating products for building applications – Determination of compression behaviour
EN 827:2005 Adhesives – Determination of conventional solids content and constant mass solids content
EN 828:2013 Adhesives – Wettability – Determination by measurement of contact angle and surface free energy of solid surface
EN 834:2013 Heat cost allocators for the determination of the consumption of room heating radiators – Appliances with electrical energy supply
EN 834:2013/AC:2015 Heat cost allocators for the determination of the consumption of room heating radiators – Appliances with electrical energy supply
EN 835:1994 Heat cost allocators for the determination of the consumption of room heating radiators – Appliances without an electrical energy supply, based on the evaporation principle
EN 837-1:1996 Pressure gauges – Part 1: Bourdon tube pressure gauges – Dimensions, metrology, requirements and testing
EN 837-1:1996/AC:1998 Pressure gauges – Part 1: Bourdon tube pressure gauges – Dimensions, metrology, requirements and testing
EN 837-2:1997 Pressure gauges – Part 2: Selection and installation recommendations for pressure gauges
EN 837-3:1996 Pressure gauges – Part 3: Diaphragm and capsule pressure gauges – Dimensions, metrology, requirements and testing
EN 838:2010 Workplace exposure – Procedures for measuring gases and vapours using diffusive samplers – Requirements and test methods
EN 839:2014 Wood preservatives – Determination of the protective effectiveness against wood destroying basidiomycetes – Application by surface treatment
EN 840-1:2020 Mobile waste and recycling containers – Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices – Dimensions and design
EN 840-2:2020 Mobile waste and recycling containers – Part 2: Containers with 4 wheels with a capacity
EN 840-3:2020 Mobile waste and recycling containers – Part 3: Containers with 4 wheels with a capacity
EN 840-4:2020 Mobile waste and recycling containers – Part 4: Containers with 4 wheels with a capacity
EN 840-5:2020 Mobile waste and recycling containers – Part 5: Performance requirements and test methods
EN 840-6:2020 Mobile waste and recycling containers – Part 6: Safety and health requirements
EN 841:1995 Bar coding – Symbology specifications – Format Description
EN 842:1996+A1:2008 Safety of machinery – Visual danger signals – General requirements, design and testing
EN 843-1:2006 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 1: Determination of flexural strength
EN 843-2:2006 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room
EN 843-3:2005 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room
EN 843-4:2005 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 4: Vickers, Knoop and Rockwell superficial hardness
EN 843-5:2006 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 5: Statistical analysis
EN 843-6:2009 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 6: Guidance for fractographic investigation
EN 843-7:2010 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 7: C-ring tests
EN 843-8:2010 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 8: Guidelines for conducting proof tests
EN 844:2019 Round and sawn timber – Terminology
EN 845-1:2013+A1:2016 Specification for ancillary components for masonry – Part 1: Wall ties, tension straps, hangers and brackets
EN 845-2:2013+A1:2016 Specification for ancillary components for masonry – Part 2: Lintels
EN 845-3:2013+A1:2016 Specification for ancillary components for masonry – Part 3: Bed joint reinforcement of steel meshwork
EN 846-10:2000 Methods of test for ancillary components for masonry – Part 10: Determination of load capacity and load deflection characteristics of brackets
EN 846-11:2000 Methods of test for ancillary components for masonry – Part 11: Determination of dimensions and bow of lintels
EN 846-13:2001 Methods of test for ancillary components for masonry – Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings
EN 846-14:2012 Methods of test for ancillary components for masonry – Part 14: Determination of the initial
EN 846-2:2000 Methods of test for ancillary components for masonry – Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
EN 846-3:2000 Methods of test for ancillary components for masonry – Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement
EN 846-4:2001 Methods of test for ancillary components for masonry – Part 4: Determination of load capacity and load-deflection characteristics of straps
EN 846-4:2001/A1:2004 Methods of test for ancillary components for masonry – Part 4: Determination of load capacity and load-deflection characteristics of straps
EN 846-5:2012 Methods of test for ancillary components for masonry – Part 5: Determination of tensile
EN 846-6:2012 Methods of test for ancillary components for masonry – Part 6: Determination of tensile
EN 846-7:2012 Methods of test for ancillary components for masonry – Part 7: Determination of shear load
EN 846-8:2000 Methods of test for ancillary components for masonry – Part 8: Determination of load capacity and load-deflection characteristics of joist hangers
EN 846-8:2000/A1:2006 Methods of test for ancillary components for masonry – Part 8: Determination of load capacity and load-deflection characteristics of joist hangers
EN 846-9:2016 Methods of test for ancillary components for masonry – Part 9: Determination of flexural resistance and shear resistance of lintels
EN 847-1:2017 Tools for woodworking – Safety requirements – Part 1: Milling tools, circular saw blades
EN 847-2:2017 Tools for woodworking – Safety requirements – Part 2: Requirements for the shank of shank mounted milling tools/circular saw blades
EN 847-3:2013 Tools for woodworking – Safety requirements – Part 3: Clamping devices
EN 848-2:2007+A2:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 2: Single spindle hand fed/integrated fed routing machines
EN 84:2020 Durability of wood and wood-based products – Accelerated ageing of treated wood prior to biological testing – Leaching procedure
EN 851:2014 Aluminium and aluminium alloys – Circle and circle stock for the production of culinary utensils – Specifications
EN 853:2015 Rubber hoses and hose assemblies – Wire braid reinforced hydraulic type – Specification
EN 854:2015 Rubber hoses and hose assemblies – Textile reinforced hydraulic type – Specification
#NAZWA?
EN 857:2015 Rubber hoses and hose assemblies – Wire braid reinforced compact type for hydraulic applications – Specification
EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) – Part 1: Principles of product design, performance and testing, marking and quality control
EN 858-1:2002/A1:2004 Separator systems for light liquids (e.g. oil and petrol) – Part 1: Principles of product design, performance and testing, marking and quality control
EN 858-2:2003 Separator systems for light liquids (e.g. oil and petrol) – Part 2: Selection of nominal size, installation, operation and maintenance
EN 862:2016 Packaging – Child-resistant packaging – Requirements and testing procedures for nonreclosable packages for non-pharmaceutical products
EN 863:1995 Protective clothing – Mechanical properties – Test method: Puncture resistance
EN 867-5:2001 Non-biological systems for use in sterilizers – Part 5: Specification for indicator systems
EN 868-10:2018 Packaging for terminally sterilized medical devices – Part 10: Adhesive coated nonwoven materials of polyolefines – Requirements and test methods
EN 868-2:2017 Packaging for terminally sterilized medical devices – Part 2: Sterilization wrap – Requirements and test methods
EN 868-3:2017 Packaging for terminally sterilized medical devices – Part 3: Paper for use in the
EN 868-4:2017 Packaging for terminally sterilized medical devices – Part 4: Paper bags – Requirements and test methods
EN 868-5:2018 Packaging for terminally sterilized medical devices – Part 5: Sealable pouches and reels of porous materials and plastic film construction – Requirements and test methods
EN 868-6:2017 Packaging for terminally sterilized medical devices – Part 6: Paper for low temperature sterilization processes – Requirements and test methods
EN 868-7:2017 Packaging for terminally sterilized medical devices – Part 7: Adhesive coated paper for low temperature sterilization processes – Requirements and test methods
EN 868-8:2018 Packaging for terminally sterilized medical devices – Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 – Requirements and test methods
EN 868-9:2018 Packaging for terminally sterilized medical devices – Part 9: Uncoated nonwoven materials of polyolefines – Requirements and test methods
EN 869:2006+A1:2009 Safety of machinery – Safety requirements for pressure metal diecasting units
EN 872:2005 Water quality – Determination of suspended solids – Method by filtration through glass fibre filters
EN 877:1999 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 877:1999/A1:2006 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 877:1999/A1:2006/AC:200
EN 878:2016 Chemicals used for treatment of water intended for human consumption – Aluminium sulfate
EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances – Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances – Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
EN 882:2016 Chemicals used for treatment of water intended for human consumption – Sodium aluminate
EN 885:2004 Chemicals used for treatment of water intended for human consumption – Polyaluminium chloride hydroxide silicate
EN 886:2004 Chemicals used for treatment of water intended for human consumption – Polyaluminium hydroxide silicate sulfate
EN 887:2016 Chemicals used for treatment of water intended for human consumption – Aluminium iron (III) sulfate
EN 888:2004 Chemicals used for treatment of water intended for human consumption – Iron (III) chloride
EN 889:2004 Chemicals used for treatment of water intended for human consumption – Iron (II) sulfate
EN 890:2012 Chemicals used for treatment of water intended for human consumption – Iron (III) sulfate solution
EN 891:2004 Chemicals used for treatment of water intended for human consumption – Iron (III) chloride sulfate
EN 892:2012+A1:2016 Mountaineering equipment – Dynamic mountaineering ropes – Safety requirements and test methods
EN 893:2019 Mountaineering equipment – Crampons – Safety requirements and test methods
EN 894-1:1997+A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control
EN 894-2:1997+A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 2: Displays
EN 894-3:2000+A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 3: Control actuators
EN 894-4:2010 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 4: Location and arrangement of displays and control actuators
EN 896:2012 Chemicals used for treatment of water intended for human consumption – Sodium hydroxide
EN 897:2012 Chemicals used for treatment of water intended for human consumption – Sodium carbonate
EN 898:2012 Chemicals used for treatment of water intended for human consumption – Sodium hydrogen carbonate
EN 899:2009 Chemicals used for treatment of water intended for human consumption – Sulphuric acid
EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
EN 900:2014 Chemicals used for treatment of water intended for human consumption – Calcium hypochlorite
EN 901:2013 Chemicals used for treatment of water intended for human consumption – Sodium hypochlorite
EN 902:2016 Chemicals used for treatment of water intended for human consumption – Hydrogen peroxide
EN 903:1993 Water quality – Determination of anionic surfactants by measurement of the methylene blue index MBAS (ISO 7875-1:1984 modified)
EN 908:1999+A1:2009 Agricultural and forestry machinery – Reel machines for irrigation – Safety
EN 909:1998+A1:2009 Agricultural and forestry machinery – Centre pivot and moving lateral types irrigation machines – Safety
EN 9100:2018 Quality Management Systems – Requirements for Aviation, Space and Defence Organizations
EN 9101:2018 Quality Management Systems – Audit Requirements for Aviation, Space, and Defence Organisations
EN 9102:2015 Aerospace series – Quality systems – First article inspection requirements
EN 9103:2014 Aerospace series – Quality management systems – Variation management of key characteristics
EN 9103:2014/AC:2015 Aerospace series – Quality management systems – Variation management of key characteristics
EN 9104-001:2013 Aerospace series – Quality management systems – Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs
EN 9104-002:2016 Aerospace series – Quality management systems – Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs
EN 9104-003:2010 Aerospace series – Quality management systems – Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification
EN 9107:2018 Aerospace series – Quality systems – Direct Delivery Authorization – Guidance for Aerospace Companies
EN 9110:2018 Quality Management Systems – Requirements for Aviation Maintenance Organizations
EN 9114:2015 Aerospace series – Quality systems – Direct Ship Guidance for Aerospace Companies
EN 9115:2018 Quality Management Systems – Requirements for Aviation, Space and Defense Organizations – Deliverable Software (Supplement to EN 9100)
EN 9116:2015 Aerospace series – Notice of Change (NOC) Requirements
EN 9117:2017 Aerospace series – Delegated Product Release Verification
EN 9120:2018 Quality Management Systems – Requirements for Aviation, Space and Defence Distributors
EN 912:2011 Timber fasteners – Specifications for connectors for timbers
EN 9130:2020 Aerospace series – Quality systems – Record retention
EN 9131:2020 Aerospace series – Quality Management Systems – Nonconformance Data Definition and Documentation
EN 9132:2017 Aerospace series – Quality management systems – Data Matrix Quality Requirements for Parts Marking
EN 9133:2018 Aerospace series – Quality Management Systems – Qualification Procedure for Aerospace Standard Products
EN 9136:2018 Aerospace series – Root cause analysis and problem solving (9S Methodology)
EN 9137:2012 Quality management systems – Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System
EN 9138:2019 Aerospace Series – Quality Management Systems – Statistical Product – Acceptance Requirements
EN 913:2018 Gymnastic equipment – General safety requirements and test methods
EN 9145:2018 Aerospace series – Requirements for Advanced Product Quality Planning and Production Part Approval Process
EN 9146:2018 Aerospace series – Foreign Object Damage (FOD) Prevention Program – Requirements for Aviation, Space, and Defence Organizations
EN 914:2020 Gymnastic equipment – Parallel bars and combination asymmetric/parallel bars – Requirements and test methods including safety
EN 915:2008 Gymnastic equipment – Asymmetric bars – Requirements and test methods including safety
EN 9162:2018 Aerospace series – Aerospace Operator Self-Verification Programs
EN 916:2003 Gymnastic equipment – Vaulting boxes – Requirements and test methods including safety
EN 917:1997 Plastics piping systems – Thermoplastics valves – Test methods for resistance to internal pressure and leaktightness
EN 9200:2004 Aerospace series – Programme management – Guidelines for project management specification
EN 920:2000 Paper and board intended to come into contact with foodstuffs – Determination of dry matter content in an aqueous extract
EN 9223-100:2018 Programme Management – Configuration Management – Part 100: A guide for the application of the principles of configuration management
EN 9223-101:2018 Programme Management – Configuration Management – Part 101: Configuration identification
EN 9223-102:2018 Programme Management – Configuration Management – Part 102: Configuration status accounting
EN 9223-103:2018 Programme Management – Configuration Management – Part 103: Configuration Verifications, Reviews and Audits
EN 9223-104:2018 Programme Management – Configuration Management – Part 104: Configuration Control
EN 9223-105:2018 Programme Management – Configuration Management – Part 105: Glossary
EN 9239:2016 Aerospace series – Programme Management – Guide for the risk management
EN 923:2015 Adhesives – Terms and definitions
EN 924:2003 Adhesives – Solvent-borne and solvent-free adhesives – Determination of flashpoint
EN 926-1:2015 Paragliding equipment – Paragliders – Part 1: Requirements and test methods for structural strength
EN 926-2:2013 Paragliding equipment – Paragliders – Part 2: Requirements and test methods for classifying flight safety characteristics
EN 927-10:2019 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 10: Resistance to blocking of paints and varnishes on wood
EN 927-11:2020 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 11: Assessment of air inclusions/microfoam in coating films
EN 927-13:2019 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 13: Assessment of resistance to impact of a coating on a wooden substrate
EN 927-1:2013 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 1: Classification and selection
EN 927-2:2014 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 2: Performance specification
EN 927-3:2019 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 3: Natural weathering test
EN 927-5:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 5: Assessment of the liquid water permeability
EN 927-6:2018 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
EN 927-7:2020 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 7: Assessment of knot staining resistance of wood coatings
EN 9277:2015 Aerospace series – Programme Management – Guide for the management of Systems Engineering
EN 9278:2018 Aerospace series – General Principles of Obsolescence Management of chemicals, materials and processes
EN 9300-002:2018 Aerospace series – LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 002: Requirements
EN 9300-003:2012 Aerospace series – LOTAR – Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 003: Fundamentals and concepts
EN 9300-004:2013 Aerospace series – LOTAR – Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 004: Description methods
EN 9300-005:2017 Aerospace series – LOTAR – LOng Term Archiving and Retrieval of digital technical
EN 9300-007:2017 Aerospace series – LOTAR -LOng Term Archiving and Retrieval of digital technical
EN 9300-010:2018 Aerospace series – LOTAR – LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 010: Overview Data Flow
EN 9300-011:2013 Aerospace series – LOTAR Long Term Archiving and Retrieval of digital technical product
EN 9300-012:2013 Aerospace series – LOTAR Long Term Archiving and Retrieval of digital technical product
EN 9300-013:2013 Aerospace series – LOTAR LOng Term Archiving and Retrieval of digital technical product
EN 9300-014:2013 Aerospace series – LOTAR – LOng Term Archiving and Retrieval of digital technical
EN 9300-015:2013 Aerospace series – LOTAR – LOng Term Archiving and Retrieval of digital technical
EN 9300-100:2018 Aerospace series – LOTAR – Long Term Archiving and Retrieval of digital technical
EN 9300-110:2018 Aerospace series – LOTAR -LOng Term Archiving and Retrieval of digital technical
EN 9300-115:2018 Aerospace series – LOTAR – LOng Term Archiving and Retrieval of digital technical
EN 9300-200:2018 Aerospace series – LOTAR – LOng Term Archiving and Retrieval of digital technical
EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines – Roughing, scouring, polishing and trimming machines – Safety requirements
EN 931:1997+A2:2009 Footwear manufacturing machines – Lasting machines – Safety requirements
EN 932-1:1996 Tests for general properties of aggregates – Part 1: Methods for sampling
EN 932-2:1999 Tests for general properties of aggregates – Part 2: Methods for reducing laboratory samples
EN 932-3:1996 Tests for general properties of aggregates – Part 3: Procedure and terminology for simplified petrographic description
EN 932-3:1996/A1:2003 Tests for general properties of aggregates – Part 3: Procedure and terminology for simplified petrographic description
EN 932-5:2012 Tests for general properties of aggregates – Part 5: Common equipment and calibration
EN 932-5:2012/AC:2014 Tests for general properties of aggregates – Part 5: Common equipment and calibration
EN 932-6:1999 Tests for general properties of aggregates – Part 6: Definitions of repeatability and reproducibility
EN 9320:2014 Aerospace series – Programme Management – General guidelines for acquisition and supply of open systems
EN 933-10:2009 Tests for geometrical properties of aggregates – Part 10: Assessment of fines – Grading of filler aggregates (air jet sieving)
EN 933-11:2009 Tests for geometrical properties of aggregates – Part 11: Classification test for the constituents of coarse recycled aggregate
EN 933-11:2009/AC:2009 Tests for geometrical properties of aggregates – Part 11: Classification test for the constituents of coarse recycled aggregate
EN 933-1:2012 Tests for geometrical properties of aggregates – Part 1: Determination of particle size distribution – Sieving method
EN 933-2:2020 Tests for geometrical properties of aggregates – Part 2: Determination of particle size distribution – Test sieves, nominal size of apertures
EN 933-3:2012 Tests for geometrical properties of aggregates – Part 3: Determination of particle shape – Flakiness index
EN 933-4:2008 Tests for geometrical properties of aggregates – Part 4: Determination of particle shape – Shape index
EN 933-5:1998 Tests for geometrical properties of aggregates – Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
EN 933-5:1998/A1:2004 Tests for geometrical properties of aggregates – Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
EN 933-6:2014 Tests for geometrical properties of aggregates – Part 6: Assessment of surface characteristics – Flow coefficient of aggregates
EN 933-7:1998 Tests for geometrical properties of aggregates – Part 7: Determination of shell content – Percentage of shells in coarse aggregates
EN 933-8:2012+A1:2015 Tests for geometrical properties of aggregates – Part 8: Assessment of fines – Sand equivalent test
EN 933-9:2009+A1:2013 Tests for geometrical properties of aggregates – Part 9: Assessment of fines – Methylene blue test
EN 934-1:2008 Admixtures for concrete, mortar and grout – Part 1: Common requirements
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout – Part 2: Concrete admixtures – Definitions, requirements, conformity, marking and labelling
EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout – Part 3: Admixtures for masonry mortar – Definitions, requirements, conformity and marking and labelling
EN 934-4:2009 Admixtures for concrete, mortar and grout – Part 4: Admixtures for grout for prestressing tendons – Definitions, requirements, conformity, marking and labelling
EN 934-5:2007 Admixtures for concrete, mortar and grout – Part 5: Admixtures for sprayed concrete – Definitions, requirements, conformity, marking and labelling
EN 934-6:2019 Admixtures for concrete, mortar and grout – Part 6: Sampling, assessment and verification of the constancy of performance
EN 935:2004 Chemicals used for treatment of water intended for human consumption – Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric)
EN 936:2013 Chemicals used for treatment of water intended for human consumption – Carbon dioxide
EN 937:2016 Chemicals used for treatment of water intended for human consumption – Chlorine
EN 938:2016 Chemicals used for treatment of water intended for human consumption – Sodium chlorite
EN 939:2016 Chemicals used for treatment of water intended for human consumption – Hydrochloric acid
EN 941:2014 Aluminium and aluminium alloys – Circle and circle stock for the production of general applications – Specifications
EN 942:2007 Timber in joinery – General requirements
EN 943-1:2015+A1:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid
EN 943-2:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid
EN 947:1998 Hinged or pivoted doors – Determination of the resistance to vertical load
EN 948:1999 Hinged or pivoted doors – Determination of the resistance to static torsion
EN 949:1998 Windows and curtain walling, doors, blinds and shutters – Determination of the resistance to soft and heavy body impact for doors
EN 950:1999 Door leaves – Determination of the resistance to hard body impact
EN 951:1998 Door leaves – Method for measurement of height, width, thickness and squareness
EN 952:1999 Door leaves – General and local flatness – Measurement method
EN 957-2:2003 Stationary training equipment – Part 2: Strength training equipment, additional specific safety requirements and test methods
EN 957-6:2010+A1:2014 Stationary training equipment – Part 6: Treadmills, additional specific safety requirements and test methods
EN 957-7:1998 Stationary training equipment – Part 7: Rowing machines, additional specific safety requirements and test methods
EN 958:2017 Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods
EN 959:2018 Mountaineering equipment – Rock anchors – Safety requirements and test methods
EN 960:2006 Headforms for use in the testing of protective helmets
EN 966:2012+A1:2012 Helmets for airborne sports
EN 969:2009 Ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods
EN 972:1998+A1:2010 Tannery machines – Reciprocating roller machines – Safety requirements
EN 972:1998+A1:2010/AC:201
EN 973:2009 Chemicals used for treatment of water intended for human consumption – Sodium chloride for regeneration of ion exchangers
EN 974:2003 Chemicals used for treatment of water intended for human consumption – Phosphoric acid
EN 975-1:2009 Sawn timber – Appearance grading of hardwoods – Part 1: Oak and beech
EN 975-1:2009/AC:2010 Sawn timber – Appearance grading of hardwoods – Part 1: Oak and beech
EN 975-2:2004 Sawn timber – Appearance grading of hardwoods – Part 2: Poplars
EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP) – Horizontal cylindrical tanks for the
EN 976-2:1997 Underground tanks of glass-reinforced plastics (GRP) – Horizontal cylindrical tanks for the
EN 977:1997 Underground tanks of glass-reinforced plastics (GRP) – Method for one side exposure to fluids
EN 978:1997 Underground tanks of glass-reinforced plastics (GRP) – Determination of factor alpha and factor beta
EN 981:1996+A1:2008 Safety of machinery – System of auditory and visual danger and information signals
EN 984:2001 Textile floor coverings – Determination of the mass per unit area of the use surface of needled floor coverings
EN 985:2001 Textile floor coverings – Castor chair test
EN 986:2005 Textile floor coverings – Tiles – Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
EN 988:1996 Zinc and zinc alloys – Specifications for rolled flat products for building
EN 989:1995 Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the the “Push-Out” test
EN 990:2002 Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
EN 991:1995 Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 992:1995 Determination of the dry density of lightweight aggregate concrete with open structure
EN 993-10:1997 Methods of test for dense shaped refractory products – Part 10: Determination of permanent change in dimensions on heating
EN 993-11:2007 Methods of test for dense shaped refractory products – Part 11: Determination of resistance to thermal shock
EN 993-12:1997 Methods of test for dense shaped refractory products – Part 12: Determination of pyrometric cone equivalent (refractoriness)
EN 993-13:1995 Methods of test for dense shaped refractory products – Part 13: Specification for pyrometric reference cones for laboratory use
EN 993-15:2005 Methods of test for dense shaped refractory products – Determination of thermal conductivity by the hot-wire (parallel) method
EN 993-16:1995 Dense shaped refractory products – Methods of test – Part 16: Determination of resistance to sulphuric acid
EN 993-17:1998 Methods of test for dense shaped refractory products – Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
EN 993-18:2002 Methods of test for dense shaped refractory products – Part 18: Determination of bulk density of granular materials by the water method with vacuum
EN 993-19:2004 Methods of test for dense shaped refractory products – Part 19: Determination of thermal expansion by a differential method
EN 993-1:2018 Methods of test for dense shaped refractory products – Part 1: Determination of bulk density, apparent porosity and true porosity
EN 993-2:1995 Methods of test for dense shaped refractory products – Part 2: Determination of true density
EN 993-2:1995/A1:2003 Methods of test for dense shaped refractory products – Part 2 : Determination of true density
EN 993-3:1997 Methods of test for dense shaped refractory products – Part 3: Test methods for carboncontaining refractories
EN 993-4:1995 Methods of test for dense shaped refractory products – Part 4: Determination of permeability to gases
EN 993-5:2018 Methods of test for dense shaped refractory products – Part 5: Determination of cold crushing strength
EN 993-6:2018 Methods of test for (dense) shaped refractory products – Part 6: Determination of modulus of rupture at ambient temperature
EN 993-7:1998 Methods of test for dense shaped refractory products – Part 7: Determination of modulus of rupture at elevated temperatures
EN 993-9:1997 Methods of testing dense shaped refractory products – Part 9: Determination of creep in compression
EN 995:1995 Textile floor coverings – Assessment of the creep of the backings
EN 997:2018 WC pans and WC suites with integral trap
EN 998-1:2016 Specification for mortar for masonry – Part 1: Rendering and plastering mortar
EN 998-2:2016 Specification for mortar for masonry – Part 2: Masonry mortar
